Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
How quickly render soils depends heavily on what surrounds a building, and two identical houses can need treating on very different cycles for that reason alone. Traffic is comfortably the biggest single factor in built-up positions. Exhaust deposits, brake dust and road film carry onto elevations facing a busy route, bond into texture and produce the flat grey appearance people mistake for fading. Walls facing away from the road on the same property are frequently noticeably cleaner. Agricultural activity produces a different load. Dust from cultivation and harvest, straw and chaff, and airborne organic material all settle on adjoining elevations, and organic debris feeds growth rather than simply dirtying a surface. Construction close by adds a short but intense period of dust and mortar splashing that bonds quickly to a textured surface and does not weather off easily afterwards. Industrial and processing operations contribute whatever they happen to emit, from fine particulate to greasy deposits that hold ordinary dirt against a wall. Vegetation is the last of them and by some distance the most common. Mature trees, hedgerows and dense planting supply a constant stream of spores, pollen, sap and leaf litter, and they shade walls so nothing dries properly. Treatment addresses both the organic growth and the bonded atmospheric material, since dealing with one alone leaves a wall that is either green or grey. Properties in March are assessed for what surrounds them as well as for what is on them, and the expected interval between treatments reflects the actual soiling load rather than a general figure.
A property treated three or four years ago is not quoted from the old file, and there is a good reason for surveying it again. Buildings change more than owners expect them to. Extensions get built, conservatories added, planting matures until it sits against a wall that was previously clear, trees grow and shade an elevation that used to dry quickly, rainwater goods develop leaks, and render cracks or blows in places that were sound at the last visit. Any of those changes the work, and several change what should be recommended. Growth changes over the years too, and not always for the worse. An elevation carrying mature lichen at the first treatment may now show only light algae, which means a lighter application, no second visit and a lower price than last time. Quoting from the previous figure would overcharge for exactly that. The survey record and photographs held from the earlier visit make the second survey quick to complete. The system is already identified, the access already understood, and comparison against the earlier images shows precisely how the property has behaved in the intervening period, which is genuinely useful information for setting the next interval. Nothing is charged for the visit, and there is no obligation attached to it at all, whatever the assessment concludes. Householders in March returning for a repeat treatment therefore receive a fresh written and fixed quotation reflecting the building as it is now, alongside an updated view of how long the next treatment should hold given how the last one actually performed.
The interval between treatments matters far more to lifetime cost than the price of any individual visit does, and that interval is set largely by what surrounds a building. A property on an open plot with no overhanging trees, away from heavy traffic and with rainwater goods running properly will commonly hold a full five years from a single treatment. On the standard semi-detached figure of £400 to £620, that annualises to roughly £80 to £125. The same house beneath mature trees, on a busy frontage, or with vegetation growing against the walls may need attention every three years. The same figure now annualises to £135 to £205, which is a real difference across a couple of decades. That is worth knowing because some of it is well within an owner’s control and some of it is not. Cutting planting back, keeping rainwater goods clear and keeping the base of elevations free of stored material all lengthen the interval measurably and cost nothing at all. Traffic and mature trees beyond a boundary generally do not. It also affects which approach is worth taking in the first place. Where a property will realistically need treating every three years, establishing a cycle and treating lightly each time works out cheaper and looks considerably better than allowing five or six years of growth and paying for a heavy clean with a second application. Households in March are given an honest expected interval at survey, based on the actual position of the building, so cost can be planned across years rather than guessed at.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular render cleaning.
Keep your property looking clean, fresh and well maintained with professional render cleaning in March. Over time, rendered walls can become affected by algae, moss, dirt, staining and other environmental contaminants, leaving the exterior looking tired and discoloured. Our professional render cleaning service is designed to safely restore the appearance of rendered surfaces without causing unnecessary damage.
Commercial laundries, dry cleaning plants and linen services present render cleaning around continuous operation and a great deal of external plant. These premises run long hours, frequently around the clock, with vehicle movement collecting and delivering throughout the day and night. The rendered elevations carry an unusual combination of soiling: organic growth as anywhere, plus the deposits associated with constant steam and warm moist air venting from the building, which keeps sections of wall permanently damp and encourages heavy colonisation directly around extract points. That is the defining feature of render cleaning on these premises. Walls near venting are often the worst on the site and will recolonise faster than anywhere else regardless of how well they are treated, so a realistic interval is set rather than an optimistic one. Planning on these sites centres on the external plant. Extraction, ventilation, boiler flues, condensers, tanks and any solvent handling or storage are identified and isolated before equipment is unloaded, with the operator confirming what may be affected. Application near active venting is timed for a shutdown period wherever one exists in the operating week. Yard and loading areas are phased so collections and deliveries continue uninterrupted, with exclusion zones agreed and supervised, and clean linen handling areas given particular protection. Pro Clean Xtreme issues documentation with every quotation: site-specific risk assessments, method statements, COSHH data sheets and public liability certification. Operations and site managers responsible for premises in March can arrange a survey covering every rendered elevation, a written specification, a fixed price and a phased programme built around production.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
Whether your render has developed green algae, dark staining or general weathering, professional cleaning can make a significant difference to the appearance of your property. We take care to assess the condition and type of render before cleaning, helping us select an appropriate approach for the surface. This allows us to achieve thorough results while minimising the risk of damage to delicate or textured finishes.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
There is no fixed schedule as it depends on the property’s location, exposure and surrounding environment. Render that is shaded or surrounded by trees may require cleaning more frequently.
Yes. Professional render cleaning can remove algae and other organic growth that has developed across the surface.
The correct cleaning method should be selected based on the type and condition of the render. We assess the surface before cleaning to help ensure an appropriate approach is used.
Professional cleaning can significantly improve render affected by dirt, algae, organic growth and black staining. The final result can depend on the severity and age of the staining.
Yes. Render cleaning can be carried out on many types of residential and commercial properties, helping maintain a clean and professional exterior.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
