Services
Contact Us
Different surfaces need genuinely different treatment, and the skill sits in knowing which is which before the machine starts. Poured concrete is tough and takes a firm, hot approach, though a worn or brushed finish will show every inconsistent pass, so overlap discipline matters more than power. Block paving cleans up beautifully but is only as stable as the sand between the units, so pressure is kept lower, the lance angle is controlled and joints are refilled with kiln-dried sand afterwards. Natural stone such as sandstone and limestone is porous and soft in places, and an overpowered pass will raise the grain permanently, so it is worked at reduced pressure with chemical treatment doing more of the lifting. Porcelain is dense and forgiving on the face but the grout lines are not, so those get worked deliberately rather than blasted. Tarmac holds bitumen at the surface and will scar under a rotary head held too long in one spot, so speed and consistency are everything. Timber decking has grain that opens under pressure, so it is cleaned along the boards at low pressure with a fan tip. Composite boards need lower pressure again, since the polymer face marks permanently under a concentrated jet and those marks cannot be sanded out afterwards. Brickwork and rendered walls, stairs, thresholds and stone kerbs each get hand-lance detail. Every one of those calls is made on site after a test area, which is precisely what separates professional pressure washing from renting a machine and hoping. Properties in Werrington often combine three or four of these materials in one small area, so a single pressure setting for the whole job is never the right answer.
Kit and knowledge are what a customer is actually paying for. Pro Clean Xtreme runs commercial petrol-driven machines with the flow rate needed to carry contamination away rather than merely loosen it, matched to enclosed rotary surface cleaners that hold a fixed jet height and produce an even, stripe-free finish. Hot-water capability is available where heat does the work that pressure alone cannot, particularly on greasy or heavily trafficked ground. Nozzles are treated as consumables and swapped on wear, because a worn tip quietly widens the fan and loses strike force long before anyone notices the results getting thinner. Hoses, guns and lances are inspected before each job, and machines are serviced on a schedule rather than run to failure on someone’s property. Water supply is planned in advance too, with buffer tanks carried where a site cannot feed a machine quickly enough, because starving a pump damages it and produces a patchy finish long before it fails outright. Behind the equipment sits training: surface identification, chemical selection and dilution, dwell times, safe working at ground level and around drainage, and the discipline of testing an inconspicuous area first. Operatives carry the right PPE and use it routinely. The company is fully insured, provides documentation when it is asked for, and does not hand work to subcontractors. Householders in Werrington searching for a power washing company near me will find no shortage of vans with a machine in the back; the difference lies in whether the person holding the lance knows when to ease off. Investment in equipment is straightforward to make. Judgement takes years, and it is the part that protects the surfaces being cleaned.
Pricing works in one of three ways, and it helps to know which applies. One-off domestic work is measured on site and priced per square metre, with the rate adjusted for how contaminated the ground is and what it is made of. Neglected surfaces sit at the higher end because they need biocide, dwell time and multiple passes rather than one. Fixed-price quotations suit defined jobs where the scope is clear, giving a single figure agreed in writing before any work is booked, with no additions afterwards. Maintenance arrangements suit anyone who would rather never see the green return: a scheduled light clean at agreed intervals, priced lower per visit because the ground never falls back into a heavy state. That third option is almost always the cheapest route over several years, though it is the one people consider least often. Around all three sit the same variables. Access affects labour, so long hose runs, gated entries and split levels add time. Availability of water on site matters. So does the preparation needed before a machine can start, since overgrown edges, weed growth in joints and thick leaf mulch all have to be cleared by hand first, and that labour is quoted openly rather than absorbed into a rate that then moves on the day. Optional work such as joint sand replacement and protective sealing is itemised separately so it can be accepted or declined. Very small jobs attract a minimum charge, and combining areas into a single visit reduces the rate because set-up is shared. Free quotations are provided throughout Werrington after the area has been seen and measured, which is the only honest basis for a price on jet washing near me.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular pressure washing.
Investing in a professional, regular cleaning programme in Werrington helps protect your property’s external surfaces, maintain their appearance and extend their lifespan. Keeping your building clean and well maintained creates a professional first impression while preventing the build-up of dirt, algae, moss, staining and environmental grime.
The hardest part of commercial work is rarely the cleaning. It is fitting the cleaning around a business that cannot stop. A car park cannot be closed at midday, a loading bay cannot be blocked at delivery time, and a footway outside a shop cannot be wet when it is busiest. So the programme is built backwards from the operation. Site visits establish trading hours, delivery windows, pedestrian routes and drainage arrangements. The area is then divided into phases small enough that a section can be washed, rinsed and dried off before the next is opened, with barriers, cones and signage moving through the site as the work progresses. Attendance is booked for whatever time causes least disruption, which in practice usually means an early-morning start, an evening shift or overnight working with appropriate lighting. Noise-sensitive settings get machinery positioned to minimise it. Vehicle movements are planned the same way, with the van sited where it will not block a fire route, a delivery bay or an accessible parking space for the length of the visit. Hose runs are matted or routed away from walkways so nothing becomes a trip hazard. Wash water is captured or diverted according to the site’s drainage rather than discharged into a surface gully. Progress is reported at handover with photographs where a client wants them for the maintenance file. Insurance certificates, risk assessments and method statements are supplied before mobilisation and inductions are attended as required. For facilities teams and managing agents in Werrington, commercial pressure washing works best as a planned cycle rather than a reaction, because a scheduled visit at the right time of year takes hours where a rescue job takes days.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have built a reputation across Werrington for delivering dependable, high-quality pressure washing services. We combine a personal, transparent approach to customer care with continuous investment in the industry’s best low-pressure steam equipment and safety systems. Whether handling a domestic clean or a large-scale commercial project, our team prioritises the long-term protection of your property, providing a reliable, fully insured service from start to finish.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our pressure washing services. If you have a question about your property, a specific cleaning requirement, or need further information about our services, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution.
The cost of pressure washing in Werrington depends on the size of the area, the condition of the surface, the level of dirt and staining, and how accessible the area is. A professional assessment can provide an accurate, no-obligation quote based on your specific requirements.
Pressure washing can effectively remove built-up dirt, grime, algae, moss, mud, weathering and other surface contaminants. The appropriate pressure and cleaning method will depend on the material being cleaned and the condition of the surface.
Yes, when carried out correctly. Professional pressure washing uses suitable equipment, pressure levels and techniques for the surface being cleaned. This helps achieve thorough results while reducing the risk of unnecessary surface damage.
The ideal frequency depends on the surface, local conditions and how quickly dirt and organic growth build up. Many properties benefit from pressure washing when surfaces begin to look noticeably dirty, weathered or stained.
Pressure washing can remove many stubborn marks and areas of built-up grime. However, results can vary depending on what caused the staining, how long it has been present and the type of surface. Some particularly persistent stains may require additional treatment.
The time required depends on the size of the area, the condition of the surface and the amount of cleaning needed. Smaller areas may be completed relatively quickly, while larger or heavily soiled areas can take longer.
Professional pressure washing provides a more thorough and controlled clean than basic domestic equipment. The right equipment and cleaning approach can help restore the appearance of tired, dirty surfaces while ensuring the work is carried out carefully and effectively.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.