Services
Contact Us
Seen across a full year, the outside of a home takes a relentless battering. Winter damp encourages moss and algae, spring brings pollen and sap, summer bakes on dust and grime, and autumn buries everything under fallen leaves, so by the time the cycle comes round again the property can look thoroughly tired. Exterior cleaning is the reset that keeps on top of it, and it works best when the whole outside of a building is treated together rather than surface by surface. Pro Clean Xtreme takes that approach with homes in Alwalton, assessing each part of a property before choosing how to treat it. The benefit runs deeper than appearance, since the algae, moss and lichen that a year of weather encourages hold moisture against masonry, render and roofing, and that damp is what loosens pointing, feeds rot and slowly breaks materials down. Clearing it away protects the fabric of the building and heads off far costlier repairs. A cared-for exterior lifts the standing of a home as well, which matters whether it is lived in, sold or let. Because every house combines different materials, from brick and render to timber, plastic, glass, paving and roofing, matching the right method to each is what marks out a proper clean, with pressure, solution and dwell time all adjusted to suit. For households in Alwalton, keeping the exterior clean on a sensible rhythm through the year means a home that looks consistently well-kept and holds its condition rather than sliding backwards each season. The sections below set out each part of the work in turn, so the full scope of an exterior clean is clear.
Water temperature makes far more difference to pressure washing than most people realise, and knowing when to reach for heat is part of doing the job well. Cold water at pressure shifts the bulk of everyday dirt, algae and moss from hard surfaces perfectly well, driving into the pores of paving, concrete, brick and stone and flushing out the grime that dulls them. But some contamination will not budge for cold water alone. Oil, grease, chewing gum and heavily set-in staining need heat to break them down, and hot water at pressure cuts through them where a cold jet would only push them around. Choosing between the two comes with experience, as does the control that separates a good wash from a damaging one. A jet set too high scars soft stone, strips sand from block-paving joints and marks concrete, so flow, pressure, temperature and nozzle are all matched to the surface at hand. On broad flat areas a rotary surface cleaner spreads the pressure evenly to avoid the striping a lance can leave. Around Alwalton, the surfaces most often washed are driveways, patios, paths, steps, yards and boundary walls, each carrying its own blend of grime and living growth. Beyond the transformation in appearance, there is a safety gain worth noting: the film of algae that coats shaded paving is what makes it slippery when wet, and washing it away restores dependable grip underfoot. Handled with the right temperature and the right pressure for each surface, a wash leaves hard surfaces looking close to new and considerably safer to use for months afterwards.
The clean is only half the story with a patio or driveway; how well the result lasts depends a great deal on what happens afterwards. Once a surface has been thoroughly cleaned, a protective sealant can be applied to lock in the finish, and it is a step that repays itself many times over. Sealing helps repel water, oil and stains, slows the return of moss and weeds, and makes each future clean quicker and easier, so the surface holds its refreshed appearance for far longer. Before any of that, though, comes the clean itself. Patio and driveway cleaning lifts ingrained dirt from the pores of block paving, natural stone, concrete and slabs rather than simply rinsing the top, and it usually begins by clearing the moss and weeds that colonise the joints. The settled grime is then drawn from the texture of the surface, restoring an original colour often long forgotten, while oil marks, tyre scuffs and rust spots are treated with products aimed at them directly. Block paving benefits from having fresh kiln-dried sand brushed back into the joints once it is clean and dry, re-locking the blocks and firming the surface before any seal is applied. For a home in Alwalton, a cleaned and sealed drive or patio not only transforms the look of the property from the roadside but stays looking that way through the seasons that follow. There is a safety benefit too, since shaded paving grows slippery once algae takes hold, and clearing it restores firm footing. The combination of a thorough clean, fresh jointing and a protective seal gives the longest-lasting result.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Investing in a professional, regular exterior cleaning programme in Alwalton helps protect your property’s external surfaces, maintain their appearance and extend their lifespan. Keeping your building clean and well maintained creates a professional first impression while preventing the build-up of dirt, algae, moss, staining and environmental grime.
A roof is one of the most expensive parts of a house to replace, which makes anything that extends its working life worth serious attention. Moss, lichen and algae shorten that life in ways that are easy to underestimate. As moss builds up it holds rainwater against the tiles and slates, works beneath their edges and keeps the covering damp, and over years that constant moisture accelerates wear and can lead to frost damage as trapped water freezes and expands. Roof cleaning slows all of that down. The heavier moss is removed first by hand or with gentle scraping, and a biocide is then applied to kill the spores that remain, holding regrowth at bay long after the visible growth has gone so the roof stays clear and dry rather than greening straight back over. The removal is done at low pressure and with care, since the fierce jets used on hard surfaces can crack tiles, dislodge them or drive water up beneath the laps. The growth is always heaviest on shaded, north-facing pitches that never fully dry out. Clearing it also protects the guttering below, which would otherwise choke on the debris a mossy roof sheds. Access is planned so the work is carried out safely at height. For a property in Alwalton, a cleaned and treated roof is not merely tidier to look at. It sheds water as designed, keeps the gutters flowing and holds its condition for years longer, pushing back the day when a costly replacement becomes unavoidable and protecting one of the most valuable elements of the whole building.
Cleaning solar panels safely is as much about how the work is reached as how it is done, and the safest approach keeps people firmly on the ground. Water-fed telescopic poles extend up to the array and carry soft brushes and a flow of purified water to the glass, so panels on a roof can be cleaned from below without anyone needing to climb onto the tiles among the very surfaces being cleaned. That matters both for safety and for the panels themselves, since working from the ground with soft brushes avoids the risk of scratching a delicate surface with harsher tools or heavier handling. The water carried up those poles is purified and deionised, which is what makes the method work. Stripped of its minerals, it lifts dust, pollen, moss spores and bird droppings from the glass and then dries perfectly clear, leaving none of the streaking or spotting that ordinary tap water leaves behind. Scouring pads, strong detergents and high pressure are all avoided, since each can damage the anti-reflective coating or disturb the seals around the cells. For homeowners in Alwalton, the payoff is straightforward. Solar panels only generate when light reaches the cells, and a clean array captures more of the available daylight, with the improvement usually showing plainly on the generation figures within days of the work. Keeping the glass clear protects the money invested in the system and helps it go on performing close to its rated output. Reaching the panels safely from the ground makes regular cleaning a simple, low-risk part of caring for a solar installation rather than a hazardous chore.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first exterior cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on roof tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
There is a real difference between a gutter that has been tidied and one that has genuinely been cleared, and the only way to know which you have is to look. Modern gutter cleaning uses a small camera fed along the run to inspect it properly, confirming that every length is clear from end to end rather than merely skimmed where it can be seen from the ground below. That inspection turns guesswork into certainty and catches the blockages that a quick clear from a ladder would miss entirely. The clearing itself is done with a gutter vacuum that draws leaves, moss, silt and debris out from ground level, keeping time on ladders to a minimum and reaching stretches that are awkward to get at by hand. The downpipes are checked as part of the same visit, since a blockage lower in the system will back water up along a gutter that looks perfectly clear above. The reason for all this care is straightforward: guttering carries rainwater off the roof and away from the walls and foundations, and once it blocks, that water spills over and runs down the face of the building, soaking into masonry and pooling at the base, bringing damp, staining and eventually structural harm. For a home in Alwalton, keeping the whole system clear and confirmed clear by camera is among the most cost-effective pieces of maintenance there is, a small outlay against the expense of curing penetrating damp once water has found a way in. A clear on a sensible schedule, especially around the autumn leaf fall, keeps water moving where it should through the wettest weeks of the year.
Not all render is the same, and cleaning it well means knowing what you are dealing with. Modern silicone and through-coloured systems such as monocouche and K-rend behave differently from older painted finishes or traditional pebbledash, and each responds to a slightly different mix and dwell time. Treating them all identically risks either leaving the surface still stained or, worse, damaging it, which is why an experienced eye counts for so much. What they share is a vulnerability to algae, lichen and the green and reddish staining that spreads across elevations facing the weather or sitting in shade, feeding on the moisture the porous surface holds. Whatever the type, the method is soft washing rather than force. High pressure has no place against render, where it tears the surface, opens cracks and drives water into the wall behind, causing damage far more costly than the clean would ever have been. Instead a specialist biocide is applied at low pressure and left to penetrate, killing the growth at its source so the finish stays clean for far longer than a surface merely rinsed. For a home in Alwalton, matching the treatment to the particular render is what clears the elevation fully while keeping it sound, and Pro Clean Xtreme approaches each finish on its own terms. The result is render returned to the crisp, even appearance it was chosen for, with the look of a whole wall transformed in a single visit and no risk to the surface beneath. Understanding the material, not just applying a standard process, is what makes the difference between a clean that lasts and one that disappoints.
As a family-run business established in 2016, we have built a reputation across Alwalton for delivering dependable, high-quality exterior cleaning services. We combine a personal, transparent approach to customer care with continuous investment in the industry’s best low-pressure steam equipment and safety systems. Whether handling a domestic roof clean or a large-scale commercial project, our team prioritises the long-term protection of your property, providing a reliable, fully insured service from start to finish.
We believe in complete transparency and professionalism from the moment you request a quote to the final site clean-up. Our structured, safety-first workflow is designed to keep you fully informed, protect your property and neighbouring assets, and deliver flawless results without any hidden surprises. Whether handling a domestic roof de-mossing or a major commercial pre-solar preparation project, our family-run team follows a meticulous process that guarantees a safe, efficient, and high-quality transformation.
We begin by using Google Earth to accurately measure your roof size, assess property access, and provide an initial quotation based on satellite data.
Once your booking is confirmed, we issue comprehensive public liability insurance documents, a client preparation checklist, and full RAMS (Risk Assessments and Method Statements).
On arrival, we introduce ourselves, notify neighbours regarding potential overspray, and protect your property by sheeting sensitive flower beds and gravel areas.
We clean your roof safely from our cherry picker platform using low-pressure telescopic steam poles, ensuring we never walk on your tiles.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Yes. We use the correct cleaning methods and equipment for each surface to achieve effective results while helping protect your property from unnecessary damage. Softer surfaces such as render and roofing require specialist cleaning techniques rather than aggressive methods
Yes, professional exterior cleaning can remove common problems such as moss, algae, lichen, dirt and weather staining from many outdoor surfaces, helping restore the appearance of your property.
Yes, we provide exterior cleaning solutions for both domestic and commercial properties, helping homeowners, landlords and businesses maintain clean, presentable buildings.
Yes, we clean patios, driveways, paths and other hard exterior surfaces to remove built-up dirt, grime, algae and staining, helping restore their original appearance.
Roof cleaning involves safely removing moss, algae and dirt using suitable equipment and treatments. The correct approach depends on the roof type and condition, ensuring the surface is cleaned effectively while minimising risk.
Professional exterior cleaners have the specialist equipment, experience and knowledge needed to clean different surfaces safely. This helps achieve better results while reducing the risk of surface damage.
Yes, exterior cleaning can dramatically improve the appearance of your home or business by removing dirt, staining and organic growth from visible outdoor areas.
The cost of exterior cleaning depends on factors such as the size of the property, surfaces being cleaned, level of staining and access requirements. Contact us for a free, no-obligation quote tailored to your property.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.