Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
The days immediately after a clean are the ones most likely to mislead an owner, and it is worth knowing what to look at and what to ignore. The temptation is to compare the week after against the week before. That tells you almost nothing, because irradiance varies far more between two weeks than cleaning does. A dull week following a bright one will show a fall in output on a system that has just been improved, and a bright week following a dull one will suggest a transformation that was mostly weather. The comparison that works is the same calendar period across different years. June against June, with no change in shading, isolates the difference reasonably well. Where the monitoring reports irradiance alongside generation, output measured against it is better still, since the weather is normalised out directly. Either way, a few weeks of data is more useful than a few days. There is also a visual check that requires no data at all. Photographs taken before and after, close enough to show the frame line and the lower edges, establish what was physically removed — which on a neglected array is frequently more persuasive than any figure. The work producing that is unremarkable. Purified water, filtered and passed through deionising resin until it carries effectively no dissolved solids, applied at low pressure through a soft filament brush, with bonded material given dwell, the frame line cleared specifically and the glass left to dry clear. Owners in Caxton should give solar panel cleaning a month before judging it on the figures.
A contractor confident in the method has no reason to discourage an owner from checking, and every reason to explain how to do it properly. That means suggesting the right comparison rather than the flattering one. Same period, different years. Output against irradiance where the monitoring provides it. A few weeks rather than a few days. Where the array reports at string or module level, the effect on particular rows is visible directly and is usually the clearest evidence available. It also means not quoting a percentage in advance. Soiling losses vary with pitch, orientation, exposure and how long an array has been left, and any specific figure offered before somebody has seen the glass is invention. The work behind it is fixed. Purified water produced through filtration and deionising resin, never taken from a tap. Soft filament brush heads with cushioned bumpers. Low pressure throughout, with nothing directed at frame seals, flashings, drainage openings or junction boxes. No operative putting weight on a module at any point, since the resulting microcracking is permanent and never becomes visible. Full coverage of every panel including the frame line and lower edges. Public liability insurance and a risk assessment matched to the actual height and configuration sit behind every visit, and photographs follow afterwards. Householders in Caxton comparing solar panel cleaning services should favour whoever explains how the result can be measured. A firm confident in its method has nothing to lose by inviting the comparison, and a great deal to gain from a customer who can see what they paid for.
Once an owner has one cycle of data, the cost question becomes a calculation rather than a judgement, and the interval can be set on evidence. The arithmetic is simple. Take the annual generation, apply the recovered proportion the data showed, and value it at whatever the electricity is worth — imported units where generation is consumed on site, or the export rate where it is not. Set that against the cost of a visit, and against how quickly the figure drifts back afterwards, and the right frequency becomes fairly obvious. The visit itself is priced from module count, charged per panel with the rate improving as arrays grow. Travel, unloading, assembling poles and producing purified water are fixed costs incurred once regardless of how much glass follows them, so that portion spreads further across a larger system — which is why a minimum charge applies and why a very small array never costs proportionally little. Reach adjusts it next, with firm level standing and clear room to extend a pole costing least, and unusual height, restricted ground or a genuine requirement for hired access equipment costing more and stated separately. Condition supplies the third, since consolidated film and established growth come away with dwell time and repeated gentle passes rather than force. Assessments for properties in Caxton are free and carry no obligation, the resulting quote holds on the day, and repeat bookings sit below one-off rates. The price covers the complete array including frames and lower edges, purified water throughout and photographs afterwards, taken close enough to be useful.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular solar panel cleaning.
Professional solar panel cleaning in Caxton offers a simple and effective way to maintain the cleanliness, appearance and performance of your solar panels. Over time, dirt, dust, bird droppings, pollen, leaves, algae and other environmental debris can accumulate across the surface of solar panels, leaving them looking dirty and potentially reducing the amount of sunlight reaching the panels. Regular solar panel cleaning helps remove this unwanted build-up, keeping the panels cleaner and allowing them to receive as much available sunlight as possible. Keeping solar panels clean can also support ongoing maintenance by making it easier to identify visible issues, damage or areas that may require further attention. Professionally cleaned solar panels can improve the overall appearance of your property while helping you get the most from your solar installation. Using suitable cleaning methods and equipment for solar panel surfaces is important to achieve effective results while reducing the risk of scratching, marking or damaging the panels. Whether your solar panels have accumulated bird mess, dust, dirt, pollen, algae or general environmental grime, professional solar panel cleaning in Caxton can help keep them cleaner, clearer and better maintained throughout the year.
Commercial monitoring produces enough data to answer the question properly, and the analysis is worth doing once rather than arguing about repeatedly. Output either side of a clean, normalised against irradiance, quantifies what was recovered. Tracking the figure over the following months establishes how quickly the installation fouls. Between them those two numbers set the interval on measurement rather than on a general recommendation, and they make the line straightforward to defend in a budget. Where module-level electronics are fitted, the analysis is sharper still, since the effect can be attributed to specific rows rather than inferred from a site total. Pro Clean Xtreme supports that with a record from every attendance: dated photographs taken row by row and a written completion note describing what was done and anything observed. Across successive cycles that record and the generation data together give a clear and defensible account of how the asset is actually behaving. Delivery is surveyed and documented in advance. Module count, mounting arrangement, structural condition and fragility, edge protection and the safest route to every row are established, producing a site-specific risk assessment and method statement agreed before dates are confirmed. Purified water is supplied from tanks brought to site, applied at low pressure through soft brushes, with frames and lower edges included and no chemicals entering drainage. Operators around Caxton running commercial solar panel cleaning should plan to review the figures annually rather than fixing the interval permanently, since a site’s soiling rate changes as operations, adjacent activity and the general surroundings change around it across the years of ownership.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have developed a trusted reputation across Caxton for reliable, professional solar panel cleaning. We combine years of experience with specialist cleaning equipment and careful working practices to provide a thorough service for residential and commercial solar installations. Our approach is straightforward and transparent, with every job completed with attention to detail and the condition of the panels in mind. From removing built-up dirt and bird deposits to clearing pollen, dust and other surface debris, we work carefully to leave solar panels clean and clear. Fully insured and committed to high standards of workmanship, we provide a dependable solar panel cleaning service from initial assessment through to completion.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our solar panel cleaning services. If you have a question about your solar panels, a specific cleaning requirement, or need further information about our service, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution for keeping your solar panels clean and well maintained.
The ideal frequency depends on your location, surroundings and how quickly dirt and debris build up. For many properties, an annual clean can help keep panels clear and well maintained.
Yes, keeping panels free from dirt, bird droppings, dust, pollen and other debris allows more sunlight to reach the surface. Cleaning can therefore help your panels operate as efficiently as possible.
Solar panels can collect bird droppings, dust, pollen, leaves, algae, grime and other environmental debris. These deposits can build up over time and affect the cleanliness of the panel surface.
Yes. Professional solar panel cleaning can be carried out on a wide range of domestic and commercial properties, subject to suitable access and safe working conditions.
Professional solar panel cleaning should be carried out using appropriate equipment and techniques designed for solar panel surfaces. Careful cleaning helps remove deposits without unnecessarily damaging or scratching the panels.
Rain can wash away some loose dirt, but it does not necessarily remove stubborn bird droppings, pollen, grime and other deposits. Regular professional cleaning can provide a more thorough clean than rainfall alone.
Yes, we provide professional solar panel cleaning in Caxton, helping domestic and commercial customers keep their solar panels clean, clear and properly maintained.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
