Services
Contact Us
Exterior cleaning is really an umbrella term for a whole set of related jobs, each dealing with a different surface of a home, and the value of bringing them together under one roof is that the property is cared for as a coherent whole. A clean drive beneath a mossy roof, or bright render below a blocked gutter, only tells half a story. Pro Clean Xtreme treats the outside of a home in Barton as a single connected job, assessing every surface before deciding how each should be handled. The reasons run deeper than appearance. Algae, moss and lichen hold moisture against masonry, render and roofing, and that persistent damp loosens pointing, feeds rot and slowly breaks materials down, so clearing the growth protects the fabric of the building as much as it improves how it looks. A clean, well-kept exterior also lifts the standing of a home, which counts whether it is lived in, sold or let. Because a house brings together brick, render, timber, plastic, glass, paving and roofing, each with its own texture and vulnerabilities, matching the method to the material is what separates a thorough clean from a rushed one, with pressure, solution and dwell time all adjusted to suit. For households in Barton, taking the whole exterior in hand at once produces a property that looks consistent and cared for and holds its condition through the seasons. The sections below break the work down surface by surface, from the hard areas that suit pressure washing to the delicate finishes that need soft washing, so the full scope of an exterior clean is clear.
There is a safety dimension to pressure washing that matters every bit as much as the way a surface looks afterwards. The thin, greenish film of algae that builds up on shaded paving is nearly invisible when dry and dangerously slick the moment it rains, and it lies behind a great many slips on paths, patios and driveways. Washing it away restores firm grip underfoot, a real benefit around entrances, steps and the routes used most, and particularly for older residents. The transformation in appearance is undeniable too. A high-pressure jet drives water into the pores of hard surfaces and flushes out the ingrained dirt, algae and moss that dull concrete, paving, brick and stone, achieving in minutes what scrubbing never could. The craft lies in control, not force: a jet set too high scars soft stone, strips sand from block-paving joints and marks concrete, so the pressure is matched carefully to each surface, and on broad flat areas a rotary cleaner spreads the force evenly to avoid striping. Around Barton, the surfaces most often washed are driveways, patios, paths, steps, yards and boundary walls, each holding its own mix of grime and biological growth. Where oil or heavy staining has set in, hot water is brought in to break down contamination cold water leaves untouched. The finished result is a surface that is both refreshed to look at and markedly safer to use, and it is that combination of appearance and safety that makes a well-judged pressure wash so worthwhile for a home. On heavily soiled areas a second pass is often worthwhile, lifting what the first has loosened and leaving the surface genuinely clean rather than merely improved.
Weeds and moss have a way of colonising the joints of a patio faster than anything else, and it is those green-filled gaps that give an otherwise sound surface its most neglected look. The joints between slabs and blocks gather windblown soil and hold moisture, all a seed or a spore needs to take root, and once the growth spreads it knits across the whole area. Patio and driveway cleaning gets to grips with this properly, clearing the joints out and lifting the ingrained dirt from the surface itself rather than merely rinsing over it. The work usually starts at those joints, because they are where a surface looks worst and where the problem begins. Once the moss and weeds are cleared, the clean draws the settled grime from the texture of the paving, restoring an original colour many owners have long since forgotten. Oil marks, tyre scuffs and rust spots that resist a general wash are tackled with products aimed specifically at them. For block paving, fresh kiln-dried sand is brushed into the joints once the surface is clean and dry, re-locking the blocks, firming the surface and slowing the return of the very growth just removed. For a home in Barton, a freshly cleaned drive or patio lifts the whole look of the property from the roadside, often more than any other job outside. It restores safe footing too, since shaded paving turns slippery as algae settles in. A protective seal can follow to hold the finish, fill the joints against fresh growth and make future upkeep easier.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Investing in a professional, regular exterior cleaning programme in Barton helps protect your property’s external surfaces, maintain their appearance and extend their lifespan. Keeping your building clean and well maintained creates a professional first impression while preventing the build-up of dirt, algae, moss, staining and environmental grime.
The single most important part of cleaning a roof is often the part that cannot be seen at all, and skipping it is why so many roofs green over again within a year. Scraping the moss off tiles and slates gives an immediate, satisfying result, but on its own it is short-lived, because the spores left behind in the surface simply regrow. This is why a proper roof clean does not end with the visible growth. Once the heavier moss has been eased away by hand or with careful scraping, a biocide is applied across the covering to kill the spores at the root, and it is this treatment that makes the result last, holding regrowth at bay for years rather than months. The removal itself is done gently and deliberately, without the fierce high pressure that can crack tiles, unseat them or drive water up beneath the laps into the roof space. Moss does more than mark the roofline, holding water against the covering, creeping under the tiles and shedding debris into the gutters below, and it is always heaviest on the shaded, north-facing pitches. A soft, low-pressure method clears it all while leaving the roof intact, with access planned so the work is safe at height. For a home in Barton, the reward is a roof that looks cared for, sheds water as designed, keeps the guttering below it clear and adds years to its working life, because the treatment beneath the surface goes on protecting it long after the visible cleaning is done. A thorough clear of the valleys and around the chimney forms part of the same visit, as these are the points where shed debris and trapped moisture tend to cause trouble first.
A solar array is a long-term investment that quietly loses value when it is left dirty, and bird droppings are among the worst offenders. Along with airborne dust, tree pollen and moss spores, they settle across the glass and cut the light reaching the cells beneath, and droppings in particular land in concentrated spots that can shade whole sections of a panel out of all proportion to their size, dragging output down more than their appearance suggests. Cleaning photovoltaic glass properly clears the lot. Purified, deionised water is used because it lifts contamination and then dries perfectly clear, leaving none of the mineral streaking that ordinary tap water deposits as it evaporates. Soft, water-fed brushes on telescopic poles let the panels be worked from the safety of the ground wherever the layout allows, keeping people off the roof and abrasive tools away from the fragile surface. Harsh pads, strong detergents and high pressure are all kept well away, as any of them can scratch the anti-reflective coating or work at the seals around each cell. For homeowners in Barton, the reward is easy to measure. Once the glass is clear, more daylight reaches the cells and the generation figures usually climb noticeably in the days that follow, often by a margin that surprises. Keeping an array clean is one of the simplest ways to protect its returns and to make sure the system goes on earning close to what it was fitted to deliver, rather than losing ground to a build-up of droppings and grime that is easily prevented. Ground-mounted arrays and panels on outbuildings are cleaned to the same standard, reached with the same poles and purified water rather than any harsher shortcut.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first exterior cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on roof tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
Much of the attention when clearing gutters falls on the long horizontal runs, but a system is only as good as its downpipes, and a blockage there can quietly undo an otherwise perfect clean. Water gathers where a downpipe leaves the gutter, and if leaves or silt have packed into the pipe, it backs up along the whole run and spills over the edge just as surely as a blocked gutter would. Thorough gutter cleaning treats the system as a whole, clearing the horizontal runs and checking the downpipes that carry the water safely to the ground. A gutter vacuum draws the debris out from ground level, and a camera confirms each length is genuinely clear rather than skimmed only at the visible ends. Working from the ground keeps time on ladders to a minimum and reaches stretches awkward by hand. The purpose behind it all is keeping rainwater moving off the roof and away from the walls and foundations, because once it overflows it runs down the face of the building, soaks into masonry and pools at the base, bringing damp, staining and eventually structural harm. For a home in Barton, keeping the whole system clear, downpipes included, is among the most cost-effective pieces of upkeep available, a small outlay set against the expense of curing penetrating damp once water has found its way in. Clearing everything on a sensible schedule, particularly around the autumn leaf fall, keeps water travelling where it should through the wettest weeks and prevents a chain of avoidable problems from ever getting started. Any debris drawn out is bagged and taken away rather than left on the ground, so the clean does not simply move the problem from the gutter to the garden below.
To understand why render needs such careful handling, it helps to look at the material itself. Render is porous by nature, its faintly textured surface designed to breathe, and that same porosity means it readily absorbs and holds moisture. Damp render is the ideal home for algae and lichen, which take root in the surface and spread as a wash of green, or the rusty orange of red algae, across the elevations that face the weather or sit in shade. A finish chosen for its clean, modern look gradually turns patchy and streaked, and a garden hose barely touches it. Render cleaning calls for a soft washing approach that respects the material. High pressure is actively harmful, tearing the porous surface, opening cracks and forcing water into the wall behind, causing damage far more costly than the clean would ever have been. Instead a specialist biocide is applied at low pressure and left to penetrate, killing the algae, lichen and staining at their source. Because the growth is destroyed rather than merely rinsed off, and because the treatment works into the porous surface where the growth roots, the finish stays clean for far longer. The treatment is matched to the render at hand, whether a modern silicone or through-coloured system such as monocouche or K-rend, or an older painted or pebbledash finish, each needing its own mix and dwell time. For a home in Barton, render is restored to the crisp, even finish it was chosen for, the work done with the nature of the material rather than against it, leaving the elevation bright and uniform with no risk to the surface beneath.
As a family-run business established in 2016, we have built a reputation across Barton for delivering dependable, high-quality exterior cleaning services. We combine a personal, transparent approach to customer care with continuous investment in the industry’s best low-pressure steam equipment and safety systems. Whether handling a domestic roof clean or a large-scale commercial project, our team prioritises the long-term protection of your property, providing a reliable, fully insured service from start to finish.
We believe in complete transparency and professionalism from the moment you request a quote to the final site clean-up. Our structured, safety-first workflow is designed to keep you fully informed, protect your property and neighbouring assets, and deliver flawless results without any hidden surprises. Whether handling a domestic roof de-mossing or a major commercial pre-solar preparation project, our family-run team follows a meticulous process that guarantees a safe, efficient, and high-quality transformation.
We begin by using Google Earth to accurately measure your roof size, assess property access, and provide an initial quotation based on satellite data.
Once your booking is confirmed, we issue comprehensive public liability insurance documents, a client preparation checklist, and full RAMS (Risk Assessments and Method Statements).
On arrival, we introduce ourselves, notify neighbours regarding potential overspray, and protect your property by sheeting sensitive flower beds and gravel areas.
We clean your roof safely from our cherry picker platform using low-pressure telescopic steam poles, ensuring we never walk on your tiles.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Yes. We use the correct cleaning methods and equipment for each surface to achieve effective results while helping protect your property from unnecessary damage. Softer surfaces such as render and roofing require specialist cleaning techniques rather than aggressive methods
Yes, professional exterior cleaning can remove common problems such as moss, algae, lichen, dirt and weather staining from many outdoor surfaces, helping restore the appearance of your property.
Yes, we provide exterior cleaning solutions for both domestic and commercial properties, helping homeowners, landlords and businesses maintain clean, presentable buildings.
Yes, we clean patios, driveways, paths and other hard exterior surfaces to remove built-up dirt, grime, algae and staining, helping restore their original appearance.
Roof cleaning involves safely removing moss, algae and dirt using suitable equipment and treatments. The correct approach depends on the roof type and condition, ensuring the surface is cleaned effectively while minimising risk.
Professional exterior cleaners have the specialist equipment, experience and knowledge needed to clean different surfaces safely. This helps achieve better results while reducing the risk of surface damage.
Yes, exterior cleaning can dramatically improve the appearance of your home or business by removing dirt, staining and organic growth from visible outdoor areas.
The cost of exterior cleaning depends on factors such as the size of the property, surfaces being cleaned, level of staining and access requirements. Contact us for a free, no-obligation quote tailored to your property.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.