Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
Very few buildings are rendered from ground to eaves on every face, and the junctions where render meets something else are where care is most needed. Brick plinths beneath a rendered upper wall are comfortably the commonest arrangement. The line between the two collects dirt and growth on both sides, and the bell-cast or drip detail at the bottom of the render is effectively a shelf that holds moisture. Treatment covers the render fully, works that detail carefully, and stops at the brick rather than running solution down onto it. Timber cladding is by some distance the most vulnerable neighbour a rendered wall can have. Painted, stained or oiled boards react differently to solution, and anything reaching them can lift colour or leave shadowing that will not come out afterwards. Cladding adjacent to a treated wall is sheeted rather than dampened and hoped for. Tile hanging, stone, feature panels and glazed sections all sit within the same category: protected rather than treated, with the render worked up to them and no further. Then there are the transitions people forget. Render returning into a brick reveal. A rendered gable meeting a tiled elevation. A panel of render between two areas of blockwork. Each has an edge, and edges are where a fast pass either stops short and leaves a band or overruns and marks the material alongside. Pro Clean Xtreme measures only rendered area at survey and protects everything else, so properties in Leverington with mixed elevations are priced on what is actually being treated and finished with clean, deliberate edges rather than approximate ones.
Protecting the wall’s neighbours takes longer than treating the wall, and on mixed elevations it is comfortably the larger part of the day. Timber comes first in every case. Cladding, barge and fascia boards, painted joinery, garage doors, gates and garden structures within reach of the working area are sheeted rather than merely wetted, because a stain or a paint film can lift and cannot be put back afterwards. Metalwork comes next on the list. Powder-coated frames, railings, canopy supports, light fittings, alarm boxes and any aluminium or galvanised element is covered, since solution left to dry on those surfaces can mark them permanently. Glazing and seals are sheeted as standard on every elevation, along with any rubber gasket, trickle vent or extract terminal that would rather not receive anything at all. Stone, brick and tile alongside a rendered area are protected as well. They tolerate treatment far better than timber does, but the aim is a clean line at the junction rather than a treated wall sitting above a paler patch of brickwork. Hard surfaces beneath every junction are wetted before work begins and washed down afterwards, so nothing is left to dry in place along a boundary between two different materials. All of that is included within the quoted figure rather than itemised, which is a large part of why properties with mixed elevations sit where they do within their bands. Householders in Leverington receive a written quotation naming which surfaces are being treated and which are being protected, so there is no ambiguity about either on the day.
Where a building is only partly rendered, what gets measured and what gets deducted has a direct effect on the quotation. Only rendered surfaces are ever treated here, so only rendered surfaces appear in the price. Brick plinths, stone, tile hanging, timber cladding, glazing and doors are all deducted from the measured area, which on a part-rendered house can remove a third of what a casual glance would suggest is treatable wall. That should make these properties cheaper to treat, and in pure area terms it certainly does. What offsets that saving is the protection required. Every junction has to be masked or sheeted, every adjoining material covered, and the edges worked deliberately rather than passed over. A house with render above and brick below takes longer per treated square metre than one rendered throughout. The net effect is that part-rendered properties usually land mid-range within their band rather than at the bottom of it: £280 to £430 terraced, £400 to £620 semi-detached and £550 to £880 detached, at £4 to £8 per square metre of render. Two things in particular push the figure further up the band. Extensive timber cladding is the first, since it requires full sheeting rather than simple covering. Feature panels of render set within another material are the second, because each panel is a separate small area with four edges and its own protection requirements. Quotations for properties in Leverington state the measured rendered area alongside the price, so it is clear exactly what is being charged for and what is simply being protected.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular render cleaning.
Keep your property looking clean, fresh and well maintained with professional render cleaning in Leverington. Over time, rendered walls can become affected by algae, moss, dirt, staining and other environmental contaminants, leaving the exterior looking tired and discoloured. Our professional render cleaning service is designed to safely restore the appearance of rendered surfaces without causing unnecessary damage.
Builders’ merchants, timber yards and trade suppliers present render cleaning around open storage, constant loading and a customer base arriving in vehicles from first light onwards. The buildings are typically a trade counter and showroom, offices, covered and open storage, a saw or cutting shed and welfare accommodation, with rendered elevations facing yards where forklifts, lorries and customer vehicles move continuously. Yard operation dominates the shape of the programme entirely. Exclusion zones, banksman cover, standing space and routes are agreed before mobilisation, and elevations are phased so no loading bay, racking run or collection point is obstructed for long. These sites open early, so treatment before opening or on a Sunday frequently works considerably better than a weekday would. Stored material is the other major consideration on these sites. Timber, sheet materials, blocks, aggregates in open bays, plasterboard and anything moisture-sensitive within reach of the working area are either relocated or comprehensively sheeted, and application stops in wind conditions that could carry solution across open racking. The soiling on these elevations is mixed: timber and aggregate dust, exhaust deposits and general yard grime alongside ordinary algae and lichen, so treatment has to address both the living growth and the bonded material together. Documentation is supplied with every quotation as standard, including risk assessments, method statements, COSHH data sheets and public liability certification. Branch and site managers responsible for premises in Leverington can arrange a survey covering every rendered elevation on the site, receive a written specification and a fixed price, and agree a phased programme built around trading and delivery hours.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
Whether your render has developed green algae, dark staining or general weathering, professional cleaning can make a significant difference to the appearance of your property. We take care to assess the condition and type of render before cleaning, helping us select an appropriate approach for the surface. This allows us to achieve thorough results while minimising the risk of damage to delicate or textured finishes.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
There is no fixed schedule as it depends on the property’s location, exposure and surrounding environment. Render that is shaded or surrounded by trees may require cleaning more frequently.
Yes. Professional render cleaning can remove algae and other organic growth that has developed across the surface.
The correct cleaning method should be selected based on the type and condition of the render. We assess the surface before cleaning to help ensure an appropriate approach is used.
Professional cleaning can significantly improve render affected by dirt, algae, organic growth and black staining. The final result can depend on the severity and age of the staining.
Yes. Render cleaning can be carried out on many types of residential and commercial properties, helping maintain a clean and professional exterior.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
