Services
Contact Us
Getting the outside of a house properly clean is less about power than about matching the right method to each different surface, and that is the real craft behind exterior cleaning. A typical home brings together brick, render, timber, uPVC, glass, paved areas and roofing, each with its own texture, its own vulnerabilities and its own ideal approach, and treating them all the same is how damage happens. Reading each surface correctly and choosing a method that cleans it without harm is what separates a careful job from a careless one. Pro Clean Xtreme works this way across properties in Brington, assessing the whole outside of a building before settling on how each part should be handled. Beyond appearance, there is preservation at stake. Algae, moss and lichen hold moisture against masonry, render and roofing, and that lingering damp loosens pointing, feeds rot and slowly breaks materials down, so clearing the growth protects the fabric of a home as much as it improves the look of it. A clean, cared-for exterior also lifts the standing of a property, which counts whether it is lived in, sold or let. Getting the method right means adjusting pressure, cleaning solution and dwell time to suit whatever surface is in front of them. For households in Brington, that considered, surface-by-surface approach delivers a home that looks its best and holds its condition through the seasons. The sections that follow take each element of the work in turn, from the hard surfaces that suit pressure washing to the more delicate finishes that need a gentler touch, so the full scope of an exterior clean is clear.
There is a particular satisfaction in watching a pressure washer reveal a clean strip across a filthy surface, the sharp line between treated and untreated showing at a glance just how much grime had built up unnoticed. That reveal is what makes pressure washing so rewarding, and it is proof of how effectively a controlled high-pressure jet lifts dirt, algae and moss from hard surfaces, driving water into the pores of paving, concrete, brick and stone and flushing out years of accumulation in a single pass. The power behind that transformation has to be controlled to be safe. A jet set too high scars soft stone, strips the sand from block-paving joints and marks concrete, so flow, pressure and nozzle are matched carefully to each surface, and on broad flat areas a rotary cleaner spreads the force to avoid the striping a bare lance can leave. Where oil or heavy staining has set in, hot water is introduced to break down contamination cold water cannot shift. Around Brington, the surfaces most often washed are driveways, patios, paths, steps, yards and boundary walls, each carrying its own blend of grime and biological growth. Beyond the visible transformation, there is a safety gain worth noting, since the film of algae that coats shaded paving is exactly what makes it slippery when wet, and washing it away restores dependable grip underfoot. Handled with proper control, a pressure wash leaves hard surfaces looking close to new and considerably safer to use, and the clean line where the grime ends is a reminder of just how much a good wash actually removes.
A patio that has grown slippery is more than an inconvenience; it is a genuine hazard, and restoring safe footing is one of the quieter benefits of a proper clean. Algae builds up in the damp, shaded corners of a patio or path where the surface is slowest to dry, and while it is barely visible when the ground is dry, it turns treacherous the moment it rains. Patio and driveway cleaning removes that risk along with the grime. The work draws the ingrained dirt and biological growth out of the paving rather than merely rinsing the top, and it usually begins by clearing the moss and weeds that colonise the joints between slabs and blocks. From there the settled grime is lifted from the texture of the surface, restoring an original colour often hidden for years, while oil marks, tyre scuffs and rust spots are treated with products aimed at them directly. Where the surface is block paving, fresh kiln-dried sand is swept into the joints once the paving is clean and dry, re-locking the blocks and firming the surface. For a home in Brington, a freshly cleaned patio or drive lifts the appearance of the whole property and, just as importantly, makes it safe to cross again in wet weather, restoring confident footing where a slippery surface had made people wary. A protective seal can be applied afterwards to hold the finish, resist staining and make the next clean considerably easier when the time comes around. Left untreated, a slippery patio only grows more hazardous through the wetter months, which is why clearing the algae before winter is well worth doing rather than putting off.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Investing in a professional, regular exterior cleaning programme in Brington helps protect your property’s external surfaces, maintain their appearance and extend their lifespan. Keeping your building clean and well maintained creates a professional first impression while preventing the build-up of dirt, algae, moss, staining and environmental grime.
A roof is one of the most expensive parts of a house to replace, which makes anything that extends its working life worth serious attention. Moss, lichen and algae shorten that life in ways easy to underestimate. As moss builds up it holds rainwater against the tiles and slates, works beneath their edges and keeps the covering damp, and over years that constant moisture accelerates wear and can lead to frost damage as trapped water freezes and expands. Roof cleaning slows all of that down. The heavier moss is removed first by hand or with gentle scraping, and a biocide is then applied to kill the spores that remain, holding regrowth at bay long after the visible growth has gone so the roof stays clear and dry rather than greening straight back over. The removal is done at low pressure and with care, since the fierce jets used on hard surfaces can crack tiles, dislodge them or drive water up beneath the laps. The growth is always heaviest on shaded, north-facing pitches that never fully dry out. Clearing it also protects the guttering below, which would otherwise choke on the debris a mossy roof sheds. Access is planned so the work is carried out safely at height. For a home in Brington, a cleaned and treated roof is not merely tidier to look at. It sheds water as designed, keeps the gutters flowing and holds its condition for years longer, pushing back the day when a costly replacement becomes unavoidable and protecting one of the most valuable elements of the whole building.
It seems counterintuitive that the purest water makes the best cleaner, but with solar panels that is exactly the case. Ordinary tap water carries dissolved minerals, and as it dries on glass those minerals are left behind as spots and a cloudy film, so a panel washed and left to air-dry with tap water can end up looking little better than before. Deionised water has had those minerals removed, so it lifts contamination from the glass and then evaporates perfectly clear, leaving a genuinely clean surface with no residue at all. That matters because solar panels only generate when light reaches the cells beneath the glass, and dust, pollen, moss spores and bird droppings all cut the amount that gets through. The deionised water is applied with soft brushes on water-fed telescopic poles, reaching the panels from the ground wherever possible, keeping people safely off the roof and abrasive tools away from a delicate surface. Scouring pads, harsh detergents and high pressure are all avoided, since each can scratch the anti-reflective coating or disturb the seals around the cells. For homeowners in Brington, the benefit is measurable. A clean array captures more of the daylight that falls on it, and the improvement usually shows plainly on the generation figures within days of the work. Using purified water rather than the tap is what leaves the glass truly clear rather than merely rinsed, protecting the money invested in the system and helping it perform close to its rated output, so the whole array earns what it was fitted to deliver. A gentle rinse from the same purified supply finishes the job, so nothing is left on the glass to attract fresh dirt or dry into a film.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first exterior cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on roof tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
When it comes to clearing gutters, timing counts for as much as thoroughness. A system that has carried water without complaint all summer can be overwhelmed within a few weeks once the trees begin to shed, as falling leaves pile into the runs and settle into a wet, compacted mass that stops the flow. The most sensible schedule therefore clears the gutters as the leaves come down and again once they have finished, catching the problem when it is at its worst. The clearing itself is done thoroughly. A gutter vacuum draws leaves, moss, silt and debris out from ground level, and a camera confirms each length is genuinely clear rather than skimmed only where it can be seen. Working from the ground keeps time on ladders to a minimum and reaches stretches awkward by hand, and the downpipes are checked as well, since a blockage lower down will back water up along a gutter that looks clear above. The point of it all is what a blocked gutter does to the water it should carry, spilling it over the edge and down the wall, where it soaks into masonry, breaks down pointing and brings damp and eventual structural harm. For a home in Brington, clearing the gutters ahead of the wettest weeks, particularly around the autumn leaf fall, keeps water moving safely off the roof when the system is under most strain. It is a small, well-timed piece of upkeep that heads off a long list of far more expensive problems before any of them can begin. Where trees overhang a property closely, a more frequent check through the year is often the sensible course, since such gutters fill faster than most.
Anyone who has cleaned a render wall only to see it green over again within the year has met the central challenge of the job: the growth comes back. The reason is that a simple wash removes only the algae and lichen on the surface, leaving the spores rooted in the render itself, and from there they regrow, so the elevation returns to its stained state before long. Render cleaning done properly solves this by killing the growth at its source. A specialist biocide is applied at low pressure and left to penetrate the surface, destroying the algae, lichen and staining at the root rather than merely rinsing off what shows, and that is why a soft-washed render stays clean for far longer. The low-pressure method is essential, because render cannot take a high-pressure jet, which tears the surface, opens cracks and forces water into the wall behind, causing damage far more costly than the cleaning would ever have saved. The porous, textured nature of render is what holds the moisture and gives the growth its foothold, so the staining spreads first across elevations facing the weather or sitting in shade. The treatment is matched to the render at hand, whether a modern silicone or through-coloured system such as monocouche or K-rend, or an older painted or pebbledash finish. For a home in Brington, Pro Clean Xtreme cleans render in a way that lasts, killing the growth rather than merely moving it, and leaving the elevation bright and even with no risk to the surface beneath. Cleaning at the source is the whole difference between a wall that stays clean and one that greens straight back over.
As a family-run business established in 2016, we have built a reputation across Brington for delivering dependable, high-quality exterior cleaning services. We combine a personal, transparent approach to customer care with continuous investment in the industry’s best low-pressure steam equipment and safety systems. Whether handling a domestic roof clean or a large-scale commercial project, our team prioritises the long-term protection of your property, providing a reliable, fully insured service from start to finish.
We believe in complete transparency and professionalism from the moment you request a quote to the final site clean-up. Our structured, safety-first workflow is designed to keep you fully informed, protect your property and neighbouring assets, and deliver flawless results without any hidden surprises. Whether handling a domestic roof de-mossing or a major commercial pre-solar preparation project, our family-run team follows a meticulous process that guarantees a safe, efficient, and high-quality transformation.
We begin by using Google Earth to accurately measure your roof size, assess property access, and provide an initial quotation based on satellite data.
Once your booking is confirmed, we issue comprehensive public liability insurance documents, a client preparation checklist, and full RAMS (Risk Assessments and Method Statements).
On arrival, we introduce ourselves, notify neighbours regarding potential overspray, and protect your property by sheeting sensitive flower beds and gravel areas.
We clean your roof safely from our cherry picker platform using low-pressure telescopic steam poles, ensuring we never walk on your tiles.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Yes. We use the correct cleaning methods and equipment for each surface to achieve effective results while helping protect your property from unnecessary damage. Softer surfaces such as render and roofing require specialist cleaning techniques rather than aggressive methods
Yes, professional exterior cleaning can remove common problems such as moss, algae, lichen, dirt and weather staining from many outdoor surfaces, helping restore the appearance of your property.
Yes, we provide exterior cleaning solutions for both domestic and commercial properties, helping homeowners, landlords and businesses maintain clean, presentable buildings.
Yes, we clean patios, driveways, paths and other hard exterior surfaces to remove built-up dirt, grime, algae and staining, helping restore their original appearance.
Roof cleaning involves safely removing moss, algae and dirt using suitable equipment and treatments. The correct approach depends on the roof type and condition, ensuring the surface is cleaned effectively while minimising risk.
Professional exterior cleaners have the specialist equipment, experience and knowledge needed to clean different surfaces safely. This helps achieve better results while reducing the risk of surface damage.
Yes, exterior cleaning can dramatically improve the appearance of your home or business by removing dirt, staining and organic growth from visible outdoor areas.
The cost of exterior cleaning depends on factors such as the size of the property, surfaces being cleaned, level of staining and access requirements. Contact us for a free, no-obligation quote tailored to your property.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.