Services
Contact Us
Installing something new on an existing paved area is increasingly common, and the condition of the surface underneath affects the result more than most people expect. Charging points are the frequent case. A wall unit needs a cable route and a standing position, and the bay used for charging takes concentrated use in one place from that point onwards. Where the paving is already losing jointing sand, repeated parking in the same position accelerates it. Bin stores and bike shelters are the other common addition. Both stand permanently on the surface, and both create exactly the conditions that produce heavy growth: shade, trapped moisture and an area nobody sweeps. Fitting one onto paving that is already green means sealing that condition in place for years. Ground anchors, posts and bolt fixings all penetrate the surface, and drilling into block paving without care can crack units or disturb the laying course. Cable and duct runs occasionally involve lifting blocks, and how carefully they are relaid determines whether that line remains invisible. Cleaning beforehand serves a practical purpose. It reveals the true condition, allows the installer to see what they are fixing to, and means the area beneath a new structure starts clean rather than being covered in whatever was there. Jointing around a new fixing is worth checking afterwards as well, since drilling and lifting displace sand well beyond the immediate point. Households in Melbourn planning an installation are usually best cleaning first and dealing with the wider area afterwards.
Working alongside installers takes a little coordination, and getting the sequence right saves paying for the same work twice. The order depends on what is being installed. Where a structure will stand permanently on the paving, cleaning beforehand makes sense, since the area beneath will be inaccessible afterwards. Where installation involves drilling, lifting or cable work, cleaning afterwards is better, because the work generates its own debris. On most jobs the answer is both in miniature: clean the area to be covered before the structure goes down, and restore the wider surface once everything is complete. A short conversation with the installer settles most of it. Whether blocks will be lifted, whether fixings penetrate the surface, whether a duct run crosses the drive and how much access their work needs. Where blocks are lifted and relaid, that section is worth photographing beforehand, since matching and levels are the things most likely to disappoint later. Jointing is checked afterwards, as any lifting or drilling displaces sand well beyond the immediate area. Where blocks have been lifted for a cable run, the reinstated section is checked for level and refilled properly rather than left as the installer found convenient. Condition is photographed before either job begins, which settles any later question about whether a crack or a mark predated the installation. Electrical connections and cable routes are identified as absolute boundaries for water direction, and treated areas are kept clear until genuinely dry. Pro Clean Xtreme is happy to work to another trade’s programme, and households in Melbourn planning an installation are welcome to ask about sequence before either job is booked.
Small preparatory cleans are quoted differently from full restorations, and the economics are worth understanding before deciding what to do. Cleaning a small defined area before an installation is a modest piece of work, but it carries the full fixed cost of a visit. Loading, travel, unloading, water connection, protection and pack-down take the same time whether the area is five square metres or fifty, so a small preparatory clean on its own is poor value per metre and will usually fall under the minimum charge. Combining it with the wider surface is far better value, and where the installation timing allows, that is the sensible route. Where it does not, because a structure is going down next week and the rest of the property can wait until spring, the minimum charge is stated at enquiry rather than mentioned once a date is being agreed. Condition on the small area is frequently graded heavy, since a corner earmarked for a bin store is usually the worst paving on a property. Jointing across the affected area is a full refill rather than a top-up. Condition is graded per area, and the corner earmarked for a structure frequently grades heavier than the driveway around it. Drainage clearing and kiln-dried re-sanding remain included in either case rather than appearing as extras. Everything is quoted as fixed written lines with both options shown, so anyone in Melbourn can compare doing it now alone against doing everything together later.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular driveway and patio cleaning.
Charging hubs and forecourt charging sites have hard surfaces that combine constant vehicle movement with people standing about on them for extended periods. The bays are the working area. Vehicles arrive, park precisely, sit for a period and depart, which produces a different wear pattern from ordinary parking: less turning, more concentrated standing, and drips accumulating in the same positions across every bay. Pedestrian use is the distinctive factor. Unlike a fuel forecourt, where people are present for minutes, drivers wait at a charging site, walk between bays and a building, and stand beside vehicles handling cables. Cable management across the surface adds a trip consideration in its own right. Cable and duct routes are frequently set into the paving, and the reinstatement lines around them are where jointing sand disappears first. Grip matters accordingly, and a documented cleaning programme supports the duty of care owed to users. Drainage clearing is included, since standing water in a bay where somebody is handling a cable is unwelcome for obvious reasons. Scheduling works around usage, generally overnight or in quiet periods, phased bay by bay so charging continues. Cable routes and any equipment at low level are identified as absolute boundaries for water direction before anything starts. Public liability cover, site-specific risk assessments and method statements are supplied before mobilisation, with completion records for the site file. Where bays are block laid, joints are cleared and refilled with fresh kiln-dried sand so nothing works loose along the reinstatement lines. For operators in Melbourn, a twice-yearly programme suits sites of this kind.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
Your driveway and patio are exposed to the elements throughout the year, making them particularly susceptible to dirt, organic growth and staining. Regular cleaning helps remove this buildup and keeps outdoor areas looking brighter and better maintained. We provide professional driveway and patio cleaning in Melbourn, using suitable cleaning methods for the surface being treated. Whether your paving has become slippery with algae, developed moss growth or simply looks tired and dirty, a thorough clean can make a noticeable difference.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
The ideal frequency depends on the surface, surrounding environment and amount of use. Regular cleaning can help prevent dirt, moss and algae from becoming heavily established.
Yes. Professional patio cleaning can remove moss, algae, dirt and other organic buildup from many types of paving.
Yes. Block paving can accumulate dirt, moss, algae and weeds over time, and professional cleaning can help restore its appearance.
Using excessive pressure or an unsuitable technique can potentially damage some surfaces. The correct cleaning method and pressure should be selected according to the paving material and its condition.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.