Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
Newer housing greens up faster than most owners expect, and the reason lies in how modern render is built rather than in anything the householder has done wrong. Contemporary homes are typically finished in thin-coat systems: silicone, acrylic, mineral or monocouche, applied a few millimetres thick over insulation or blockwork and given a scraped, floated or dashed texture. These finishes are attractive, colour-stable and quick to apply, but the texture giving them character also gives spores somewhere to lodge, and the pale colours specified on most new developments show green and black discolouration far sooner than a dark or heavily patterned wall would. Elevations on newer estates also tend to be closely spaced, with limited air movement between buildings and shaded gables facing close boundaries. Those walls dry slowly, and slow drying is the single largest factor in how quickly colonisation takes hold. Landscaping on newer plots compounds it, since young planting sits close to walls and shelters the render beneath it before it has matured enough to be cut back. Treatment for these systems is soft wash and nothing else. Colour runs through the coating rather than sitting on top of it, so any abrasive method removes pigment permanently and cannot be corrected without recoating an entire panel. Biocide is applied at a dilution suited to a low-porosity surface, given proper dwell time, then rinsed gently away. Because the coating absorbs very little, dwell is judged carefully to stop solution running before it has worked. Homes in Alconbury Weald generally clean up extremely well because the coatings are sound and the growth is comparatively young, and treating early keeps the interval between visits long rather than allowing the surface to become entrenched over successive winters.
Modern render systems come with manufacturer maintenance guidance, and most of it is never read by the people who own the buildings. Following it matters, because thin-coat finishes carry warranties that can be affected by how they are cleaned. Pro Clean Xtreme works to those specifications rather than around them. Silicone, acrylic, mineral and monocouche manufacturers broadly agree on the same points: no abrasive methods, no high impact water, appropriate biocidal treatment applied at controlled dilution, no aggressive alkaline or acidic products, and gentle rinsing. Where a system has published guidance, it is followed and the method statement reflects it. Identifying the system correctly is the first requirement, and on newer property that is not always obvious. Silicone and acrylic finishes look similar, monocouche is often mistaken for either, and rendered extensions frequently use a different product to the original build. Getting it wrong risks either an ineffective clean or a damaged panel, and neither outcome is recoverable without cost falling on somebody. The practical consequences are worth understanding. Thin-coat render cannot be spot-repaired invisibly. Damage to one section generally means recoating the whole panel between expansion joints, which is a substantial cost and entirely avoidable with the correct method applied from the outset. Householders in Alconbury Weald receive a survey identifying the system, a written and fixed quotation setting out the method, and full documentation including insurance certification, COSHH data and height safety qualifications. No deposit is taken and nothing is payable until the work is complete and you have inspected it. Where a property remains within a developer warranty period, that is taken into account before anything is applied.
Render cleaning on newer housing generally prices at the lower end of the scale, for several straightforward reasons. Thin-coat systems are low porosity, so solution sits on the surface and works efficiently rather than soaking in, which reduces the volume of product required. Growth on relatively young render is usually algae and early black staining rather than mature lichen, so dwell times are shorter and second applications are rarely necessary. Modern plots also tend to have compact elevations with clear access on at least three sides, which keeps set-up quick. In practice that means townhouses and terraced plots commonly fall between £280 and £430, semi-detached homes between £400 and £620, and detached properties between £550 and £880, with larger four and five bedroom houses or three-storey townhouses quoted individually after survey. Most work equates to £4 to £8 per square metre of treated wall. The bigger saving on a modern development comes from booking together. Because plots sit close and elevations are similar, treating several homes in one visit spreads mobilisation, set-up and travel across all of them, and the reduction per property is usually significant. Groups of owners, residents’ associations and management companies frequently arrange exactly this, and a single quotation can cover multiple addresses with individual invoices raised against each. Households in Alconbury Weald can request a free survey and a written fixed price, with no deposit and payment due only on completion. Where a management company is responsible for communal or shared elevations, those are quoted separately so nothing is duplicated between the company’s scope and an individual owner’s.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular render cleaning.
Keep your property looking clean, fresh and well maintained with professional render cleaning in Alconbury Weald. Over time, rendered walls can become affected by algae, moss, dirt, staining and other environmental contaminants, leaving the exterior looking tired and discoloured. Our professional render cleaning service is designed to safely restore the appearance of rendered surfaces without causing unnecessary damage.
Modern business parks present render at scale on some of the most method-sensitive coatings in commercial property. Office pavilions, hybrid units, headquarters buildings and campus terraces are almost universally finished in thin-coat silicone, acrylic or mineral render, frequently over external wall insulation, and these systems will not tolerate anything abrasive without permanent damage to panels that cannot be spot-repaired. Treatment is soft wash throughout, applied at controlled dilution with dwell judged against the low porosity of the coating and rinsed gently. Method statements reference the manufacturer’s maintenance guidance for the system identified on site, which matters where a building remains within a warranty period or where an insulation system carries its own certification. Planning is built around occupation. Elevations are sequenced so entrances, reception approaches, car parking, cycle stores and fire routes stay usable, with work programmed early morning, evening or weekend where daytime disruption would be unacceptable. Curtain walling, glazing, louvres, signage, lighting, cameras, air handling intakes and landscaping are protected or isolated before any application begins, and occupier notification is issued in advance through the managing agent. Access is specified after assessing ground bearing, service routes and standing space. Extended soft wash equipment covers a great deal of multi-storey work from ground level, with towers or boom platforms used where the structure or inspection requirements demand them. Managing agents, estates teams and occupiers on parks in Alconbury Weald can arrange a survey, a written specification per building and elevation, a fixed price and a programme, supported by risk assessments, method statements, COSHH data and insurance certification. Multi-building estates are typically best maintained on a rolling cycle within an agreed annual budget.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
Whether your render has developed green algae, dark staining or general weathering, professional cleaning can make a significant difference to the appearance of your property. We take care to assess the condition and type of render before cleaning, helping us select an appropriate approach for the surface. This allows us to achieve thorough results while minimising the risk of damage to delicate or textured finishes.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
There is no fixed schedule as it depends on the property’s location, exposure and surrounding environment. Render that is shaded or surrounded by trees may require cleaning more frequently.
Yes. Professional render cleaning can remove algae and other organic growth that has developed across the surface.
The correct cleaning method should be selected based on the type and condition of the render. We assess the surface before cleaning to help ensure an appropriate approach is used.
Professional cleaning can significantly improve render affected by dirt, algae, organic growth and black staining. The final result can depend on the severity and age of the staining.
Yes. Render cleaning can be carried out on many types of residential and commercial properties, helping maintain a clean and professional exterior.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
