Services
Contact Us
Grime and growth add years to the look of a house, ageing it in the eye far faster than the building itself is ageing. A sound, well-built home can appear tired and run-down simply because its surfaces have gathered dirt, moss and algae over the seasons, and that visual ageing is entirely reversible. Exterior cleaning turns the clock back, and it works best when the whole outside of a building is treated together rather than one surface at a time. Pro Clean Xtreme takes that whole-property view of homes in Ditton Green, assessing each surface before deciding how to clean it. The benefit is more than cosmetic, though. Algae, moss and lichen hold moisture against masonry, render and roofing, and that lingering damp loosens pointing, feeds rot and slowly breaks materials down, so clearing the growth protects the fabric of the building as much as it improves how it looks. A clean, cared-for exterior also lifts the standing of a home, which counts whether it is lived in, sold or let. Because a house combines brick, render, timber, plastic, glass, paving and roofing, matching the method to each is what marks out a thorough clean, with pressure, solution and dwell time all adjusted to suit. For households in Ditton Green, a professionally cleaned exterior takes years off the look of a property and holds it in good condition through the seasons. The sections below set out each part of the work in turn, from the hard surfaces that suit pressure washing to the more delicate finishes that need a gentler touch, so the full scope of an exterior clean is clear from the outset.
Water temperature makes far more difference to a pressure wash than most people expect, and knowing when to bring in heat is part of doing the job properly. Cold water at pressure shifts the bulk of everyday dirt, algae and moss from hard surfaces perfectly well, driving into the pores of paving, concrete, brick and stone and flushing out the grime that dulls them. But some contamination will not yield to cold water alone. Oil, grease, chewing gum and heavily set-in staining need heat to break them down, and hot water at pressure cuts through them where a cold jet would only push them around. Choosing between the two comes with experience, as does the control that separates a good wash from a damaging one. A jet set too high scars soft stone, strips sand from block-paving joints and marks concrete, so flow, pressure, temperature and nozzle are all matched to the surface at hand, and on broad flat areas a rotary cleaner spreads the pressure evenly to avoid striping. Around Ditton Green, the surfaces most often washed are driveways, patios, paths, steps, yards and boundary walls, each carrying its own blend of grime and living growth. Beyond the transformation in appearance, there is a safety gain worth noting, since the film of algae that coats shaded paving is what makes it slippery when wet, and washing it away restores dependable grip underfoot. Handled with the right temperature and the right pressure for each surface, a wash leaves hard surfaces looking close to new and considerably safer to use for months afterwards, with even the most stubborn oil and grease broken down and lifted cleanly away in the process.
Few things spoil the look of a driveway like a spreading oil stain, and few marks are as stubborn to shift. Engine drips, leaking gearboxes and the general residue of parked vehicles soak into the pores of block paving, concrete and stone, and a general wash simply rinses over the top of them, leaving the dark patches largely untouched. Removing them properly is a specific task within a wider clean. Patio and driveway cleaning tackles oil stains, tyre marks and rust spots with targeted products that break down and lift contamination a plain jet leaves behind, rather than pretending a single pass will deal with everything. The broader clean, meanwhile, draws the ingrained dirt out of the surface and restores the original colour, and it usually begins by clearing the moss and weeds that colonise the joints between blocks and slabs. Where the surface is block paving, fresh kiln-dried sand is brushed back into the joints once it is clean and dry, re-locking the blocks, steadying the surface and slowing the return of moss and weeds. Leave that stage out and the paving loosens and deteriorates faster. For a home in Ditton Green, a driveway freed of its oil stains and ingrained grime lifts the whole appearance of the property from the roadside, often more than any other single job outside. There is a safety side to it too, as shaded paving turns slippery once algae takes hold, and clearing it restores firm footing. A protective seal applied afterwards helps resist future staining, so the next spill sits on the surface and is far easier to deal with before it can soak in and set into the paving.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Investing in a professional, regular exterior cleaning programme in Ditton Green helps protect your property’s external surfaces, maintain their appearance and extend their lifespan. Keeping your building clean and well maintained creates a professional first impression while preventing the build-up of dirt, algae, moss, staining and environmental grime.
There is a reason the northern side of a roof so often carries the heaviest moss while the sunnier pitches stay comparatively clear, and it comes down to shade and damp. Moss, lichen and algae thrive where surfaces stay wet, and the shaded, north-facing slopes that see the least sun dry out slowest after rain, giving the growth exactly the conditions it needs to spread. Left alone, it can blanket those pitches while the rest of the roof still looks reasonable. Roof cleaning brings the whole covering back to an even state. The heavier moss is lifted by hand or with gentle scraping, and a biocide is then applied to kill the spores that remain, so the roof stays clear long after the visible growth has gone rather than greening back over within a season. The work is done at low pressure and with care, because the fierce jets used on hard surfaces can crack tiles, unseat them or force water up beneath the laps. Wherever it grows, moss holds water against the covering, creeps under the tiles and sheds debris into the gutters below, so clearing it protects far more than appearance. Access is planned so the work is carried out safely at height. For a home in Ditton Green, treating the shaded pitches where growth takes hold first means a roof that sheds water as designed across its whole span, gutters that stay clear and a covering that holds its condition for years longer, rather than one slowly overtaken from its dampest, least visible side while the sunnier slopes still appear entirely sound.
A solar array that looks fine from the ground can quietly be losing a noticeable slice of its output every day, and over a year that lost generation adds up. Panels work by letting light reach the cells beneath the glass, and anything settling on that glass, dust, pollen, moss spores or bird droppings, cuts the amount that gets through and the electricity generated with it. Even a thin, even film makes a measurable difference, and the losses are rarely obvious until the panels are cleaned and the figures recover. Cleaning photovoltaic glass properly is a specific task rather than a general wash. Purified, deionised water is used because it dries clear, without the streaks and mineral spotting ordinary tap water leaves behind, so the glass is left genuinely clean. Soft brushes on water-fed telescopic poles reach the panels from the ground wherever the layout allows, keeping people safely off the roof and abrasive tools away from the delicate surface. Scouring pads, harsh detergents and high pressure are all avoided, since each can scratch the anti-reflective coating or disturb the seals around the cells. For homeowners in Ditton Green, the case is a practical one measured in output rather than appearance. A clean array captures more of the daylight that falls on it, and the improvement usually shows clearly on the generation readings within days. Keeping the panels clear protects the money invested in the system and shortens its payback, letting it go on producing close to its rated figure rather than slipping steadily behind through a build-up that is easily and cleanly prevented with regular attention right through the year.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first exterior cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on roof tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
Of all the maintenance a home needs, gutter cleaning offers about the best value for money there is. The job itself is quick and inexpensive, yet the problems it prevents, penetrating damp, saturated walls, rotten fascias and even structural harm, are among the most costly a homeowner can face. Set the modest price of a regular clear against the expense of putting any of those right, and the case makes itself. The stakes are so high because of what a blocked gutter does to the water it should carry. Guttering exists to take rainwater off the roof and away from the walls and foundations, and once leaves, moss and silt choke it, that water spills over the edge and runs down the face of the building, soaking into masonry and pooling at the base. Gutter cleaning keeps the system doing its job. A gutter vacuum draws the debris out from ground level, and a camera confirms each length is genuinely clear rather than skimmed only where it can be seen. The downpipes are checked as well, since a blockage lower down will back water up along a gutter that looks clear above. For a home in Ditton Green, keeping the whole system clear on a sensible schedule, particularly around the autumn leaf fall, keeps water moving where it should through the wettest weeks of the year. It is a small, regular outlay that quietly heads off a long list of far more expensive troubles, which is exactly what makes it one of the most sensible pieces of upkeep a property owner can arrange for their home.
The transformation a render clean brings is often the most dramatic of any exterior job, simply because render covers such a large, visible area and shows its dirt so plainly. A green, streaked, weathered elevation can be returned to a clean, even finish in a single visit, and the change lifts the appearance of the whole property in a way few other jobs match. That result, though, depends entirely on the right method. Render cannot take a high-pressure jet, which tears the surface, opens cracks and forces water into the wall behind, so the work is done by soft washing instead. A specialist biocide is applied at low pressure and left to penetrate, killing the algae, lichen and staining at their source rather than merely rinsing off what shows. Because the growth is destroyed rather than washed away, the finish stays clean for far longer afterwards. The treatment is matched to the render at hand, whether a modern silicone or through-coloured system such as monocouche or K-rend, or an older painted or pebbledash finish, each with its own ideal mix and dwell time. For a home in Ditton Green, Pro Clean Xtreme restores render to the crisp, uniform appearance it was chosen for, working methodically to leave the elevation bright and even. It is a change that undoes years of gradual weathering in one visit, and because it is achieved gently rather than by force, it comes with no risk to the surface beneath, framing the home the way it was designed to look from the day the render was applied.
As a family-run business established in 2016, we have built a reputation across Ditton Green for delivering dependable, high-quality exterior cleaning services. We combine a personal, transparent approach to customer care with continuous investment in the industry’s best low-pressure steam equipment and safety systems. Whether handling a domestic roof clean or a large-scale commercial project, our team prioritises the long-term protection of your property, providing a reliable, fully insured service from start to finish.
We believe in complete transparency and professionalism from the moment you request a quote to the final site clean-up. Our structured, safety-first workflow is designed to keep you fully informed, protect your property and neighbouring assets, and deliver flawless results without any hidden surprises. Whether handling a domestic roof de-mossing or a major commercial pre-solar preparation project, our family-run team follows a meticulous process that guarantees a safe, efficient, and high-quality transformation.
We begin by using Google Earth to accurately measure your roof size, assess property access, and provide an initial quotation based on satellite data.
Once your booking is confirmed, we issue comprehensive public liability insurance documents, a client preparation checklist, and full RAMS (Risk Assessments and Method Statements).
On arrival, we introduce ourselves, notify neighbours regarding potential overspray, and protect your property by sheeting sensitive flower beds and gravel areas.
We clean your roof safely from our cherry picker platform using low-pressure telescopic steam poles, ensuring we never walk on your tiles.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Yes. We use the correct cleaning methods and equipment for each surface to achieve effective results while helping protect your property from unnecessary damage. Softer surfaces such as render and roofing require specialist cleaning techniques rather than aggressive methods
Yes, professional exterior cleaning can remove common problems such as moss, algae, lichen, dirt and weather staining from many outdoor surfaces, helping restore the appearance of your property.
Yes, we provide exterior cleaning solutions for both domestic and commercial properties, helping homeowners, landlords and businesses maintain clean, presentable buildings.
Yes, we clean patios, driveways, paths and other hard exterior surfaces to remove built-up dirt, grime, algae and staining, helping restore their original appearance.
Roof cleaning involves safely removing moss, algae and dirt using suitable equipment and treatments. The correct approach depends on the roof type and condition, ensuring the surface is cleaned effectively while minimising risk.
Professional exterior cleaners have the specialist equipment, experience and knowledge needed to clean different surfaces safely. This helps achieve better results while reducing the risk of surface damage.
Yes, exterior cleaning can dramatically improve the appearance of your home or business by removing dirt, staining and organic growth from visible outdoor areas.
The cost of exterior cleaning depends on factors such as the size of the property, surfaces being cleaned, level of staining and access requirements. Contact us for a free, no-obligation quote tailored to your property.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.