Services
Contact Us
Not every domestic array sits on a pitch. Flat-roofed garages, single-storey extensions and outbuildings increasingly carry modules on ballasted frames, tilted to a shallow angle and held down by weight rather than fixed through the covering. It is a sensible arrangement and it fouls differently from anything on a pitched elevation. The tilt is the first factor. Ballasted frames typically sit at ten to fifteen degrees rather than the thirty-five or forty of a pitched installation, so water crosses the glass slowly and deposits what it is carrying instead of running it clear. Dust that would wash off a steep panel simply stays. The second is drainage. Water leaving the bottom edge lands on a flat surface rather than continuing down a slope, and where that surface drains slowly the whole lower portion of each module stays damp for long periods. Algae establish there faster than on almost any other configuration. The third is debris. Flat surfaces collect leaves and windblown material that a pitched structure would shed, and once it accumulates against the frames it stays put. The practical consequence is a shorter interval. The method itself is unchanged: purified water, filtered and passed through deionising resin until it carries effectively no dissolved solids, applied at low pressure through a soft filament brush; bonded material wetted and given time to soften, the frame line cleared specifically, and a final rinse leaving the glass to dry clear without towelling. Access is usually straightforward, since a single-storey structure is comfortably within pole reach. Owners in Chippenham with ballasted arrays generally need solar panel cleaning more often than the pitched system on the house.
Ballasted arrays reward care in two directions: they are easy to reach and easy to disturb. The frames sit on weight rather than fixings, so the whole assembly relies on remaining where it was positioned. Nothing is leaned on, nothing is used as a handhold and nothing is nudged out of alignment while working — which sounds obvious and is exactly the sort of thing that gets forgotten when an array is at chest height rather than above head height. The temptation to step onto the surface is the other risk. Walking a flat structure to reach the far side of a run is convenient, and it is also a decision about somebody else’s building fabric that a cleaning contractor is not qualified to make. Where a run can be worked from ground level with a pole, it is. The rest of the standard applies as it would anywhere. Purified water produced through filtration and deionising resin, never taken from a tap. Soft filament brush heads with cushioned bumpers. Low pressure throughout, with nothing directed at frame seals, ballast trays or junction boxes. No weight on a module at any point, since the resulting microcracking is permanent and never becomes visible. Full coverage of every panel including the frame line and lower edges, which on a shallow-tilt array is where most of the problem sits. Public liability insurance and a risk assessment matched to the actual configuration behind every visit. Householders in Chippenham comparing solar panel cleaning services with a flat-mounted array should ask how the far side of the run will be reached.
Ballasted domestic arrays are usually cheaper to clean per module than pitched ones, and the reason is height rather than anything else. A single-storey structure is comfortably within pole reach from firm level standing, the operative can see what the brush head is doing, and there is no question of access equipment being required. Set against that, they need a shorter interval, so the annual cost is not always lower even where each visit is. Shallow tilt means water crosses the glass slowly and deposits what it carries, and the damp band along the lower edge holds growth more readily than a steeper panel would. The figure is built from module count, charged per panel with the rate improving as arrays grow. Travel, unloading, assembling poles and producing purified water are fixed costs incurred once regardless of how much glass follows them, so that portion spreads further across a larger system — which is also why a minimum charge applies and why a small run never costs proportionally little. Reach still adjusts it. A run set close to a boundary, hemmed in by planting or positioned where the vehicle cannot be brought within hose distance all add working time. Condition supplies the third input, since the packed band at the frame line comes away with dwell and repeated gentle passes rather than force. Pro Clean Xtreme assesses the property before quoting so all three are settled in advance and the figure holds on the day. Quotations are free, repeat bookings sit below one-off rates, and the price covers every module including frames and lower edges, purified water throughout and photographs afterwards.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular solar panel cleaning.
Professional solar panel cleaning in Chippenham offers a simple and effective way to maintain the cleanliness, appearance and performance of your solar panels. Over time, dirt, dust, bird droppings, pollen, leaves, algae and other environmental debris can accumulate across the surface of solar panels, leaving them looking dirty and potentially reducing the amount of sunlight reaching the panels. Regular solar panel cleaning helps remove this unwanted build-up, keeping the panels cleaner and allowing them to receive as much available sunlight as possible. Keeping solar panels clean can also support ongoing maintenance by making it easier to identify visible issues, damage or areas that may require further attention. Professionally cleaned solar panels can improve the overall appearance of your property while helping you get the most from your solar installation. Using suitable cleaning methods and equipment for solar panel surfaces is important to achieve effective results while reducing the risk of scratching, marking or damaging the panels. Whether your solar panels have accumulated bird mess, dust, dirt, pollen, algae or general environmental grime, professional solar panel cleaning in Chippenham can help keep them cleaner, clearer and better maintained throughout the year.
Ballasted arrays are the default on commercial flat structures, and everything that makes them demanding at domestic scale is multiplied there. Shallow tilt across several hundred modules means water crossing every panel slowly and depositing sediment at every lower rail. Parapets restrict airflow, so surfaces dry slowly. Plant, ductwork and elevated equipment shed material onto whichever rows sit beneath them. The result is usually the shortest cleaning interval of any configuration, and the generation data either side of the first visit generally establishes that within a year. Working them requires care about the ballast arrangement itself. The frames rely on weight distribution and are not intended to be disturbed, so nothing is leaned on, moved or used for support, and access equipment is positioned with regard to loading rather than convenience. Delivery is surveyed and documented in advance. Module count, mounting arrangement, structural condition and fragility, edge protection and the safest route to every row are established, producing a site-specific risk assessment and method statement agreed with the responsible person before dates are confirmed. Ground-level pole work is used where reach permits, with mobile elevating work platforms or rope access where it does not and operatives qualified for the method. Purified water is supplied from tanks brought to site and applied at low pressure through soft brushes, with the lower rail given dwell and worked specifically, and no chemicals entering drainage. Dated photographs and a written completion record follow every attendance. Operators around Chippenham with ballasted installations should expect commercial solar panel cleaning to be recommended more frequently than for a pitched array.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have developed a trusted reputation across Chippenham for reliable, professional solar panel cleaning. We combine years of experience with specialist cleaning equipment and careful working practices to provide a thorough service for residential and commercial solar installations. Our approach is straightforward and transparent, with every job completed with attention to detail and the condition of the panels in mind. From removing built-up dirt and bird deposits to clearing pollen, dust and other surface debris, we work carefully to leave solar panels clean and clear. Fully insured and committed to high standards of workmanship, we provide a dependable solar panel cleaning service from initial assessment through to completion.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our solar panel cleaning services. If you have a question about your solar panels, a specific cleaning requirement, or need further information about our service, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution for keeping your solar panels clean and well maintained.
The ideal frequency depends on your location, surroundings and how quickly dirt and debris build up. For many properties, an annual clean can help keep panels clear and well maintained.
Yes, keeping panels free from dirt, bird droppings, dust, pollen and other debris allows more sunlight to reach the surface. Cleaning can therefore help your panels operate as efficiently as possible.
Solar panels can collect bird droppings, dust, pollen, leaves, algae, grime and other environmental debris. These deposits can build up over time and affect the cleanliness of the panel surface.
Yes. Professional solar panel cleaning can be carried out on a wide range of domestic and commercial properties, subject to suitable access and safe working conditions.
Professional solar panel cleaning should be carried out using appropriate equipment and techniques designed for solar panel surfaces. Careful cleaning helps remove deposits without unnecessarily damaging or scratching the panels.
Rain can wash away some loose dirt, but it does not necessarily remove stubborn bird droppings, pollen, grime and other deposits. Regular professional cleaning can provide a more thorough clean than rainfall alone.
Yes, we provide professional solar panel cleaning in Chippenham, helping domestic and commercial customers keep their solar panels clean, clear and properly maintained.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.