Services
Contact Us
Autumn is when it starts. Leaf litter sits on paving for a fortnight, holds moisture against the surface, and by February the flags have turned green and the joints have gone soft with moss. By the following autumn the black speckling of lichen has joined it, and at that point a brush and a bottle of household cleaner are wasting an afternoon. Pressure washing breaks that cycle properly. The growth is not sitting on top of the stone but rooted into the pores of it, which is why a professional wash uses a rotary surface cleaner running at a controlled distance and a consistent overlap, cutting the contamination out of the substrate rather than pushing it around. Machines run hot where the soiling calls for it, because heat does work that raw pressure cannot, particularly on greasy or trafficked ground. Before anything is switched on, the surface gets identified and tested in a discreet corner, since the pressure that strips concrete safely will scar sandstone and blow the face off soft brick paving. Heavily colonised areas are pre-treated with a biocide and given time to work, so the wash removes the root system instead of trimming the top and inviting it straight back. Rinsing runs in a planned direction, keeping slurry away from thresholds, planted borders and air bricks. What people in Orton usually notice first is not the colour change but the grip; algae-covered ground in December is genuinely dangerous, and searching for pressure washing near me is more often about a near-miss than about appearances. The finish is inspected in daylight before the equipment goes back in the van, edges and steps included.
There is a reason a hired machine from a tool shop rarely produces the result people imagined. Domestic units deliver a fraction of the flow rate professional kit does, and flow, not pressure, is what carries dirt away. Hand a beginner a straight lance and the result is a striped surface, gouged jointing and a full afternoon gone. Pro Clean Xtreme runs commercial machines with matched surface cleaners, hot-water capability where it earns its place, and nozzles replaced on wear rather than on failure. Just as importantly, the operatives know which surfaces to slow down for. Training covers substrate identification, dwell times, chemical dilution and safe discharge before it ever covers technique with a trigger gun. Knowing when to stop is part of that: some jointing is too far gone to survive a wash and is better repointed before any water reaches it, and saying so at survey stage saves a difficult conversation later. The business is fully insured for public liability, works to written method statements when a client asks for them, and turns up with the same crew rather than passing jobs to whoever is free. Quotations are put in writing with the scope described plainly, so nobody argues afterwards about whether steps, walls or thresholds were part of the job. Sites are left swept, gullies cleared of slurry and gates closed. Weather changes get a phone call, not silence. None of this is glamorous, but a jet washing job goes wrong in exactly these unglamorous places, and the difference shows up months later when the treated ground is still clean and the untreated one has greened over again. Most new bookings arrive by recommendation from a previous customer, which is the only endorsement that carries much weight in this trade.
What changes the price? Size first. Work is measured on site and priced per square metre, because an estimate from a photograph is guesswork and guesswork gets corrected upwards on the day. Then condition: freshly greened ground is a single pass, while a surface untouched for a decade needs biocide, dwell time, a cutting pass and a finishing pass, which is three times the labour for the same meterage. Material is next, since delicate stone and porcelain must be worked slowly and carefully while concrete and tarmac can be pushed harder. Access moves the figure too, as long hose runs, narrow side gates, steps between levels and no outside tap all add time before the trigger is pulled. What about extras? Kiln-dried sand for block paving joints and protective sealing are quoted as separate lines rather than buried in the total, so the choice stays with the customer. Small jobs carry a minimum charge, because loading, setting up, breaking down and cleaning equipment take the same time whether the area is ten metres or a hundred. Larger areas earn a better rate per square metre for exactly the same reason, so having everything done in a single attendance usually costs less than splitting the work across two visits months apart. Why do some quotes look absurdly cheap? Usually because they omit insurance, skip the biocide, use worn nozzles and strip the jointing out in the process, leaving paving that needs remedial work within a year. Anyone comparing prices for pressure washing services near me is better served comparing what is actually included. Written, itemised, free quotations remove that problem entirely, and in Orton the figure quoted is the figure invoiced.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular pressure washing.
Investing in a professional, regular cleaning programme in Orton helps protect your property’s external surfaces, maintain their appearance and extend their lifespan. Keeping your building clean and well maintained creates a professional first impression while preventing the build-up of dirt, algae, moss, staining and environmental grime.
Commercial work covers ground domestic jobs never touch. Retail parades need footways and entrance aprons kept presentable and safe, because the first thing a customer notices about a unit is what is under their feet. Industrial estates need service yards and loading bays cleared of oil and rubber deposits that turn lethal in the rain. Offices need staff car parks, walkways and bin stores kept in a condition that reflects on the occupier. Pubs and restaurants need external seating areas, cellar drops and rear service ways degreased on a regular cycle. Schools and care settings need hard standing that is safe underfoot every winter, with work carried out outside occupied hours. Each of those sectors brings different soiling and a different rulebook. Chewing gum comes off with a dedicated steam lance, not a rotary head. Oil needs a degreasing agent and dwell time before any water touches it. Line markings, tactile paving and expansion joints are worked around at reduced pressure so that nothing is lifted, faded or forced apart during the clean. Discharge of wash water is controlled in line with the site drainage, which means capture or diversion, never simply flushing it into a surface gully. Attendance is scheduled around trading hours, so evening, overnight and early-morning starts are standard, with barriers, signage and phased working keeping routes open throughout. Certificates of insurance, risk assessments and method statements are issued before mobilisation, and site inductions are followed as written. Businesses in Orton searching for commercial pressure washing near me generally want the same three things: a contractor who fits around the operation, a consistent standard across every visit, and one number to call when the schedule needs changing.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have built a reputation across Orton for delivering dependable, high-quality pressure washing services. We combine a personal, transparent approach to customer care with continuous investment in the industry’s best low-pressure steam equipment and safety systems. Whether handling a domestic clean or a large-scale commercial project, our team prioritises the long-term protection of your property, providing a reliable, fully insured service from start to finish.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our pressure washing services. If you have a question about your property, a specific cleaning requirement, or need further information about our services, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution.
The cost of pressure washing in Orton depends on the size of the area, the condition of the surface, the level of dirt and staining, and how accessible the area is. A professional assessment can provide an accurate, no-obligation quote based on your specific requirements.
Pressure washing can effectively remove built-up dirt, grime, algae, moss, mud, weathering and other surface contaminants. The appropriate pressure and cleaning method will depend on the material being cleaned and the condition of the surface.
Yes, when carried out correctly. Professional pressure washing uses suitable equipment, pressure levels and techniques for the surface being cleaned. This helps achieve thorough results while reducing the risk of unnecessary surface damage.
The ideal frequency depends on the surface, local conditions and how quickly dirt and organic growth build up. Many properties benefit from pressure washing when surfaces begin to look noticeably dirty, weathered or stained.
Pressure washing can remove many stubborn marks and areas of built-up grime. However, results can vary depending on what caused the staining, how long it has been present and the type of surface. Some particularly persistent stains may require additional treatment.
The time required depends on the size of the area, the condition of the surface and the amount of cleaning needed. Smaller areas may be completed relatively quickly, while larger or heavily soiled areas can take longer.
Professional pressure washing provides a more thorough and controlled clean than basic domestic equipment. The right equipment and cleaning approach can help restore the appearance of tired, dirty surfaces while ensuring the work is carried out carefully and effectively.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.