Services
Contact Us
Hard landscaping across Cambridgeshire spends most of the year damp, and the decline that follows is slow enough that nobody notices it happening. Algae films the shaded flags first, moss wedges itself into every joint until the pointing disappears, and lichen fixes to concrete with a grip no stiff broom will ever break. Pressure washing reverses all of it in a single visit. The work is carried out with commercial petrol machines paired to rotary surface cleaners, which hold the jets at a fixed height above the substrate and sweep an even arc across it rather than relying on freehand lance work. That is the difference between a genuinely clean surface and the tiger-striping that gives away a rushed job. Pressure is matched to the material instead of being wound up to maximum and left there for the afternoon. Concrete and tarmac tolerate a firm approach; block paving, sandstone and porcelain need restraint, and tired jointing needs particular care if it is to come through the process intact. Where organic growth is heavy, a biocide pre-treatment softens the root structure first so the wash lifts it out completely instead of skimming the top and leaving it to return within a couple of months. Water is steered away from air bricks, door thresholds and planted borders, and the slurry that comes off is controlled rather than flushed into the nearest gully and forgotten about. Most people searching for pressure washing near me are reacting to a slip hazard as much as an eyesore, and grip underfoot in wet weather is the honest measure of a good jet washing result. Finished work is checked over in daylight, edges and thresholds included, and any re-sanding or sealing needed afterwards is flagged before the team packs up.
Picking a contractor for power washing usually comes down to who will still be answering the phone a fortnight later. Pro Clean Xtreme has built its name on the unglamorous part of the trade: arriving when promised, quoting what the job genuinely costs, and leaving a property tidier than it was found. Operatives are trained on surface identification before they are trained on pressure technique, because the quickest way to wreck good paving is to treat every material as though it were poured concrete. Machines are serviced on a schedule rather than run until something fails on site, and nozzles are replaced once wear starts to widen the fan and drop the strike pattern. The company carries full public liability cover, provides written method statements and risk assessments where a client needs them, and does not subcontract work out to whoever happens to be free that week. Quotes are issued in writing with the scope spelled out, so there is no debate afterwards about whether steps, thresholds or walls were included. Waste water is managed properly, PPE is worn as a matter of routine rather than for the benefit of onlookers, and vehicles are parked with thought for neighbours and access. Communication is the part clients comment on most: a confirmed date, a realistic arrival window, and a call if weather forces a change. Anyone weighing up a local pressure washing company will find plenty of outfits with a machine in a van, and far fewer with the insurance, training and method to back it. Repeat bookings and word-of-mouth referrals do most of the marketing, which is exactly how a service business of this kind should be judged.
The honest answer to what pressure washing costs is that it depends on measurable things, and any quote given blind over the phone is a guess dressed up as a price. Area is the starting point, and most domestic work is priced per square metre once the surface has been measured properly rather than estimated from a photograph. Contamination level moves the figure next: a lightly greened path is a single pass, while paving that has been left a decade needs a biocide treatment, dwell time, a first cut to break the crust and a second pass to finish it evenly. Surface type matters because delicate materials are slower to do safely, and speed is where margin lives in this trade. Access affects the total as well, since hose runs, gated side entries, awkward levels and a shortage of water on site all add labour before a single trigger is pulled. Extras are quoted separately and clearly, including kiln-dried sand replacement in block paving joints and sealing where a client wants the finish protected. A minimum charge applies to very small jobs, simply because setting up and breaking down takes the same time whatever the meterage. Where several areas are cleaned in one visit the rate improves, so combining work is usually the cheapest route. It is worth being wary of quotes that undercut everything else by a wide margin; that gap is normally paid for with no insurance, no biocide, and paving stripped of its jointing. Quotations are free and without obligation throughout Cambridgeshire, with the price fixed in writing before the work is booked and no charges added afterwards.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular pressure washing.
Investing in a professional, regular cleaning programme in Cambridgeshire helps protect your property’s external surfaces, maintain their appearance and extend their lifespan. Keeping your building clean and well maintained creates a professional first impression while preventing the build-up of dirt, algae, moss, staining and environmental grime.
Commercial pressure washing is a different discipline from domestic work, and treating the two the same is how contractors end up locked out of a site after the first visit. Car parks, service yards, loading bays, bin stores, footways outside retail units, fuel forecourts and stairwells all collect a particular kind of soiling: engine oil, tyre rubber, spilled drink, ground-in chewing gum and the black bloom that builds wherever footfall is heavy and sunlight is not. Each of those responds to a different combination of heat, dwell and pressure, and a gum lance deals with what a rotary head simply polishes. Scheduling is planned around trading hours rather than the contractor’s convenience, which in practice means early mornings, evenings or overnight work so that customers and staff never meet a wet floor or a trailing hose. Sites are phased and signed, walkways kept open, and wash water captured or diverted in line with discharge rules rather than pushed into a surface drain and left to be somebody else’s problem. Risk assessments, method statements, insurance certificates and DBS-checked staff are provided before mobilisation for clients whose procurement requires them, and any induction process is followed to the letter. For managing agents and facilities teams across Cambridgeshire, the value sits in reliability: a planned maintenance cycle keeps hard standing presentable and, more importantly, keeps slip claims down over winter when algae builds fastest. Businesses looking for commercial jet washing near me tend to want one contractor who can handle a portfolio on a rolling programme with a single point of contact and consistent standards. That is precisely how the commercial side of the operation is set up, from a single unit to a rolling multi-site programme.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have built a reputation across Cambridgeshire for delivering dependable, high-quality pressure washing services. We combine a personal, transparent approach to customer care with continuous investment in the industry’s best low-pressure steam equipment and safety systems. Whether handling a domestic clean or a large-scale commercial project, our team prioritises the long-term protection of your property, providing a reliable, fully insured service from start to finish.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our pressure washing services. If you have a question about your property, a specific cleaning requirement, or need further information about our services, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution.
The cost of pressure washing in Cambridgeshire depends on the size of the area, the condition of the surface, the level of dirt and staining, and how accessible the area is. A professional assessment can provide an accurate, no-obligation quote based on your specific requirements.
Pressure washing can effectively remove built-up dirt, grime, algae, moss, mud, weathering and other surface contaminants. The appropriate pressure and cleaning method will depend on the material being cleaned and the condition of the surface.
Yes, when carried out correctly. Professional pressure washing uses suitable equipment, pressure levels and techniques for the surface being cleaned. This helps achieve thorough results while reducing the risk of unnecessary surface damage.
The ideal frequency depends on the surface, local conditions and how quickly dirt and organic growth build up. Many properties benefit from pressure washing when surfaces begin to look noticeably dirty, weathered or stained.
Pressure washing can remove many stubborn marks and areas of built-up grime. However, results can vary depending on what caused the staining, how long it has been present and the type of surface. Some particularly persistent stains may require additional treatment.
The time required depends on the size of the area, the condition of the surface and the amount of cleaning needed. Smaller areas may be completed relatively quickly, while larger or heavily soiled areas can take longer.
Professional pressure washing provides a more thorough and controlled clean than basic domestic equipment. The right equipment and cleaning approach can help restore the appearance of tired, dirty surfaces while ensuring the work is carried out carefully and effectively.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.