Services
Contact Us
A home wears its neglect on the outside, where there is nowhere to hide it. Indoors, clutter can be tidied away and a tired room closed off, but the exterior is on show at all times, and every streak of algae, patch of moss and dulled wall is there for anyone to see. Exterior cleaning removes that visible neglect, and it works best when the whole outside of a building is treated together rather than one surface at a time. Pro Clean Xtreme takes that whole-property view of homes in Flint Cross, assessing each surface before deciding how to clean it. The value reaches beyond appearance, though. Algae, moss and lichen hold moisture against masonry, render and roofing, and that lingering damp loosens pointing, feeds rot and slowly breaks materials down, so clearing the growth protects the fabric of the building as much as it improves how it looks. A clean, cared-for exterior also lifts the standing of a home, which counts whether it is lived in, sold or let. Because a house combines brick, render, timber, plastic, glass, paving and roofing, matching the method to each is what marks out a thorough clean, with pressure, solution and dwell time all adjusted to suit. For households in Flint Cross, a professionally cleaned exterior clears away the neglect a home cannot conceal and holds it in good condition through the seasons. The sections below set out each part of the work in turn, from the hard surfaces that suit pressure washing to the more delicate finishes that need a gentler touch, so the full scope of an exterior clean is clear.
There is a particular satisfaction in watching a pressure washer reveal a clean strip across a filthy surface, the sharp line between treated and untreated showing at a glance just how much grime had built up unnoticed. That reveal is what makes pressure washing so rewarding, and it is proof of how effectively a controlled high-pressure jet lifts dirt, algae and moss from hard surfaces, driving water into the pores of paving, concrete, brick and stone and flushing out years of accumulation in a single pass. The power behind that transformation has to be controlled to be safe. A jet set too high scars soft stone, strips the sand from block-paving joints and marks concrete, so flow, pressure and nozzle are matched carefully to each surface, and on broad flat areas a rotary cleaner spreads the force to avoid the striping a bare lance can leave. Where oil or heavy staining has set in, hot water is introduced to break down contamination cold water cannot shift. Around Flint Cross, the surfaces most often washed are driveways, patios, paths, steps, yards and boundary walls, each carrying its own blend of grime and biological growth. Beyond the visible transformation, there is a safety gain worth noting, since the film of algae that coats shaded paving is exactly what makes it slippery when wet, and washing it away restores dependable grip underfoot. Handled with proper control, a pressure wash leaves hard surfaces looking close to new and considerably safer to use, and the clean line where the grime ends is a reminder of just how much a good wash actually removes from a surface people had long stopped seeing clearly under the dirt.
No surface around a home works harder than its driveway and patio, and none shows the strain sooner. A drive bears the weight and drips of vehicles day after day, a patio takes constant foot traffic and outdoor living, and both collect fallen leaves, rainwater and the general grime of the seasons, so block paving, natural stone, concrete and slabs all dull and green over well ahead of the walls around them. Patio and driveway cleaning restores these surfaces properly, drawing the embedded dirt up out of the material rather than merely rinsing across the top. The work usually opens by clearing the moss and weeds that colonise the joints between blocks and slabs, since those gaps are where a surface looks most neglected. The settled grime is then lifted from the texture of the paving, recovering an original colour many owners have long since forgotten, while oil marks, tyre scuffs and rust spots are treated with products aimed at them directly. Block paving gains a finishing step, with fresh kiln-dried sand brushed into the joints once the surface is clean and dry, re-locking the blocks, steadying the whole and slowing the return of moss and weeds. For a home in Flint Cross, reviving these hard-worked surfaces makes an immediate difference to how the property reads from the roadside, frequently more than any other single job outside. There is a safety element too, as paving turns slippery once algae settles into the damp and shade, and clearing it restores firm footing. A protective seal can follow to hold the finish and make the next clean of these busy surfaces considerably easier when it comes around.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Investing in a professional, regular exterior cleaning programme in Flint Cross helps protect your property’s external surfaces, maintain their appearance and extend their lifespan. Keeping your building clean and well maintained creates a professional first impression while preventing the build-up of dirt, algae, moss, staining and environmental grime.
The reason a properly cleaned roof stays clean, rather than greening over again within a year, comes down to a single step that is easy to skip: the biocide treatment. Scraping the moss off tiles and slates clears what can be seen, but the microscopic spores left behind in the surface simply regrow, and without treating them the improvement is short-lived. A biocide applied across the covering after the heavier moss is removed kills those spores at the root, holding regrowth at bay for years and giving the work genuine, lasting value. The removal that comes first is done gently. The heavier moss is lifted by hand or with careful scraping, avoiding the fierce high pressure that can crack tiles, unseat them or drive water up beneath the laps into the roof space. Moss is more than an eyesore, holding water against the covering, creeping under the tiles and shedding debris into the gutters below, and it is always heaviest on the shaded, north-facing pitches that never fully dry. A soft, low-pressure method clears it all while leaving the roof intact, with access planned so the work is safe at height. For a home in Flint Cross, a cleaned and treated roof sheds water as designed, keeps the guttering below clear of the debris a mossy roof sheds, and holds its condition for years longer. It is the biocide, working long after the visible cleaning is done, that turns a roof clean from a temporary tidy-up into a lasting improvement genuinely worth the effort of doing properly the first time round.
It is often cheaper, over the life of a system, to keep solar panels clean than to leave them dirty, once the lost generation is added up. Panels only earn their keep when light reaches the cells, and dust, pollen, moss spores and bird droppings all build up on the glass and cut the amount that gets through, so an array left uncleaned quietly produces less electricity month after month, and that shortfall has a real value. Cleaning photovoltaic glass properly recovers it. Purified, deionised water is used because it lifts contamination and then dries perfectly clear, leaving none of the streaking or spotting ordinary tap water leaves behind. Soft brushes on water-fed telescopic poles reach the panels from the ground wherever possible, keeping people safely off the roof and abrasive tools away from a delicate surface. Scouring pads, harsh detergents and high pressure are all avoided, since each can scratch the anti-reflective coating or disturb the seals around the cells. For homeowners in Flint Cross, the benefit shows in the numbers. A clean array captures more of the daylight that falls on it, and the improvement usually appears plainly on the generation figures within days of the work. Set the modest cost of a regular clean against the value of the electricity a dirty array fails to produce, and keeping the glass clear makes plain financial sense, letting the system go on performing close to its rated output rather than losing ground to a build-up that is easily and cheaply prevented well before it can bite into the returns the panels were meant to deliver over their long working life.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first exterior cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on roof tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
The trouble with a blocked gutter is that the damage it causes shows up somewhere else entirely, and often long after the blockage first formed. Leaves, moss and silt gather in the run until water can no longer pass, and from there it spills over the edge and down the wall below, soaking into masonry and render and pooling around the foundations. What arrives as damp patches inside a room, or as green staining spreading up an external wall, frequently traces back to a gutter that has been quietly overflowing for months. Gutter cleaning removes the cause before the damp can take hold. A gutter vacuum draws the debris out from ground level, and a camera confirms each length is genuinely clear rather than skimmed only where it can be seen. Working from the ground keeps time on ladders to a minimum and reaches stretches awkward by hand, and the downpipes are checked as well, since a blockage lower down will back water up along a gutter that looks perfectly clear above. For a home in Flint Cross, keeping the gutters flowing protects everything below them, from the walls and their pointing to the foundations at the base. It is among the most cost-effective pieces of maintenance a homeowner can arrange, a small outlay set against the considerable expense of curing penetrating damp once water has found its way inside. Clearing the system on a sensible schedule, particularly around the autumn leaf fall, keeps water moving where it should and prevents a chain of avoidable and expensive problems from ever getting started somewhere out of sight.
A rendered elevation looks crisp and modern when it is new, but render wears its age in public, and the change is not subtle. The surface is faintly textured and slightly porous, which makes it an ideal foothold for algae and lichen, and before long a wash of green, or the rusty orange of red algae, spreads across the elevations that face the weather or sit in shade. A garden hose barely touches it. This is precisely the work soft washing was made for. High pressure has no place against render, where it can tear the surface, open cracks and force water into the wall behind, leaving damage that costs far more to repair than the cleaning ever would. The correct approach applies a specialist biocide at low pressure, giving it time to work into the growth and kill the algae and lichen at the root. Because the treatment destroys the organisms rather than simply washing off what shows, the finish stays clean for far longer than a surface merely rinsed down. The method adapts to the render in front of it, whether a modern silicone or through-coloured system such as monocouche or K-rend, or an older painted or pebbledash finish, each needing its own mix and dwell time. Judging that correctly is what cleans the wall thoroughly while keeping it intact. For a home in Flint Cross, Pro Clean Xtreme brings render back to the clean, even finish it was chosen for, lifting the appearance of the whole elevation in a single visit and doing so without ever putting the surface at risk.
As a family-run business established in 2016, we have built a reputation across Flint Cross for delivering dependable, high-quality exterior cleaning services. We combine a personal, transparent approach to customer care with continuous investment in the industry’s best low-pressure steam equipment and safety systems. Whether handling a domestic roof clean or a large-scale commercial project, our team prioritises the long-term protection of your property, providing a reliable, fully insured service from start to finish.
We believe in complete transparency and professionalism from the moment you request a quote to the final site clean-up. Our structured, safety-first workflow is designed to keep you fully informed, protect your property and neighbouring assets, and deliver flawless results without any hidden surprises. Whether handling a domestic roof de-mossing or a major commercial pre-solar preparation project, our family-run team follows a meticulous process that guarantees a safe, efficient, and high-quality transformation.
We begin by using Google Earth to accurately measure your roof size, assess property access, and provide an initial quotation based on satellite data.
Once your booking is confirmed, we issue comprehensive public liability insurance documents, a client preparation checklist, and full RAMS (Risk Assessments and Method Statements).
On arrival, we introduce ourselves, notify neighbours regarding potential overspray, and protect your property by sheeting sensitive flower beds and gravel areas.
We clean your roof safely from our cherry picker platform using low-pressure telescopic steam poles, ensuring we never walk on your tiles.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Yes. We use the correct cleaning methods and equipment for each surface to achieve effective results while helping protect your property from unnecessary damage. Softer surfaces such as render and roofing require specialist cleaning techniques rather than aggressive methods
Yes, professional exterior cleaning can remove common problems such as moss, algae, lichen, dirt and weather staining from many outdoor surfaces, helping restore the appearance of your property.
Yes, we provide exterior cleaning solutions for both domestic and commercial properties, helping homeowners, landlords and businesses maintain clean, presentable buildings.
Yes, we clean patios, driveways, paths and other hard exterior surfaces to remove built-up dirt, grime, algae and staining, helping restore their original appearance.
Roof cleaning involves safely removing moss, algae and dirt using suitable equipment and treatments. The correct approach depends on the roof type and condition, ensuring the surface is cleaned effectively while minimising risk.
Professional exterior cleaners have the specialist equipment, experience and knowledge needed to clean different surfaces safely. This helps achieve better results while reducing the risk of surface damage.
Yes, exterior cleaning can dramatically improve the appearance of your home or business by removing dirt, staining and organic growth from visible outdoor areas.
The cost of exterior cleaning depends on factors such as the size of the property, surfaces being cleaned, level of staining and access requirements. Contact us for a free, no-obligation quote tailored to your property.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.