Services
Contact Us
Some marks on a rendered wall come from something the building itself is doing rather than from anything growing on it, and identifying the source matters because treatment alone will not stop it recurring. Extract terminals are comfortably the commonest of them. A kitchen or bathroom extract discharging onto a wall face rather than clear of it produces a fan-shaped stain of grease, lint and condensate that bonds into the texture and feeds growth around it continuously. Tumble dryer outlets do the same, and the mark below them is usually the worst on the elevation. Boiler flues produce a similar effect with condensate, frequently accompanied by a lighter bleached area immediately around the terminal itself where the plume has affected the surface. Overflow pipes leave a narrow vertical stain that reappears every time the fitting they serve overflows again, and a dripping outside tap or hose bib does exactly the same thing at low level. Copings and sills without drips let water track back onto the face, producing the vertical streaking common on almost every untreated property. And metal fixings, brackets and wall ties sitting close to the surface leave rust staining that no biocide affects at all. All of that is treatable up to a point. The organic growth around a source clears, the bonded material improves, and the elevation looks considerably better. But the source continues, so in time the mark returns. Properties in Fulbourn are surveyed with every staining source identified and recorded, so the customer knows which marks will stay away and which will not.
Treating a stain without ever mentioning what is producing it is a short-sighted way to work, and every survey here records the source alongside the symptom it causes. That means naming plainly whatever was found. An extract discharging onto the wall rather than clear of it. A flue terminal too close to the surface. An overflow that has clearly been running. A sill without a drip. A bracket rusting into the render. A gutter joint dripping in one place. Each one is recorded in writing, photographed and pointed out during the survey where the customer is available, because seeing it explains the problem far better than reading about it ever does. None of that remedial work is carried out here, and none of it is ever charged for as advice. Where somebody else is needed to deal with it, that is said plainly, and no name is offered at all unless there is genuine experience of the trade concerned. Honest expectations are set alongside the finding itself. The growth clears, the bonded material improves substantially, and the elevation looks better, but the mark will return while the source remains. That is explained before the work rather than afterwards. The alternative is a customer paying for a treatment, seeing a stain reappear within a year and then quite reasonably concluding that the work itself was poor. Householders in Fulbourn therefore receive a written record of every staining source that was found, along with an honest description of what will and will not stay away once the wall has been treated.
Where part of a wall will recolonise sooner because something above or beside it keeps producing a stain, that is priced and explained honestly rather than absorbed quietly into a figure. The treatment itself costs exactly the same. Standard bands apply: £280 to £430 terraced, £400 to £620 semi-detached and £550 to £880 detached, at £4 to £8 per square metre, and the whole elevation is treated regardless of which parts will hold and which will not. What changes instead is the interval quoted for that wall. An elevation carrying an active extract stain, a leaking joint or an overflowing outlet is given its own expected interval rather than sharing the figure for the rest of the property, and that is stated in writing at handover. The practical consequence for a customer is worth spelling out. Dealing with the source before the treatment, where that is straightforward, means the whole elevation holds for the full interval rather than one strip pulling it back to two years. Extending a flue terminal, fitting a drip to a sill or repairing a gutter joint typically costs a fraction of a treatment and changes how the wall behaves permanently. Where a source cannot easily be dealt with, treating the wall anyway is still worthwhile, since the rest of the elevation benefits fully and the affected strip improves substantially even if it will not stay clear indefinitely. Properties in Fulbourn are quoted with those areas identified separately, so the decision about whether to fix a cause first can be made on real information.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular render cleaning.
Keep your property looking clean, fresh and well maintained with professional render cleaning in Fulbourn. Over time, rendered walls can become affected by algae, moss, dirt, staining and other environmental contaminants, leaving the exterior looking tired and discoloured. Our professional render cleaning service is designed to safely restore the appearance of rendered surfaces without causing unnecessary damage.
Hospitals and healthcare estates present render cleaning across an environment that never closes at all, and where the consequences of getting anything wrong are considerable. The estate is varied and frequently sprawling: ward blocks, outpatient and clinic buildings, theatres and diagnostics, administration and records, education and training facilities, plant rooms, pathology premises, staff accommodation and multi-storey car parks, with rendered elevations across a great many of those buildings. Clinical constraints dominate the whole programme. Ventilation, extract, filtration and any plant serving theatres, isolation facilities, pharmacy or laboratories is identified and isolated before equipment is unloaded, with the estates team confirming what may be affected and what must not be. Elevations serving wards are treated when windows can be confirmed closed, and application ceases in any wind that could carry solution toward an intake. Access routes across the site are inviolable. Ambulance approaches, emergency entrances, helipad access, accessible parking, ramps and drop-off points stay entirely clear at all times, with exclusion zones barriered and supervised and the crew standing clear immediately where an emergency vehicle approaches. Patient experience matters a great deal too, and soft washing suits these buildings because it is quiet, dust-free, entirely free of vibration and requires no scaffold on most structures. Pro Clean Xtreme supplies comprehensive documentation ahead of mobilisation: risk assessments, method statements, COSHH data sheets, insurance certification and operative qualifications, together with any permits the trust requires. Estates and facilities teams responsible for healthcare premises in Fulbourn can arrange a whole-estate survey, receive fixed prices per building and agree a phased, interruptible programme.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
Whether your render has developed green algae, dark staining or general weathering, professional cleaning can make a significant difference to the appearance of your property. We take care to assess the condition and type of render before cleaning, helping us select an appropriate approach for the surface. This allows us to achieve thorough results while minimising the risk of damage to delicate or textured finishes.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
There is no fixed schedule as it depends on the property’s location, exposure and surrounding environment. Render that is shaded or surrounded by trees may require cleaning more frequently.
Yes. Professional render cleaning can remove algae and other organic growth that has developed across the surface.
The correct cleaning method should be selected based on the type and condition of the render. We assess the surface before cleaning to help ensure an appropriate approach is used.
Professional cleaning can significantly improve render affected by dirt, algae, organic growth and black staining. The final result can depend on the severity and age of the staining.
Yes. Render cleaning can be carried out on many types of residential and commercial properties, helping maintain a clean and professional exterior.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.