Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
Most owners have never seen their own array at close range, which is why the condition of a neglected system tends to surprise them when photographs arrive. From the ground, ten years of accumulation looks like nothing much — perhaps a slight dulling, perhaps nothing at all. Close up it is a different picture. The open glass carries a consolidated film of mineral particulate bound together by pollen and combustion residue, thick enough to mark a finger and unmoved by a decade of rainfall. The lower few centimetres of each module hold a packed band of grit, seed fragments and broken-down organic matter, wedged behind the lip of the aluminium frame. Along that same margin sits a continuous green stain of algae, and in the corners, where water sits longest, hard grey lichen anchored into the frame junction. None of that is unusual and none of it is the owner’s fault; it is simply what happens to an outdoor surface left alone. Removing it is unhurried work. Purified water — filtered and passed through deionising resin so it carries effectively no dissolved solids — wets the surface and is given time to soften what has bonded. A soft filament brush on a telescopic pole then works the film and the frame line, repeating where material has not lifted, and a final rinse leaves the glass to dry clear. Nothing abrasive touches the coating, no detergent is used, pressure stays low and away from seals and junction boxes, and no weight goes onto a module. First cleans on older systems in Bluntisham usually produce the most dramatic solar panel cleaning results of any job.
Pro Clean Xtreme sends photographs from every visit because the alternative is asking somebody to take a result on trust for a surface they will never see. Images taken close enough to show the frame line and the lower edges tell an owner exactly what was there beforehand and exactly what is left afterwards, which is a more useful record than any assurance. That transparency shapes the work itself. Every module is covered across its full face, the frame line and lower edges are treated as part of the job rather than skipped, and bonded material is given dwell time rather than being forced. Where a second pass is needed it happens, and where a decade of anchored growth genuinely will not clear in one visit, that is said beforehand rather than explained afterwards. The technical standards are fixed. Water purified through filtration and deionising resin, never drawn from a tap. Soft filament brush heads. Low pressure throughout, with nothing directed at frame seals, flashings or junction boxes. No operative putting weight on a module at any point, since the microcracking that causes is permanent and invisible. Public liability insurance and a risk assessment matched to the actual height and configuration sit behind every job, and visits are rescheduled rather than forced when wind or frost makes a long pole unsafe. Residents in Bluntisham searching solar panel cleaning near me are generally choosing somebody to look after an installation for years, and evidence is the simplest basis for that. It also settles any question about what was there beforehand, which matters most on a first visit to a system nobody has ever looked at closely.
Advertised headline rates are a poor guide on any array and a particularly poor one on a system that has been left for years. A figure published as a price per panel assumes an average installation at an average height in average condition, and a neglected array is none of those things. The figure that matters is the one produced after somebody has looked at the actual glass. That assessment establishes four things. Module count, charged per panel with the rate improving as arrays grow, because travel, unloading, assembling poles and producing purified water are fixed costs incurred once regardless of how much glass follows. Reach, which decides the method and the working time, with firm level standing and clear room to extend a pole costing least. Whether hired access equipment is genuinely necessary, in which case it appears as a separate stated item rather than inflating the rate. And condition, which on a long-neglected system is the largest variable of the four. A minimum charge sits underneath, covering the fixed portion of any visit regardless of how many modules follow it. Assessments for properties in Bluntisham are free and carry no obligation, and the resulting quote holds on the day rather than moving once the work begins. It covers the complete array including frames and lower edges, purified water throughout and photographs afterwards. Repeat bookings sit below one-off rates, since a maintained system needs less work at every subsequent visit. The gap between a first clean and the ones that follow is usually substantial on a neglected array, and it is explained at the assessment rather than discovered on the invoice.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular solar panel cleaning.
Professional solar panel cleaning in Bluntisham offers a simple and effective way to maintain the cleanliness, appearance and performance of your solar panels. Over time, dirt, dust, bird droppings, pollen, leaves, algae and other environmental debris can accumulate across the surface of solar panels, leaving them looking dirty and potentially reducing the amount of sunlight reaching the panels. Regular solar panel cleaning helps remove this unwanted build-up, keeping the panels cleaner and allowing them to receive as much available sunlight as possible. Keeping solar panels clean can also support ongoing maintenance by making it easier to identify visible issues, damage or areas that may require further attention. Professionally cleaned solar panels can improve the overall appearance of your property while helping you get the most from your solar installation. Using suitable cleaning methods and equipment for solar panel surfaces is important to achieve effective results while reducing the risk of scratching, marking or damaging the panels. Whether your solar panels have accumulated bird mess, dust, dirt, pollen, algae or general environmental grime, professional solar panel cleaning in Bluntisham can help keep them cleaner, clearer and better maintained throughout the year.
Surveying an installation that has never been cleaned produces more information than the quote strictly requires, and most operators find the extra useful. Walking the array at close range establishes the depth and distribution of soiling, which rows carry the heaviest fouling and why, whether growth has anchored at the frame junctions, and whether debris has accumulated at the lower rails to the point of holding moisture against edge seals. It also picks up things worth knowing regardless of cleaning: slipped clamps, cabling chafing against rails, visibly damaged modules and mounting fixings that have worked loose. None of that is an inspection in any formal sense, but it is reported rather than ignored. From the survey comes the rest. Module count, mounting arrangement, structural condition and fragility, edge protection and the safest route to every row are all established, producing a site-specific risk assessment and method statement agreed with the responsible person before dates are confirmed. Ground-level pole work is used where reach permits, with mobile elevating work platforms or rope access where it does not and operatives qualified for the method. The clean itself uses purified water from tanks brought to site, soft brushes and low pressure, with heavily fouled sections given dwell time and worked repeatedly rather than forced, frames and lower edges included, and no chemicals entering drainage. Dated photographs and a written completion record follow the visit. Operators around Bluntisham commissioning commercial solar panel cleaning for the first time generally find the survey alone answers questions they had not thought to ask, particularly about the condition of the lower rails.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have developed a trusted reputation across Bluntisham for reliable, professional solar panel cleaning. We combine years of experience with specialist cleaning equipment and careful working practices to provide a thorough service for residential and commercial solar installations. Our approach is straightforward and transparent, with every job completed with attention to detail and the condition of the panels in mind. From removing built-up dirt and bird deposits to clearing pollen, dust and other surface debris, we work carefully to leave solar panels clean and clear. Fully insured and committed to high standards of workmanship, we provide a dependable solar panel cleaning service from initial assessment through to completion.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our solar panel cleaning services. If you have a question about your solar panels, a specific cleaning requirement, or need further information about our service, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution for keeping your solar panels clean and well maintained.
The ideal frequency depends on your location, surroundings and how quickly dirt and debris build up. For many properties, an annual clean can help keep panels clear and well maintained.
Yes, keeping panels free from dirt, bird droppings, dust, pollen and other debris allows more sunlight to reach the surface. Cleaning can therefore help your panels operate as efficiently as possible.
Solar panels can collect bird droppings, dust, pollen, leaves, algae, grime and other environmental debris. These deposits can build up over time and affect the cleanliness of the panel surface.
Yes. Professional solar panel cleaning can be carried out on a wide range of domestic and commercial properties, subject to suitable access and safe working conditions.
Professional solar panel cleaning should be carried out using appropriate equipment and techniques designed for solar panel surfaces. Careful cleaning helps remove deposits without unnecessarily damaging or scratching the panels.
Rain can wash away some loose dirt, but it does not necessarily remove stubborn bird droppings, pollen, grime and other deposits. Regular professional cleaning can provide a more thorough clean than rainfall alone.
Yes, we provide professional solar panel cleaning in Bluntisham, helping domestic and commercial customers keep their solar panels clean, clear and properly maintained.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
