Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
Render is a catch-all word for several very different coatings, and the correct cleaning approach changes with each one. Traditional sand-and-cement is porous, absorbent and often the most heavily colonised, holding moisture in its surface and supporting algae readily; it tolerates treatment well but needs generous coverage because so much solution soaks straight in. Pebbledash and roughcast present enormous surface area and countless sheltered pockets where growth takes hold, demanding patience rather than force to clear properly. Modern thin-coat systems behave differently again. Silicone render is water-repellent by design, so solution sits on the surface and works efficiently, but the finish is thin and its colour runs through the coating, meaning any abrasive method removes pigment permanently. Monocouche is a single-coat through-coloured render with a scraped texture that traps dirt in the grooves and lightens noticeably once cleaned. Acrylic and mineral finishes sit between the two, each with its own tolerance for wetting and dwell time. Establishing which system is in front of the crew is therefore the first task on any property, and it is done by inspection rather than assumption, since a rendered extension frequently uses a different system to the original house. Treatment strength, application rate and rinse method are then set accordingly. Across all of them the principle holds: a biocidal soft wash kills growth in place and lets it break down and weather off, rather than stripping the visible layer and leaving the surface open to rapid recolonisation. For homes in Stanground carrying a mix of original and newer rendered elevations, that adaptability is what produces an even finish across the whole property instead of a patchwork of differently treated walls.
Judgement of a contractor usually forms long before any work happens. The first call is answered by someone who knows the trade rather than a call centre, and straightforward questions get straightforward answers about method, timescales and what is realistic for a particular wall. A survey follows at a time that suits, and the quotation arrives in writing shortly afterwards, itemised, fixed and valid for a stated period. Booking is confirmed with a date rather than a vague fortnight. Crews arrive within the agreed window, in marked vehicles, and introduce themselves before anything is unloaded. If access needs arranging with someone next door, a gate unlocking or a vehicle moving, that is raised at survey rather than discovered on the morning of the work. On site, the property is treated as somebody’s home. Sheeting goes down before equipment comes out, planting is protected properly rather than hopefully, paving is washed down afterwards and nothing is left behind. Householders in Stanground who prefer to be out during the work can leave with confidence provided external water and access are available. Afterwards you get an honest account of what to expect: which staining has gone, which will continue clearing over the coming weeks as lichen dies back, and roughly when the elevation will need attention again. Aftercare advice covers keeping planting cut back from the wall and rainwater goods running freely. Complaints, on the rare occasions they arise, are dealt with directly by the person who ran the job. There is no escalation process to navigate and no argument about what was agreed, because the written quotation set it all out at the start.
Looking at render cleaning as an annual cost rather than a one-off invoice changes the picture considerably. A properly executed soft wash typically holds an elevation clear for three to five years, depending on shading, proximity to trees, prevailing damp and the porosity of the coating. Spread across that period, a £550 clean on a detached property works out at somewhere between £110 and £185 a year, which is modest for keeping the outside of a home presentable. Set against that, the cost of leaving render untreated is rarely zero. Growth holds moisture permanently against the coating, which accelerates hairline cracking, encourages frost damage in the surface and eventually contributes to sections blowing or delaminating. Recoating a render elevation runs into thousands and full replacement considerably more. Cleaning on a sensible cycle is the cheapest form of protection available for the coating. Indicative figures for one-off work: terraced homes from around £280 to £430, semi-detached from £400 to £620, detached from £550 to £880, with larger or three-storey properties quoted individually after survey. Rates generally settle between £4 and £8 per square metre. Households in Stanground who prefer to plan ahead can arrange treatment on a set cycle, which usually attracts a reduced rate because the elevation never becomes heavily colonised and each subsequent visit takes less time and less product. It also avoids the situation where a wall is left until growth is entrenched, at which point a single visit may not fully clear it and a second application becomes necessary. Every quotation is free, written and fixed once the survey is complete.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular render cleaning.
Keep your property looking clean, fresh and well maintained with professional render cleaning in Stanground. Over time, rendered walls can become affected by algae, moss, dirt, staining and other environmental contaminants, leaving the exterior looking tired and discoloured. Our professional render cleaning service is designed to safely restore the appearance of rendered surfaces without causing unnecessary damage.
Scale is the defining feature of commercial render cleaning. A three-storey office block, a warehouse gable or a run of apartment buildings presents wall area measured in thousands of square metres, much of it well beyond anything reachable from the ground, and the method has to be built around getting treatment onto that surface safely and evenly. Extended soft wash systems handle a great deal of it, delivering solution accurately to twenty metres and beyond from ground level without any equipment bearing on the building. Where structure, wind exposure or the need for close inspection make that impractical, mobile towers, scissor lifts and boom platforms are specified instead, with ground bearing capacity, overhead services and traffic routes assessed beforehand rather than on the day. Sequencing keeps sites operational. Elevations are treated one at a time so entrances, loading bays, fire routes and car parking are never all obstructed together, and works are phased across evenings, early mornings or weekends where daytime activity makes access impossible. Residents and staff are notified in advance where treatment will affect windows, parking or outdoor space. Property types regularly handled include office and business parks, industrial and distribution units, retail developments, hotels, care homes, schools, leisure facilities and managed residential blocks. Pro Clean Xtreme provides full risk assessments, method statements, COSHH documentation and insurance certification with every commercial instruction. Businesses and managing agents in Stanground can arrange a site survey and receive a written specification setting out elevations, access methods, programme and a fixed price. Portfolio agreements covering several buildings on a rolling cycle are available and generally price better than instructing each property separately as problems appear one by one.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
Whether your render has developed green algae, dark staining or general weathering, professional cleaning can make a significant difference to the appearance of your property. We take care to assess the condition and type of render before cleaning, helping us select an appropriate approach for the surface. This allows us to achieve thorough results while minimising the risk of damage to delicate or textured finishes.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
There is no fixed schedule as it depends on the property’s location, exposure and surrounding environment. Render that is shaded or surrounded by trees may require cleaning more frequently.
Yes. Professional render cleaning can remove algae and other organic growth that has developed across the surface.
The correct cleaning method should be selected based on the type and condition of the render. We assess the surface before cleaning to help ensure an appropriate approach is used.
Professional cleaning can significantly improve render affected by dirt, algae, organic growth and black staining. The final result can depend on the severity and age of the staining.
Yes. Render cleaning can be carried out on many types of residential and commercial properties, helping maintain a clean and professional exterior.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
