Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
No single factor takes much from a photovoltaic system, which is precisely why the total is easy to miss. Cell degradation removes a fraction of a per cent each year and is accounted for in the performance warranty. Cable and inverter losses account for a few per cent and are designed in. Temperature reduces output whenever modules run hot, which on a bright summer day is most of the time. Partial shading from a chimney, an aerial or a maturing tree costs whatever it costs. Soiling sits on top of all of it, and it is the only element in the stack that is fully recoverable. A film across the glass reduces what reaches the cells before any of the other losses even apply, so it compounds with everything else rather than replacing it. That compounding is why the cumulative effect of a neglected array is larger than owners expect. Each individual factor sounds trivial; together they explain a system producing meaningfully less than the figure on its original estimate. Removing the recoverable part is straightforward. Purified water, filtered and passed through deionising resin until it carries effectively no dissolved solids, is applied at low pressure through a soft filament brush on a telescopic pole. Bonded material is wetted and given time to soften, the frame line and lower edges are cleared specifically, and the glass is rinsed and left to dry clear without towelling. Nothing abrasive touches the anti-reflective coating, no detergent is used, nothing is directed at frame seals or junction boxes, and no weight goes onto a module. For owners in Burwell, solar panel cleaning is the one item in that list they can do something about.
Pro Clean Xtreme is careful not to claim credit for more than cleaning actually delivers, which matters when an owner is trying to work out why a system is underperforming. A clean removes the soiling component and nothing else. Degradation stays. Cable and inverter losses stay. Shading from a structure or a mature tree stays, though the growth that shading encourages does not. Temperature effects stay. Saying so plainly at the assessment sets a realistic expectation and makes the result afterwards easier to interpret. Where the pattern of a system’s output suggests something other than soiling — an abrupt drop rather than a gradual decline, or a whole section contributing nothing — that is said rather than glossed over, and a qualified installer is the sensible next call. The work itself is fixed. Purified water produced through filtration and deionising resin, never taken from a tap. Soft filament brush heads with cushioned bumpers. Low pressure throughout, with nothing directed at frame seals, flashings, drainage openings or junction boxes. No operative putting weight on a module at any point, since the resulting microcracking is permanent and never becomes visible. Full coverage of every panel including the frame line and lower edges. Public liability insurance and a risk assessment matched to the actual height and configuration sit behind every visit, and work is rescheduled rather than forced when conditions make a long pole unsafe. Householders in Burwell searching solar panel cleaning near me are generally better served by an accurate account than an enthusiastic one, since the accurate one is the version that still makes sense a year later.
Among the losses affecting a photovoltaic system, soiling is the only one with an inexpensive fix, which is what makes cleaning worth arranging even when the individual percentage sounds small. Degradation cannot be bought back. Cable and inverter losses are a design characteristic. Shading is removed by altering something structural or a mature tree, neither of which is cheap. Temperature effects are inherent. Soiling costs a couple of hours of somebody’s time once or twice a year. That figure is built from module count, charged per panel with the rate improving as arrays grow. Travel, unloading, assembling poles and producing purified water are fixed costs incurred once regardless of how much glass follows them, so that portion spreads further across a larger system — which is also why a minimum charge applies and why a very small array never costs proportionally little. Reach adjusts it next. An accessible elevation with firm level standing and clear room to extend a pole is the least expensive arrangement, while unusual height, restricted ground and obstructions between the operative and the wall all lengthen the work. Where hired access equipment is genuinely required it appears as a separate stated item rather than being folded quietly into the rate. Condition supplies the third input, since consolidated film and established growth come away with dwell time and repeated gentle passes rather than force. Assessments for properties in Burwell are free and carry no obligation, the resulting quote holds on the day, and repeat bookings sit below one-off rates. The price covers the complete array including frames and lower edges, purified water throughout and photographs afterwards.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular solar panel cleaning.
Professional solar panel cleaning in Burwell offers a simple and effective way to maintain the cleanliness, appearance and performance of your solar panels. Over time, dirt, dust, bird droppings, pollen, leaves, algae and other environmental debris can accumulate across the surface of solar panels, leaving them looking dirty and potentially reducing the amount of sunlight reaching the panels. Regular solar panel cleaning helps remove this unwanted build-up, keeping the panels cleaner and allowing them to receive as much available sunlight as possible. Keeping solar panels clean can also support ongoing maintenance by making it easier to identify visible issues, damage or areas that may require further attention. Professionally cleaned solar panels can improve the overall appearance of your property while helping you get the most from your solar installation. Using suitable cleaning methods and equipment for solar panel surfaces is important to achieve effective results while reducing the risk of scratching, marking or damaging the panels. Whether your solar panels have accumulated bird mess, dust, dirt, pollen, algae or general environmental grime, professional solar panel cleaning in Burwell can help keep them cleaner, clearer and better maintained throughout the year.
On a commercial installation the loss stack is modelled explicitly, which makes soiling easier to isolate and harder to ignore. Yield forecasts allow for degradation, temperature coefficients, cable and inverter losses and a shading factor. What they usually assume is a clean array operating at its rated conversion figure, with a nominal soiling allowance that bears little relation to a system nobody has touched in five years. The gap between forecast and meter therefore contains a recoverable element that nothing else in the model accounts for, and cleaning is the only way to quantify it. Output compared either side of a visit, normalised against irradiance, gives a figure for exactly that component. Delivery is surveyed and documented in advance. Module count, mounting arrangement, structural condition and fragility, edge protection and the safest route to every row are established, producing a site-specific risk assessment and method statement agreed with the responsible person before dates are confirmed. Ground-level pole work is used where reach permits, with mobile elevating work platforms or rope access where it does not and operatives qualified for the method. Purified water is supplied from tanks brought to site, applied at low pressure through soft brushes, with frames and lower edges cleaned alongside the glass and no chemicals entering drainage. Attendance is arranged around the operation, including weekends and out-of-hours. Dated photographs and a written completion record follow every visit, and operators around Burwell reconciling forecast against actual output generally start with commercial solar panel cleaning, since it isolates the one variable the model cannot account for and costs least to test.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have developed a trusted reputation across Burwell for reliable, professional solar panel cleaning. We combine years of experience with specialist cleaning equipment and careful working practices to provide a thorough service for residential and commercial solar installations. Our approach is straightforward and transparent, with every job completed with attention to detail and the condition of the panels in mind. From removing built-up dirt and bird deposits to clearing pollen, dust and other surface debris, we work carefully to leave solar panels clean and clear. Fully insured and committed to high standards of workmanship, we provide a dependable solar panel cleaning service from initial assessment through to completion.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our solar panel cleaning services. If you have a question about your solar panels, a specific cleaning requirement, or need further information about our service, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution for keeping your solar panels clean and well maintained.
The ideal frequency depends on your location, surroundings and how quickly dirt and debris build up. For many properties, an annual clean can help keep panels clear and well maintained.
Yes, keeping panels free from dirt, bird droppings, dust, pollen and other debris allows more sunlight to reach the surface. Cleaning can therefore help your panels operate as efficiently as possible.
Solar panels can collect bird droppings, dust, pollen, leaves, algae, grime and other environmental debris. These deposits can build up over time and affect the cleanliness of the panel surface.
Yes. Professional solar panel cleaning can be carried out on a wide range of domestic and commercial properties, subject to suitable access and safe working conditions.
Professional solar panel cleaning should be carried out using appropriate equipment and techniques designed for solar panel surfaces. Careful cleaning helps remove deposits without unnecessarily damaging or scratching the panels.
Rain can wash away some loose dirt, but it does not necessarily remove stubborn bird droppings, pollen, grime and other deposits. Regular professional cleaning can provide a more thorough clean than rainfall alone.
Yes, we provide professional solar panel cleaning in Burwell, helping domestic and commercial customers keep their solar panels clean, clear and properly maintained.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
