Services
Contact Us
Damp is the one thing algae, moss and lichen need to flourish, and the outside of a house offers them plenty of it, from rain-soaked walls to shaded, slow-drying corners. Given the chance, that growth spreads across render, masonry, paving and roofing, and what begins as a faint green tinge becomes, over a few seasons, a property that looks tired and neglected. Exterior cleaning clears it away, and the best results come from treating the whole outside of a building together rather than one surface at a time. Pro Clean Xtreme takes that approach with homes in Barway, weighing up each surface before choosing how to clean it. The concern is not only how a home looks, though. That same biological growth holds moisture against the fabric of the building, and the lingering damp loosens pointing, feeds rot and slowly breaks materials down, so clearing it protects the structure as much as the appearance. A clean, cared-for exterior also lifts the standing of a home, which counts whether it is lived in, sold or let. Because a house combines brick, render, timber, plastic, glass, paving and roofing, matching the right method to each is what marks out a thorough clean, with pressure, solution and dwell time all adjusted to suit. For households in Barway, keeping the exterior clean keeps the growth in check and the property sound through the seasons. The sections below set out each part of the work in turn, from the hard surfaces that suit pressure washing to the more delicate finishes that need a gentler touch, so the full scope of an exterior clean is clear.
Water temperature makes far more difference to a pressure wash than most people expect, and knowing when to bring in heat is part of doing the job properly. Cold water at pressure shifts the bulk of everyday dirt, algae and moss from hard surfaces perfectly well, driving into the pores of paving, concrete, brick and stone and flushing out the grime that dulls them. But some contamination will not yield to cold water alone. Oil, grease, chewing gum and heavily set-in staining need heat to break them down, and hot water at pressure cuts through them where a cold jet would only push them around. Choosing between the two comes with experience, as does the control that separates a good wash from a damaging one. A jet set too high scars soft stone, strips sand from block-paving joints and marks concrete, so flow, pressure, temperature and nozzle are all matched to the surface at hand, and on broad flat areas a rotary cleaner spreads the pressure evenly to avoid striping. Around Barway, the surfaces most often washed are driveways, patios, paths, steps, yards and boundary walls, each carrying its own blend of grime and living growth. Beyond the transformation in appearance, there is a safety gain worth noting, since the film of algae that coats shaded paving is what makes it slippery when wet, and washing it away restores dependable grip underfoot. Handled with the right temperature and the right pressure for each surface, a wash leaves hard surfaces looking close to new and considerably safer to use for months afterwards.
Block paving rewards care and punishes neglect, and the difference between the two often comes down to what happens in the joints. The interlocking design that gives block paving its strength also hands moss and weeds a network of gaps to colonise, and once those joints green over and the jointing sand washes out, the whole drive begins to look unkempt and starts to work loose underfoot. Patio and driveway cleaning restores block paving properly, and the difference goes well beyond a rinse. The clean begins by clearing the growth from between the blocks, since the joints are usually where the eye lands first. From there the ingrained dirt is drawn up out of the surface of each block, bringing back a colour owners have often forgotten the paving ever had. Any oil stains, tyre marks or rust spots that a general wash leaves behind are treated with products aimed directly at them. Then comes the step that sets a proper job apart: with the paving clean and dry, fresh kiln-dried sand is brushed down into the joints, re-locking the blocks, steadying the surface as a whole and helping to hold weeds and moss at bay. Leave that stage out and the paving stays loose and deteriorates far faster. For a home in Barway, a revived driveway transforms the look of the property from the road, frequently more than any other single improvement outside. Paving grows slick once algae takes hold in the damp and shade, so clearing it away puts firm footing back underfoot, and a sealant applied afterwards locks in the finish and eases future upkeep.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Investing in a professional, regular exterior cleaning programme in Barway helps protect your property’s external surfaces, maintain their appearance and extend their lifespan. Keeping your building clean and well maintained creates a professional first impression while preventing the build-up of dirt, algae, moss, staining and environmental grime.
There is a reason the northern side of a roof so often carries the heaviest moss while the sunnier pitches stay comparatively clear, and it comes down to shade and damp. Moss, lichen and algae thrive where surfaces stay wet, and the shaded, north-facing slopes that see the least sun dry out slowest after rain, giving the growth exactly the conditions it needs to spread. Left alone, it can blanket those pitches while the rest of the roof still looks reasonable. Roof cleaning brings the whole covering back to an even state. The heavier moss is lifted by hand or with gentle scraping, and a biocide is then applied to kill the spores that remain, so the roof stays clear long after the visible growth has gone rather than greening back over within a season. The work is done at low pressure and with care, because the fierce jets used on hard surfaces can crack tiles, unseat them or force water up beneath the laps. Wherever it grows, moss holds water against the covering, creeps under the tiles and sheds debris into the gutters below, so clearing it protects far more than appearance. Access is planned so the work is carried out safely at height. For a home in Barway, treating the shaded pitches where growth takes hold first means a roof that sheds water as designed across its whole span, gutters that stay clear and a covering that holds its condition for years longer, rather than one slowly overtaken from its dampest, least visible side. Where a roof has been left untreated for many years, more than one application of biocide may be needed to bring the growth fully under control and keep it there.
There is a common belief that rain keeps solar panels clean, and it is one of the reasons so many arrays quietly underperform. Rain does rinse the loose dust from the glass, but it also dries in place, leaving a residue that concentrates around the edges of each panel and builds into a grimy border over time. Add pollen, moss spores and bird droppings, and the amount of light reaching the cells falls further than most owners would ever guess. Cleaning photovoltaic panels properly calls for more than a rinse from a hose. Purified, deionised water is used because it has the minerals stripped out, so it lifts away dirt and then dries perfectly clear, leaving none of the spotting or streaking that tap water deposits. Soft brushes fitted to water-fed telescopic poles reach the panels from the ground wherever the layout permits, keeping people off the roof and anything abrasive away from the delicate surface. Scouring pads, harsh detergents and high-pressure jets are all avoided, since each can scratch the anti-reflective coating or disturb the seals around the cells. For anyone in Barway who has fitted solar, the case for regular cleaning is a straightforward one. A clear panel captures more of the daylight that falls on it, and the improvement usually shows plainly in the generation figures within days of the work. Keeping the glass clean protects the money invested in the system and shortens the time it takes to pay back, letting the array go on performing close to its rated output rather than slowly slipping behind because rain alone was left to do a job it cannot do.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first exterior cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on roof tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
There is a real difference between a gutter that has merely been tidied and one that has genuinely been cleared, and the only way to be sure which you have is to look. Modern gutter cleaning uses a small camera fed along the run to inspect it properly, confirming that every length is clear from end to end rather than skimmed only where it can be seen from the ground. That inspection turns guesswork into certainty and catches the blockages a quick clear from a ladder would miss entirely. The clearing itself is done with a gutter vacuum that draws leaves, moss, silt and debris out from ground level, keeping time on ladders to a minimum and reaching stretches awkward to get at by hand. The downpipes are checked as part of the same visit, since a blockage lower in the system will back water up along a gutter that looks perfectly clear above. The reason for all this care is straightforward: guttering carries rainwater off the roof and away from the walls and foundations, and once it blocks, that water spills over and runs down the face of the building, soaking into masonry and pooling at the base, bringing damp, staining and eventual structural harm. For a home in Barway, keeping the whole system clear and confirmed clear by camera is among the most cost-effective pieces of maintenance there is, a small outlay against the expense of curing penetrating damp once water has found a way in. A clear on a sensible schedule, especially around the autumn leaf fall, keeps water moving where it should.
The transformation a render clean brings is often the most dramatic of any exterior job, simply because render covers such a large, visible area and shows its dirt so plainly. A green, streaked, weathered elevation can be returned to a clean, even finish in a single visit, and the change lifts the appearance of the whole property in a way few other jobs match. That result, though, depends entirely on the right method. Render cannot take a high-pressure jet, which tears the surface, opens cracks and forces water into the wall behind, so the work is done by soft washing instead. A specialist biocide is applied at low pressure and left to penetrate, killing the algae, lichen and staining at their source rather than merely rinsing off what shows. Because the growth is destroyed rather than washed away, the finish stays clean for far longer afterwards. The treatment is matched to the render at hand, whether a modern silicone or through-coloured system such as monocouche or K-rend, or an older painted or pebbledash finish, each with its own ideal mix and dwell time. For a home in Barway, Pro Clean Xtreme restores render to the crisp, uniform appearance it was chosen for, working methodically to leave the elevation bright and even. It is a change that undoes years of gradual weathering in one visit, and because it is achieved gently rather than by force, it comes with no risk to the surface beneath, framing the home the way it was designed to look. The treated growth continues to fade in the days after the visit, so a wall that already looks transformed often improves further still as the biocide finishes its work.
As a family-run business established in 2016, we have built a reputation across Barway for delivering dependable, high-quality exterior cleaning services. We combine a personal, transparent approach to customer care with continuous investment in the industry’s best low-pressure steam equipment and safety systems. Whether handling a domestic roof clean or a large-scale commercial project, our team prioritises the long-term protection of your property, providing a reliable, fully insured service from start to finish.
We believe in complete transparency and professionalism from the moment you request a quote to the final site clean-up. Our structured, safety-first workflow is designed to keep you fully informed, protect your property and neighbouring assets, and deliver flawless results without any hidden surprises. Whether handling a domestic roof de-mossing or a major commercial pre-solar preparation project, our family-run team follows a meticulous process that guarantees a safe, efficient, and high-quality transformation.
We begin by using Google Earth to accurately measure your roof size, assess property access, and provide an initial quotation based on satellite data.
Once your booking is confirmed, we issue comprehensive public liability insurance documents, a client preparation checklist, and full RAMS (Risk Assessments and Method Statements).
On arrival, we introduce ourselves, notify neighbours regarding potential overspray, and protect your property by sheeting sensitive flower beds and gravel areas.
We clean your roof safely from our cherry picker platform using low-pressure telescopic steam poles, ensuring we never walk on your tiles.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Yes. We use the correct cleaning methods and equipment for each surface to achieve effective results while helping protect your property from unnecessary damage. Softer surfaces such as render and roofing require specialist cleaning techniques rather than aggressive methods
Yes, professional exterior cleaning can remove common problems such as moss, algae, lichen, dirt and weather staining from many outdoor surfaces, helping restore the appearance of your property.
Yes, we provide exterior cleaning solutions for both domestic and commercial properties, helping homeowners, landlords and businesses maintain clean, presentable buildings.
Yes, we clean patios, driveways, paths and other hard exterior surfaces to remove built-up dirt, grime, algae and staining, helping restore their original appearance.
Roof cleaning involves safely removing moss, algae and dirt using suitable equipment and treatments. The correct approach depends on the roof type and condition, ensuring the surface is cleaned effectively while minimising risk.
Professional exterior cleaners have the specialist equipment, experience and knowledge needed to clean different surfaces safely. This helps achieve better results while reducing the risk of surface damage.
Yes, exterior cleaning can dramatically improve the appearance of your home or business by removing dirt, staining and organic growth from visible outdoor areas.
The cost of exterior cleaning depends on factors such as the size of the property, surfaces being cleaned, level of staining and access requirements. Contact us for a free, no-obligation quote tailored to your property.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.