Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
A render clean follows a set sequence, and knowing what that sequence looks like makes it far easier to judge whether it is being done properly. The crew arrives and walks the perimeter first, noting the render system, any cracked or blown sections, the position of vents, light fittings, alarm boxes and rainwater goods, and where run-off will naturally travel. Nothing is applied until that assessment is finished. Protection comes next. Glazing, frames, doors, garage openings and painted timber are sheeted or masked. Borders, lawns, hedging and pots against the wall are saturated with clean water first, which dilutes anything reaching them and prevents uptake. Paving beneath the elevation is wetted for the same reason. Application follows, working from the top of each elevation downwards in overlapping passes so no strip is missed and no section receives double coverage. The biocide is delivered at low volume through soft wash equipment, wetting the surface evenly without driving water into joints or beneath the coating. Dwell time varies with temperature, growth type and render porosity, and is judged on site rather than fixed in advance. Rinsing is gentle and controlled, taking loosened algae and surface dirt away with it. Heavy lichen is deliberately left to break down naturally over the weeks that follow rather than being scraped off, since scraping damages the texture underneath. Finally the site is cleared, sheeting removed, paving washed down and a walk round completed with the householder. Most homes in Bretton are finished within a day. The elevation looks markedly better immediately and continues lightening for several weeks as the remaining growth dies back and weathers off in the rain.
The measure of a render clean is not how the wall looks on the afternoon the crew leaves, because almost any method achieves a short-term improvement. The measure is how it looks in three years. That is the standard the work is set against, and it is why every treatment is built around a biocide that keeps killing growth long after application rather than a wash that only removes what is currently visible. Achieving that consistently takes discipline in unglamorous places: correct dilution for the growth and the coating, full coverage with no missed strips, adequate dwell time even when the weather is against it, and honest scheduling so jobs are not rushed to fit three properties into a day that only holds two. Crews are sized to the elevation rather than to the diary. Every operative is trained in soft wash application and safe work at height, and full public liability cover is held with certification available on request. Quotations are written, itemised and fixed. Dates are confirmed and kept, and if weather forces a change you are told the day before rather than left waiting. Householders in Bretton also get straightforward advice about what render cleaning cannot do. It will not disguise cracking, it will not restore a coating that has already failed, and it will not deliver a uniform finish on a wall patch-repaired in a different material. Saying so beforehand is far better than explaining it afterwards. Where an elevation genuinely will not clean up to a satisfactory standard, that assessment is given free and without any pressure to book work regardless.
Plenty of homeowners consider tackling render themselves before picking up the phone, so it is worth setting the numbers side by side. Doing it yourself means hiring or buying application equipment, purchasing a suitable biocide in quantity, sourcing sheeting and masking, and either hiring a tower or working from ladders at height. Realistically that lands somewhere between £200 and £400 before a single hour of your own weekend has been spent, and it assumes you dilute correctly, achieve full coverage and avoid streaking the elevation permanently. A professional clean by Pro Clean Xtreme on a typical semi-detached property sits around £400 to £600, with smaller terraced homes from roughly £280 and larger detached properties between £550 and £900 depending on height and how heavy the lichen has become. Most residential work equates to between £4 and £8 per square metre of treated wall. The gap narrows considerably once risk is priced in. The commonest do-it-yourself outcomes are uneven colour where concentration varied between passes, tide marks where solution ran before it was spread, damage to planting that was never pre-wetted, and falls from ladders standing on soft or sloping ground. Any one of those costs more to put right than the original saving. There is also the question of how long it lasts. Correctly applied treatment keeps an elevation clear for three to five years. An under-strength or partial application typically shows regrowth within twelve months, meaning the whole job comes round again far sooner. Quotations for properties in Bretton are free, fixed in writing, and set out exactly what is included so comparisons can be made properly rather than on a headline figure alone.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular render cleaning.
Keep your property looking clean, fresh and well maintained with professional render cleaning in Bretton. Over time, rendered walls can become affected by algae, moss, dirt, staining and other environmental contaminants, leaving the exterior looking tired and discoloured. Our professional render cleaning service is designed to safely restore the appearance of rendered surfaces without causing unnecessary damage.
A rendered commercial frontage is read by customers before anything else about the business is. Green streaking down a retail unit, blackened panels above a doorway or a stained gable facing the car park all say the same thing: this building is not being looked after. Whether or not that reflects the operation inside, it is the impression that lands, and it lands on customers, tenants, inspectors and anyone assessing the property for lease or purchase. Commercial render cleaning restores the intended finish and keeps it there. Work is planned around trading rather than in spite of it, with early morning starts before opening, evening and overnight attendance, weekend working and phased elevations all used to keep entrances, deliveries and pedestrian routes clear. Signage, shopfront glazing, lighting, cameras and ventilation are protected or isolated during preparation rather than worked around afterwards. Sectors regularly handled include retail parades and standalone stores, restaurants and licensed premises, hotels, offices, industrial units, distribution facilities, healthcare and education buildings and managed residential blocks. Scale is not a limitation: extended soft wash equipment, mobile towers and powered access cover multi-storey elevations, and larger schemes are sequenced elevation by elevation so no part of a site is ever fully obstructed. Documentation is provided as standard, including risk assessments, method statements, insurance certification and COSHH information for every product used. Businesses in Bretton searching for commercial render cleaning near me can book a survey, receive a written specification and agree a fixed programme before anything is committed. Maintenance contracts are available where a property is best kept on a fixed cycle rather than cleaned only once it starts to look visibly neglected.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
Whether your render has developed green algae, dark staining or general weathering, professional cleaning can make a significant difference to the appearance of your property. We take care to assess the condition and type of render before cleaning, helping us select an appropriate approach for the surface. This allows us to achieve thorough results while minimising the risk of damage to delicate or textured finishes.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
There is no fixed schedule as it depends on the property’s location, exposure and surrounding environment. Render that is shaded or surrounded by trees may require cleaning more frequently.
Yes. Professional render cleaning can remove algae and other organic growth that has developed across the surface.
The correct cleaning method should be selected based on the type and condition of the render. We assess the surface before cleaning to help ensure an appropriate approach is used.
Professional cleaning can significantly improve render affected by dirt, algae, organic growth and black staining. The final result can depend on the severity and age of the staining.
Yes. Render cleaning can be carried out on many types of residential and commercial properties, helping maintain a clean and professional exterior.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
