Services
Contact Us
A home is more than the sum of its rooms; its outside is part of the street and setting it stands in. A clean, well-kept exterior contributes to the character of its surroundings, while a neglected one detracts from them, so caring for the outside is partly a matter of the wider place as well as the individual house. Exterior cleaning honours that, and it works best when the whole outside of a building is treated together rather than one surface at a time. Pro Clean Xtreme takes that whole-property view of homes in Eltisley, assessing each surface before deciding how to clean it. The value reaches beyond appearance, though. Algae, moss and lichen hold moisture against masonry, render and roofing, and that lingering damp loosens pointing, feeds rot and slowly breaks materials down, so clearing the growth protects the fabric of the building as much as it improves how it looks. A clean, cared-for exterior also lifts the standing of a home, which counts whether it is lived in, sold or let. Because a house combines brick, render, timber, plastic, glass, paving and roofing, matching the method to each is what marks out a thorough clean, with pressure, solution and dwell time all adjusted to suit. For households in Eltisley, a professionally cleaned exterior does right by the home and its surroundings alike and holds the property in good condition through the seasons. The sections below set out each part of the work in turn, from the hard surfaces that suit pressure washing to the more delicate finishes that need a gentler touch, so the full scope of an exterior clean is clear.
There is a widespread notion that pressure washing is simply about aiming a powerful jet at something dirty, but the real skill lies in controlling that power rather than unleashing it. A jet driven too hard will scar soft stone, blast the jointing sand out of block paving and etch tramlines into concrete, so the craft is in matching the force to the surface rather than overwhelming it, a judgement that only comes with experience. Set correctly, pressure washing is unmatched for clearing the ingrained dirt, algae and moss that dull hard surfaces, driving water into the pores of paving, brick, concrete and stone and flushing out grime no amount of scrubbing would shift. Flow, pressure and nozzle are all adjusted to the job in hand, and on wide, open areas a rotary surface cleaner spreads that force evenly to avoid the striping a bare lance can leave. Around Eltisley, the surfaces that most often call for it are driveways, patios, paths, steps, walls and yards, each carrying a different balance of dirt and living growth that shapes the approach. Where oil or heavy staining has set in, warm or hot water is brought in to break down contamination cold water alone will not lift. The gain is not only in how the surface looks afterwards, either. The thin film of algae that coats shaded paving is exactly what makes it slippery underfoot in the wet, and clearing it restores proper grip. A well-judged wash, controlled to suit each surface, leaves it both refreshed to the eye and considerably safer to use for months to come, which is the mark of the job done properly rather than merely at speed and without thought.
Block paving rewards care and punishes neglect, and the difference between the two often comes down to what happens in the joints. The interlocking design that gives block paving its strength also hands moss and weeds a network of gaps to colonise, and once those joints green over and the jointing sand washes out, the whole drive begins to look unkempt and starts to work loose underfoot. Patio and driveway cleaning restores block paving properly, and the difference goes well beyond a rinse. The clean begins by clearing the growth from between the blocks, since the joints are usually where the eye lands first. From there the ingrained dirt is drawn up out of the surface of each block, bringing back a colour owners have often forgotten the paving ever had. Any oil stains, tyre marks or rust spots a general wash leaves behind are treated with products aimed directly at them. Then comes the step that sets a proper job apart: with the paving clean and dry, fresh kiln-dried sand is brushed down into the joints, re-locking the blocks, steadying the surface as a whole and helping to hold weeds and moss at bay. Leave that stage out and the paving stays loose and deteriorates far faster. For a home in Eltisley, a revived driveway transforms the look of the property from the road, frequently more than any other single improvement outside. Paving grows slick once algae takes hold in the damp and shade, so clearing it away puts firm footing back underfoot, and a sealant applied afterwards locks in the finish and eases future upkeep considerably in the years that follow the initial clean.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Investing in a professional, regular exterior cleaning programme in Eltisley helps protect your property’s external surfaces, maintain their appearance and extend their lifespan. Keeping your building clean and well maintained creates a professional first impression while preventing the build-up of dirt, algae, moss, staining and environmental grime.
The reason a properly cleaned roof stays clean, rather than greening over again within a year, comes down to a single step that is easy to skip: the biocide treatment. Scraping the moss off tiles and slates clears what can be seen, but the microscopic spores left behind in the surface simply regrow, and without treating them the improvement is short-lived. A biocide applied across the covering after the heavier moss is removed kills those spores at the root, holding regrowth at bay for years and giving the work genuine, lasting value. The removal that comes first is done gently. The heavier moss is lifted by hand or with careful scraping, avoiding the fierce high pressure that can crack tiles, unseat them or drive water up beneath the laps into the roof space. Moss is more than an eyesore, holding water against the covering, creeping under the tiles and shedding debris into the gutters below, and it is always heaviest on the shaded, north-facing pitches that never fully dry. A soft, low-pressure method clears it all while leaving the roof intact, with access planned so the work is safe at height. For a home in Eltisley, a cleaned and treated roof sheds water as designed, keeps the guttering below clear of the debris a mossy roof sheds, and holds its condition for years longer. It is the biocide, working long after the visible cleaning is done, that turns a roof clean from a temporary tidy-up into a lasting improvement genuinely worth the effort of doing properly the first time round.
It is often cheaper, over the life of a system, to keep solar panels clean than to leave them dirty, once the lost generation is added up. Panels only earn their keep when light reaches the cells, and dust, pollen, moss spores and bird droppings all build up on the glass and cut the amount that gets through, so an array left uncleaned quietly produces less electricity month after month, and that shortfall has a real value. Cleaning photovoltaic glass properly recovers it. Purified, deionised water is used because it lifts contamination and then dries perfectly clear, leaving none of the streaking or spotting ordinary tap water leaves behind. Soft brushes on water-fed telescopic poles reach the panels from the ground wherever possible, keeping people safely off the roof and abrasive tools away from a delicate surface. Scouring pads, harsh detergents and high pressure are all avoided, since each can scratch the anti-reflective coating or disturb the seals around the cells. For homeowners in Eltisley, the benefit shows in the numbers. A clean array captures more of the daylight that falls on it, and the improvement usually appears plainly on the generation figures within days of the work. Set the modest cost of a regular clean against the value of the electricity a dirty array fails to produce, and keeping the glass clear makes plain financial sense, letting the system go on performing close to its rated output rather than losing ground to a build-up that is easily and cheaply prevented long before it can eat into the returns the panels were meant to deliver.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first exterior cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on roof tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
There is a real difference between a gutter that has merely been tidied and one that has genuinely been cleared, and the only way to be sure which you have is to look. Modern gutter cleaning uses a small camera fed along the run to inspect it properly, confirming that every length is clear from end to end rather than skimmed only where it can be seen from the ground. That inspection turns guesswork into certainty and catches the blockages a quick clear from a ladder would miss entirely. The clearing itself is done with a gutter vacuum that draws leaves, moss, silt and debris out from ground level, keeping time on ladders to a minimum and reaching stretches awkward to get at by hand. The downpipes are checked as part of the same visit, since a blockage lower in the system will back water up along a gutter that looks perfectly clear above. The reason for all this care is straightforward: guttering carries rainwater off the roof and away from the walls and foundations, and once it blocks, that water spills over and runs down the face of the building, soaking into masonry and pooling at the base, bringing damp, staining and eventual structural harm. For a home in Eltisley, keeping the whole system clear and confirmed clear by camera is among the most cost-effective pieces of maintenance there is, a small outlay against the expense of curing penetrating damp once water has found a way in. A clear on a sensible schedule, especially around the autumn leaf fall, keeps water moving where it should through the wettest weeks of the year dependably.
Render is more vulnerable to biological growth than many of the other surfaces on a house, and it is worth understanding why before cleaning it. Its faintly textured, porous surface holds moisture far more readily than smooth brick or glass, and that lingering damp is exactly what algae and lichen need, so render greens over faster and more visibly than the materials around it, particularly on elevations facing the weather or sitting in shade. Because of that vulnerability, render also demands a gentler method. High pressure has no place against it, tearing the surface, opening cracks and forcing water into the wall behind, causing damage far more costly than the clean would ever have been. Instead a specialist biocide is applied at low pressure and left to penetrate, killing the algae, lichen and staining at their source, and because the growth is destroyed rather than merely rinsed off, the finish stays clean for far longer. The treatment is matched to the render at hand, whether a modern silicone or through-coloured system such as monocouche or K-rend, or an older painted or pebbledash finish, each needing its own mix and dwell time. For a home in Eltisley, Pro Clean Xtreme cleans render with the care its porous, growth-prone surface requires, leaving the elevation bright and even with no risk to the surface beneath. Understanding why render stains so readily, and treating it accordingly, is what turns a wall that had greened over into one restored to the crisp finish it was chosen for, transformed in a single careful visit rather than harmed by a heavy-handed one.
As a family-run business established in 2016, we have built a reputation across Eltisley for delivering dependable, high-quality exterior cleaning services. We combine a personal, transparent approach to customer care with continuous investment in the industry’s best low-pressure steam equipment and safety systems. Whether handling a domestic roof clean or a large-scale commercial project, our team prioritises the long-term protection of your property, providing a reliable, fully insured service from start to finish.
We believe in complete transparency and professionalism from the moment you request a quote to the final site clean-up. Our structured, safety-first workflow is designed to keep you fully informed, protect your property and neighbouring assets, and deliver flawless results without any hidden surprises. Whether handling a domestic roof de-mossing or a major commercial pre-solar preparation project, our family-run team follows a meticulous process that guarantees a safe, efficient, and high-quality transformation.
We begin by using Google Earth to accurately measure your roof size, assess property access, and provide an initial quotation based on satellite data.
Once your booking is confirmed, we issue comprehensive public liability insurance documents, a client preparation checklist, and full RAMS (Risk Assessments and Method Statements).
On arrival, we introduce ourselves, notify neighbours regarding potential overspray, and protect your property by sheeting sensitive flower beds and gravel areas.
We clean your roof safely from our cherry picker platform using low-pressure telescopic steam poles, ensuring we never walk on your tiles.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Yes. We use the correct cleaning methods and equipment for each surface to achieve effective results while helping protect your property from unnecessary damage. Softer surfaces such as render and roofing require specialist cleaning techniques rather than aggressive methods
Yes, professional exterior cleaning can remove common problems such as moss, algae, lichen, dirt and weather staining from many outdoor surfaces, helping restore the appearance of your property.
Yes, we provide exterior cleaning solutions for both domestic and commercial properties, helping homeowners, landlords and businesses maintain clean, presentable buildings.
Yes, we clean patios, driveways, paths and other hard exterior surfaces to remove built-up dirt, grime, algae and staining, helping restore their original appearance.
Roof cleaning involves safely removing moss, algae and dirt using suitable equipment and treatments. The correct approach depends on the roof type and condition, ensuring the surface is cleaned effectively while minimising risk.
Professional exterior cleaners have the specialist equipment, experience and knowledge needed to clean different surfaces safely. This helps achieve better results while reducing the risk of surface damage.
Yes, exterior cleaning can dramatically improve the appearance of your home or business by removing dirt, staining and organic growth from visible outdoor areas.
The cost of exterior cleaning depends on factors such as the size of the property, surfaces being cleaned, level of staining and access requirements. Contact us for a free, no-obligation quote tailored to your property.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.