Services
Contact Us
Cavity wall insulation leaves permanent evidence on a rendered elevation, and it affects both the appearance of a treated wall and the way it is worked. The drill pattern is the obvious part. Injection holes are made at regular intervals across an elevation, typically in a grid, and each is made good afterwards with a small plug of mortar or filler. Beneath a uniform layer of growth none of that shows. Once the wall is clean, the pattern frequently becomes visible as a regular arrangement of slightly different-coloured discs. Colour match is the reason. A repair made in a small quantity of fresh material rarely matches a coating that has weathered for twenty years, and it weathers differently thereafter, so the difference persists rather than fading. Porosity differs too. Those plugs are frequently denser than the render around them, so they take up solution differently and can appear lighter or darker than the surrounding wall after treatment. None of that indicates a problem with the installation or with the treatment. It is simply repair work becoming visible once the growth disguising it has been removed. Treatment works the affected areas as part of the elevation but with the pattern recorded beforehand, so nobody is surprised by it afterwards. The same applies to any other retrofit work carried out through a render coat. Ventilation systems, cabling routes, alarm installations and heat pump pipework all involve penetrating a wall and making it good afterwards, and every one of those repairs becomes visible once the growth around it is gone. Properties in Whittlesford where cavity insulation has been installed are photographed at survey with the drill pattern noted, and the likely appearance of the finished wall described honestly rather than left to be discovered.
Recording small repairs before treating a wall is a routine part of every survey, and drill-hole patching is the commonest example on modern housing. What gets noted is the pattern itself, its extent across each elevation, how well the plugs match the surrounding render and whether any of them have shrunk, cracked or begun to fail. Each is photographed, because a regular grid of small discs appearing on a clean wall is exactly the kind of thing a customer reasonably queries afterwards, and a photograph taken beforehand settles it in seconds. Pro Clean Xtreme also checks whether any plug has failed, since a shrunken or missing one leaves an open route into a cavity and is worth reporting even though nothing about a clean addresses it. The same discipline covers every other small repair on a wall: filled fixing holes, made-good service entries, patched aerial and satellite mountings and anything else made good at some point by somebody. None of that work is carried out here and none of it is charged for as advice. What it achieves is a customer who knows in advance what the finished wall will look like, which is the difference between a good result and an unexpected one. Where a customer would rather the pattern were less visible, the honest answer is that treatment cannot help with it and that only recoating an elevation would, which is a decision for another trade entirely and a considerably larger expense. Everything found is held on file so the next survey starts from an accurate picture of the building rather than from a fresh inspection. Householders in Whittlesford receive a written record of every repair pattern found, with photographs, before any work is agreed or booked.
A wall carrying a great many small repairs is priced much like any other, and the differences are worth explaining since they are modest but real. Application takes slightly longer. Where plugs and patches differ in porosity from the render around them, an elevation is worked with a little more care and a slightly more generous pass, so nothing is over-wetted and nothing is left under-treated. Survey time is longer too, since recording a drill pattern, photographing it and checking whether any plug has failed adds a few minutes to each elevation. Neither is enough to move a property out of its band. Standard figures apply: £280 to £430 terraced, £400 to £620 semi-detached and £550 to £880 detached, at £4 to £8 per square metre. What can genuinely reduce a figure is a failing repair. Where a plug has shrunk or fallen out and the render around it is loose, that small area is excluded rather than treated, and the exclusion is named in the written scope. What never happens is a wall being priced higher because it carries visible repairs, since treating a patched elevation takes no more product than treating a plain one. Where a plug has failed and left an open route into a cavity, that is reported in writing regardless, since it matters a good deal more to the building than it does to the appearance of the wall. Nothing found during the work alters the agreed figure in any direction unless the scope itself changes. Properties in Whittlesford are quoted on area, grading, access and complexity as always, with any repair pattern recorded separately as information rather than as a cost.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular render cleaning.
Keep your property looking clean, fresh and well maintained with professional render cleaning in Whittlesford. Over time, rendered walls can become affected by algae, moss, dirt, staining and other environmental contaminants, leaving the exterior looking tired and discoloured. Our professional render cleaning service is designed to safely restore the appearance of rendered surfaces without causing unnecessary damage.
Classic vehicle restoration workshops and specialist automotive engineering premises present render cleaning around vehicles that are irreplaceable and finishes that are unforgiving. The buildings are usually a workshop and assembly area, a paint and preparation booth, a trim and upholstery shop, parts stores, a small showroom and secure storage, with rendered elevations facing a yard where vehicles are moved and stored. The vehicles are the entire difficulty. Cars part way through restoration are frequently in bare metal, primer or fresh paint, and anything reaching them is a genuine problem rather than an inconvenience. Everything within reach of a working area is relocated where the site can move it and comprehensively sheeted where it cannot, and application ceases in any wind at all that could carry solution across a yard. Paint operations impose their own controls. Booth intakes, extraction, drying and bake facilities are identified and isolated before equipment is unloaded, and no elevation adjoining a booth is treated while it is in use. Timing usually works best on a closed day or during a gap between projects, and these businesses are generally able to plan that well ahead. Documentation is issued with every quotation: risk assessments, method statements, COSHH data sheets and public liability certification. Parts and components stored outdoors need the same care as the vehicles themselves, since chrome, alloy castings and freshly plated fittings all mark readily and a restoration project frequently depends on parts that took months to find. Workshop owners and managers responsible for premises in Whittlesford can arrange a survey covering every rendered elevation, receive a written specification and a fixed price, and agree a programme built around the workshop schedule.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
Whether your render has developed green algae, dark staining or general weathering, professional cleaning can make a significant difference to the appearance of your property. We take care to assess the condition and type of render before cleaning, helping us select an appropriate approach for the surface. This allows us to achieve thorough results while minimising the risk of damage to delicate or textured finishes.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
There is no fixed schedule as it depends on the property’s location, exposure and surrounding environment. Render that is shaded or surrounded by trees may require cleaning more frequently.
Yes. Professional render cleaning can remove algae and other organic growth that has developed across the surface.
The correct cleaning method should be selected based on the type and condition of the render. We assess the surface before cleaning to help ensure an appropriate approach is used.
Professional cleaning can significantly improve render affected by dirt, algae, organic growth and black staining. The final result can depend on the severity and age of the staining.
Yes. Render cleaning can be carried out on many types of residential and commercial properties, helping maintain a clean and professional exterior.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.