Services
Contact Us
Rooflights installed into a domestic pitched roof change the way a covering needs to be cleaned, and they are frequently the first place a problem develops. Where a loft has been converted or a rooflight fitted into an existing slope, the unit sits within the covering with flashings and soakers dressed around it, and that junction interrupts the clean path water would otherwise take down the slope. Growth accumulates on the upslope side, where water and debris arriving from above are diverted around the frame and pause. A moss bed forming there sits directly against the flashing detail, holding moisture at the one point where the covering relies on a joint rather than an overlap. In time that is where water finds its way in, and the resulting damp usually appears on the reveal inside rather than anywhere obvious on the ceiling. The glass itself is a secondary consideration. Algal growth across a rooflight reduces the daylight the conversion was installed to provide, and on a shaded slope the difference over a few years is substantial. Cleaning takes account of all of it. Growth is removed by hand from the covering, from around the frame and flashings and from the upslope side where debris collects, working carefully so that dressed metalwork is not disturbed. The glass is cleared and treatment is then applied at low pressure across the covering. Homeowners in March with rooflights or a converted loft should make sure the quotation covers those junctions specifically, since they are the detail most often skipped and the one where neglect matters most.
Detail work around openings and junctions is where a roof clean is either done properly or hurried, and Pro Clean Xtreme prices for it rather than treating it as incidental. Rooflight surrounds, flashings, soakers, abutments where a lower roof meets a wall, and the upslope side of any interruption in the covering all collect debris and all require hand work at a slower pace than an open slope. The survey identifies each of these and records them, alongside covering type and age, growth depth and distribution, ridge and hip bedding, verge mortar, valley clearance and any slipped, cracked or lifting units. Where flashings are already loose or lifting, that is reported with photographs rather than worked around. The work follows a consistent method: protection of everything beneath the working elevations, access equipment chosen for the property, hand removal from ridge downward with tools matched to the covering, careful clearing around frames and dressed metalwork so nothing is disturbed, valleys cleared along their full run, then full-coverage low-pressure treatment across every elevation. No high-pressure equipment is used on residential coverings, which matters particularly around flashings where forced water travels straight into the joint. Operatives are height trained and covered by full public liability and employers’ liability insurance, waste is bagged and removed, hard surfaces are rinsed, and each elevation is photographed before and after. Customers in March receive a fixed written quotation with the scope and guarantee period stated, no deposit requested and payment falling due on completion once the work has been inspected. Where a rooflight or flashing detail needs particular care, it is discussed at survey rather than dealt with silently on the day.
Interruptions in a covering have a disproportionate effect on roof cleaning cost, and rooflights are a good example of why. An open slope is cleaned at a steady rate. Every opening within it introduces a perimeter that has to be worked by hand at close quarters, an upslope side where debris has collected, and dressed metalwork that must not be disturbed. A slope with three rooflights therefore takes noticeably longer than an identical slope with none. The same applies to other interruptions: dormers, abutments where a lower roof meets a wall, soil vent terminals, and any junction where two elements of the covering meet. Each is a small separate task requiring more care and less speed than the open field of tiles around it. Alongside those, the usual variables apply: true area with the pitch accounted for, growth depth and distribution across each elevation, the covering material, and the access arrangements each elevation requires. A slope broken up by several openings is genuinely slower to work than an uninterrupted one of the same size, and the quotation should reflect that rather than averaging it away. Quotations are fixed and written, issued after a physical survey with the scope, roof areas and guarantee period stated. No deposit is requested, nothing is added while work is under way, and payment falls due on completion. Property owners in March should check that a quotation actually mentions these details rather than describing the roof in general terms. Where a figure has been given without a proper look at the slope, the openings and junctions are exactly what has not been allowed for, and they are the parts of the covering where neglected growth causes the most trouble.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular roof cleaning.
Commercial roof cleaning at garden centres and retail nursery premises has a seasonal logic to it, since these are businesses whose trading year is heavily concentrated and whose buildings are unusually varied. Retail glasshouses and covered sales areas, canopied outdoor displays, café and restaurant buildings, storage and potting sheds and staff facilities all sit on one site with different coverings and different drainage. Growth on these sites is typically heavy. Irrigation, high humidity, extensive planting and continuous organic deposit combine to give roofs conditions that few commercial sites match, and shaded canopy structures under mature trees are usually the worst affected. Work covers each roof appropriately: hand removal and a treatment specification suited to tiled or slated sections, a low-pressure approach matched to the coating on sheeted buildings and canopies, and thorough clearing of gutter runs and outlets throughout so drainage capacity is restored. Where stock and planting sit beneath a working area, containment and protection are arranged before anything begins, with treatment applied directly to the covering rather than broadcast. Scheduling is arranged around the trading calendar, using the quieter winter period wherever possible, with exclusion zones and pedestrian routes agreed so customers are unaffected where work must take place during opening hours. Site-specific risk assessments, method statements, insurance and competence records are supplied before mobilisation, with fall protection confirmed at survey and access equipment priced openly. For centre managers in March, dealing with every building in one planned off-season programme is considerably more efficient than tackling them individually, and it means the whole site presents properly when the busiest weeks arrive.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have built a strong reputation across March for dependable, high-quality roof cleaning services. We take a personal and transparent approach to every project, while continually investing in professional low-pressure steam cleaning equipment and effective safety systems. From domestic properties to larger commercial roofs, our experienced team focuses on achieving thorough results while helping protect the condition of your roof. Fully insured and committed to reliable workmanship, we deliver a professional roof cleaning service from start to finish.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our roof cleaning services. If you have a question about your property, a specific cleaning requirement, or need further information about our services, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution.
The ideal frequency depends on the condition of your roof and how quickly moss, algae, dirt and other organic growth build up. Regular roof cleaning can help keep your roof looking well maintained and prevent heavy buildup.
Professional roof cleaning can help remove moss, algae, lichen, dirt, grime and other organic growth from your roof. The appropriate cleaning method will depend on the roofing material and its condition.
When carried out correctly, professional roof cleaning can be performed safely using suitable equipment and techniques. Care should be taken to use an appropriate method for the specific roof material.
Yes, roof cleaning can effectively remove moss and other organic growth from roofing surfaces. The treatment used will depend on the amount of moss present and the type of roof.
The time required depends on the size and condition of the roof, the amount of moss and dirt present, and the cleaning method required. A professional assessment can provide a better idea of the expected timeframe.
Yes. Removing moss, algae, dirt and weather-related staining can significantly improve the appearance of a tired or heavily weathered roof, helping the property look cleaner and better maintained.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.