Services
Contact Us
Dirt does not arrive on a building all at once; it accumulates so gradually that the decline goes unnoticed until it is well advanced. A little more algae each damp month, a little more grime each season, and a property that was smart a few years ago has slipped into looking tired without anyone quite noticing when. Exterior cleaning reverses that slow slide, and it works best when the whole outside of a building is treated together rather than one surface at a time. Pro Clean Xtreme takes that whole-property approach with homes in Boxworth, assessing each surface before deciding how to clean it. The concern runs deeper than appearance. Algae, moss and lichen hold moisture against masonry, render and roofing, and that lingering damp loosens pointing, feeds rot and slowly breaks materials down, so clearing the growth protects the fabric of the building as much as it improves how it looks. A clean, cared-for exterior also lifts the standing of a home, which counts whether it is lived in, sold or let. Because a house combines brick, render, timber, plastic, glass, paving and roofing, matching the method to each is what marks out a thorough clean, with pressure, solution and dwell time all adjusted to suit. For households in Boxworth, keeping the exterior clean catches that gradual accumulation before it becomes established, keeping the property sound through the seasons. The sections below set out each part of the work in turn, so the full scope of an exterior clean is clear from the start. Catching that build-up early, before it has embedded itself, also makes each clean quicker and gentler than tackling years of accumulated neglect all at once.
The tool that transforms a large area of paving is not the lance most people picture but the flat, disc-shaped rotary surface cleaner that runs across it. Where a bare lance concentrates its force in a single point and can leave stripes as it moves, a rotary cleaner spins two or more jets beneath a shrouded head, spreading the pressure evenly across the surface and lifting dirt in a uniform sweep. It is what makes the difference between a patchy, streaked finish and a consistently clean one across a driveway or patio. Behind that even finish lies the principle that governs all pressure washing: control. A jet set too high scars soft stone, strips the sand from block-paving joints and marks concrete, so flow, pressure and nozzle are matched carefully to each surface, and the rotary head is chosen where broad, flat areas need an even result. Where oil or heavy staining has set in, hot water is introduced to break down contamination cold water cannot shift. Around Boxworth, the surfaces most often washed are driveways, patios, paths, steps, yards and boundary walls, each carrying its own blend of grime and living growth. The benefit is not only cosmetic, since the film of algae that coats shaded paving is what makes it slippery when wet, and washing it away restores dependable grip underfoot. With the right equipment and the right control for each surface, pressure washing leaves hard surfaces looking close to new and considerably safer to use, and the even finish a rotary cleaner delivers is what makes a large area look properly, uniformly clean rather than patched together in streaks.
Few things spoil the look of a driveway like a spreading oil stain, and few marks are as stubborn to shift. Engine drips, leaking gearboxes and the general residue of parked vehicles soak into the pores of block paving, concrete and stone, and a general wash simply rinses over the top of them, leaving the dark patches largely untouched. Removing them properly is a specific task within a wider clean. Patio and driveway cleaning tackles oil stains, tyre marks and rust spots with targeted products that break down and lift contamination a plain jet leaves behind, rather than pretending a single pass will deal with everything. The broader clean, meanwhile, draws the ingrained dirt out of the surface and restores the original colour, and it usually begins by clearing the moss and weeds that colonise the joints between blocks and slabs. Where the surface is block paving, fresh kiln-dried sand is brushed back into the joints once it is clean and dry, re-locking the blocks, steadying the surface and slowing the return of moss and weeds. Leave that stage out and the paving loosens and deteriorates faster. For a home in Boxworth, a driveway freed of its oil stains and ingrained grime lifts the whole appearance of the property from the roadside, often more than any other single job outside. There is a safety side to it too, as shaded paving turns slippery once algae takes hold, and clearing it restores firm footing. A protective seal applied afterwards helps resist future staining, so the next spill is far easier to deal with before it can set.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Investing in a professional, regular exterior cleaning programme in Boxworth helps protect your property’s external surfaces, maintain their appearance and extend their lifespan. Keeping your building clean and well maintained creates a professional first impression while preventing the build-up of dirt, algae, moss, staining and environmental grime.
There is a right way and a badly wrong way to clean a roof, and the difference almost always comes down to pressure. It is tempting to treat a mossy roof like a dirty driveway and simply blast it clean, but a high-pressure jet aimed at tiles and slates can crack them, lift them off their fixings and drive water up under the laps, turning a cosmetic job into a leak. Proper roof cleaning takes the opposite approach. The heavier moss is removed first by hand or with gentle scraping, and only then is a biocide applied to deal with what remains. That treatment matters most in the long run, because it kills the spores at the root and slows their return, so the roof stays clear long after the visible growth has gone rather than greening over again within a season. Moss is more than an eyesore, holding rainwater against the covering, working beneath the edges of the tiles and washing down into the gutters, where it collects and blocks the flow. The build-up is always worst on the shaded, north-facing pitches that never fully dry out. A soft, low-pressure method clears all of this while leaving the covering intact, and access is planned so the work is carried out safely at height. For a home in Boxworth, the payoff is a roof that not only looks cared for but sheds water as intended, keeps the guttering below it clear and holds its condition for years longer than a neglected one ever would, because it has been cleaned gently rather than damaged in the cleaning.
Cleaning solar panels is one of those jobs where the wrong method does more harm than no cleaning at all, and knowing what to avoid is central to getting it right. The glass over the cells carries a delicate anti-reflective coating, and the seals around each panel are not designed to take rough treatment, so scouring pads, stiff brushes, strong detergents and high-pressure jets are all off the table. Any of them can scratch the coating or work at the seals, and the damage is permanent. The correct approach is deliberately gentle. Purified, deionised water is applied with soft brushes on water-fed telescopic poles, lifting dust, pollen, moss spores and bird droppings from the glass and then drying perfectly clear, leaving none of the streaking or spotting ordinary tap water leaves behind. Working from the ground with soft brushes keeps people safely off the roof and anything abrasive away from the surface. The point of all this care is output, since panels only generate when light reaches the cells, and anything on the glass cuts the amount that gets through. For homeowners in Boxworth, a properly cleaned array captures more of the available daylight, and the improvement usually shows plainly on the generation figures within days of the work. Cleaning the panels gently protects both the glass and the returns, keeping the system performing close to its rated output without the risk a careless, abrasive approach would bring. It is precise, patient work, and doing it the right way is what makes regular cleaning a benefit rather than a hazard to a valuable installation.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first exterior cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on roof tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
The trouble with a blocked gutter is that the damage it causes shows up somewhere else entirely, and often long after the blockage first formed. Leaves, moss and silt gather in the run until water can no longer pass, and from there it spills over the edge and down the wall below, soaking into masonry and render and pooling around the foundations. What arrives as damp patches inside a room, or as green staining spreading up an external wall, frequently traces back to a gutter that has been quietly overflowing for months. Gutter cleaning removes the cause before the damp can take hold. A gutter vacuum draws the debris out from ground level, and a camera confirms each length is genuinely clear rather than skimmed only where it can be seen. Working from the ground keeps time on ladders to a minimum and reaches stretches awkward by hand, and the downpipes are checked as well, since a blockage lower down will back water up along a gutter that looks perfectly clear above. For a home in Boxworth, keeping the gutters flowing protects everything below them, from the walls and their pointing to the foundations at the base. It is among the most cost-effective pieces of maintenance a homeowner can arrange, a small outlay set against the considerable expense of curing penetrating damp once water has found its way inside. Clearing the system on a sensible schedule, particularly around the autumn leaf fall, keeps water moving where it should and prevents a chain of avoidable and expensive problems from ever getting started.
Render is a porous material, and that single fact explains most of what goes wrong with it over time. Its faintly textured surface soaks up and holds moisture, and damp render is the perfect home for algae, lichen and the green or reddish staining that creeps across elevations facing the weather or sitting in shade. A finish chosen for its clean, modern look gradually turns patchy and dirty, and rinsing it with a hose achieves next to nothing. Render cleaning calls for a soft washing approach rather than force. High pressure is actively harmful here, capable of blasting the surface, opening cracks and forcing water into the wall behind, leaving damage far more costly than the cleaning would ever have been. Instead a specialist biocide is applied at low pressure and given time to penetrate, killing the algae and lichen at their source. Because it destroys the growth rather than merely rinsing off what is visible, the elevation stays clean for far longer afterwards. The treatment is matched to the render in question, whether a modern silicone or through-coloured system such as monocouche or K-rend, or an older painted or pebbledash finish, each with its own ideal mix and dwell time. Getting that right is what clears the surface fully while keeping it sound. For a home in Boxworth, professionally cleaned render regains the crisp, even appearance it was meant to have, transforming the look of a whole elevation in a single visit. Handled with the care the material demands, the finish is left bright and uniform with no risk to the surface beneath.
As a family-run business established in 2016, we have built a reputation across Boxworth for delivering dependable, high-quality exterior cleaning services. We combine a personal, transparent approach to customer care with continuous investment in the industry’s best low-pressure steam equipment and safety systems. Whether handling a domestic roof clean or a large-scale commercial project, our team prioritises the long-term protection of your property, providing a reliable, fully insured service from start to finish.
We believe in complete transparency and professionalism from the moment you request a quote to the final site clean-up. Our structured, safety-first workflow is designed to keep you fully informed, protect your property and neighbouring assets, and deliver flawless results without any hidden surprises. Whether handling a domestic roof de-mossing or a major commercial pre-solar preparation project, our family-run team follows a meticulous process that guarantees a safe, efficient, and high-quality transformation.
We begin by using Google Earth to accurately measure your roof size, assess property access, and provide an initial quotation based on satellite data.
Once your booking is confirmed, we issue comprehensive public liability insurance documents, a client preparation checklist, and full RAMS (Risk Assessments and Method Statements).
On arrival, we introduce ourselves, notify neighbours regarding potential overspray, and protect your property by sheeting sensitive flower beds and gravel areas.
We clean your roof safely from our cherry picker platform using low-pressure telescopic steam poles, ensuring we never walk on your tiles.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Yes. We use the correct cleaning methods and equipment for each surface to achieve effective results while helping protect your property from unnecessary damage. Softer surfaces such as render and roofing require specialist cleaning techniques rather than aggressive methods
Yes, professional exterior cleaning can remove common problems such as moss, algae, lichen, dirt and weather staining from many outdoor surfaces, helping restore the appearance of your property.
Yes, we provide exterior cleaning solutions for both domestic and commercial properties, helping homeowners, landlords and businesses maintain clean, presentable buildings.
Yes, we clean patios, driveways, paths and other hard exterior surfaces to remove built-up dirt, grime, algae and staining, helping restore their original appearance.
Roof cleaning involves safely removing moss, algae and dirt using suitable equipment and treatments. The correct approach depends on the roof type and condition, ensuring the surface is cleaned effectively while minimising risk.
Professional exterior cleaners have the specialist equipment, experience and knowledge needed to clean different surfaces safely. This helps achieve better results while reducing the risk of surface damage.
Yes, exterior cleaning can dramatically improve the appearance of your home or business by removing dirt, staining and organic growth from visible outdoor areas.
The cost of exterior cleaning depends on factors such as the size of the property, surfaces being cleaned, level of staining and access requirements. Contact us for a free, no-obligation quote tailored to your property.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.