Services
Contact Us
There is a middle option between a full clean and doing nothing, and it suits more surfaces than most people realise. A treatment-only visit involves applying a biocidal product across the surface at proper dilution and leaving it to work, without any mechanical cleaning at all. The growth dies at root level over the following weeks, turns brown and gradually weathers away under ordinary rainfall and foot traffic across a period of months. It suits particular situations. Very soft or friable stone, where any cleaning would remove material from the face. Surfaces where a customer wants growth killed before deciding what to do next. Large areas where the budget for a full restoration is not available this year but the growth should not be left to establish further. Sites where noise, water use or access make machine work impractical. And ongoing maintenance between full cleans, where a light application every so often keeps recolonisation slow. The trade-offs are real and are stated plainly. There is no immediate transformation, and for several weeks a treated surface can look worse rather than better as the growth dies back. Silt in the joints is not removed, so weeds will eventually return. Jointing sand is not replaced. Ingrained staining and traffic film are untouched, since a biocide does nothing to either. It is a maintenance measure rather than a restoration, and describing it as anything else would be dishonest. It is also useful as a first stage where a full restoration is planned for a later date, since killing the growth now prevents it establishing further in the meantime. For surfaces in Witchford where full cleaning is unsuitable or unaffordable, treatment alone is a legitimate and useful alternative.
Offering more than one level of service means a customer can buy what their surface actually needs rather than a single standard package. A full restoration is the most common and covers everything: survey, preparation, hand weeding, biocidal treatment with dwell, an even rotary clean, hand detailing of edges and steps, rinsing, kiln-dried re-sanding on block paving and clearing of the gullies afterwards. A maintenance clean is the same sequence at a lighter intensity, appropriate where a surface was restored within the last few years. Treatment works quickly, one pass lifts the residue and re-sanding is a top-up. It takes a fraction of the time and is priced accordingly. Treatment only kills growth without mechanical cleaning, suiting delicate surfaces, constrained budgets and situations where machine work is impractical. Targeted work addresses specific areas rather than a whole property, which is useful where safety points to a path and steps while the driveway can wait. Sealing is a separate stage that follows a clean, quoted individually and recommended only where it will genuinely help. Drainage clearing sits inside the standard scope on every option involving machine work, since a clean that leaves gullies silted has simply moved the problem. Pro Clean Xtreme sets out which options suit a given surface, with the trade-offs of each explained honestly rather than steering towards the largest figure. Households in Witchford are frequently surprised to be offered something smaller than they rang about, which is usually a sign the assessment was done properly rather than a sales opportunity being missed.
Treatment-only work is priced quite differently from a full clean, and understanding the gap makes it easier to judge whether it represents value. The cost is substantially lower, typically a fraction of a full restoration on the same area. The reasons are straightforward. There is no machine work, so the labour is a fraction of a day rather than most of one. There is no kiln-dried sand and no re-sanding labour. There is no protection to set up beyond the planting adjacent to the treated area, no water supply to organise and no waste to manage. What remains is the product itself, applied at proper dilution across a measured area, and the time to apply it correctly. That said, the comparison is not like for like. A treatment-only visit does not clear the joints, does not replace jointing sand, does not clear drainage and does not touch ingrained staining or traffic film. A surface receiving treatment alone continues to deteriorate structurally even as its growth is killed. It works best either as a genuine maintenance measure between full cleans, extending the interval considerably, or as a holding measure where a restoration is planned for a later year. Where a surface genuinely needs the full sequence, that is said rather than a cheaper option being offered to secure a booking. Both are quoted as fixed written figures against a measured area, with the scope of each described in full so the difference between them is visible rather than assumed. Anyone in Witchford weighing the two should compare them across several years rather than on a single visit, since the cheaper option rarely stays cheaper indefinitely.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular driveway and patio cleaning.
Airfields, hangar aprons and light aviation premises have extensive concrete surfaces where cleanliness is an operational matter rather than a presentational one. Loose material is the primary concern. Any debris on an apron or a taxi area is a hazard to aircraft, and organic growth breaking up along joints and edges contributes directly to it. Moss establishing in expansion joints and along the margins of a concrete apron lifts and sheds material continuously. Contamination is heavily petrochemical. Fuel spotting, hydraulic residue and oil accumulate wherever aircraft and ground equipment stand, and hangar floors and their approaches collect the same. Hot systems and degreasing pre-treatment do that work, since biocidal treatment has no effect on it. Drainage clearing matters throughout, because standing water on a large flat apron freezes and creates both an operational and a safety problem across a wide area. Run-off is managed carefully, with interceptors protected and discharge directed to agreed points, since washings from these surfaces carry contamination that cannot be released freely. Access and scheduling are governed by the site. Operatives are inducted, movements are coordinated with operations, work is phased so aprons and access routes remain available, and everything is cleared promptly when required. Public liability cover, site-specific risk assessments and method statements are supplied before mobilisation, with completion records for the site file. Where paved pedestrian and parking areas are block laid, joints are cleared and refilled so nothing works loose or migrates onto an operational surface. For aviation premises in Witchford, an annual programme keeps surfaces clear of loose organic material and drainage working through winter.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
Your driveway and patio are exposed to the elements throughout the year, making them particularly susceptible to dirt, organic growth and staining. Regular cleaning helps remove this buildup and keeps outdoor areas looking brighter and better maintained. We provide professional driveway and patio cleaning in Witchford, using suitable cleaning methods for the surface being treated. Whether your paving has become slippery with algae, developed moss growth or simply looks tired and dirty, a thorough clean can make a noticeable difference.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
The ideal frequency depends on the surface, surrounding environment and amount of use. Regular cleaning can help prevent dirt, moss and algae from becoming heavily established.
Yes. Professional patio cleaning can remove moss, algae, dirt and other organic buildup from many types of paving.
Yes. Block paving can accumulate dirt, moss, algae and weeds over time, and professional cleaning can help restore its appearance.
Using excessive pressure or an unsuitable technique can potentially damage some surfaces. The correct cleaning method and pressure should be selected according to the paving material and its condition.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.