Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
A reasonable question after a clean is where all the removed material actually goes, and the answer explains why the array does not simply refoul the following week. Soiling lifted from the glass leaves in the water. Purified water dissolves and suspends the film, and the rinse carries it down the face of the modules, off the lower frame and away — onto the covering below, down the wall and into the ground or the drainage. Because the water carries no dissolved minerals of its own, nothing is deposited in the process and nothing dries back onto the surface. That last point is the important one. A clean carried out with mains water leaves mineral deposit behind as the surface evaporates, so the array starts collecting its next layer on a surface that is already slightly rough and slightly contaminated. A clean carried out with purified water leaves genuinely bare glass, and re-soiling begins from nothing. Material running off is water and dissolved soiling, so planting beneath is unaffected, drainage takes nothing it should not, and there is no residue to contain or dispose of. The rest of the method follows from the same logic. Soft filament brushes rather than anything abrasive, low pressure rather than force, nothing directed at frame seals or junction boxes, and no weight on the modules. Owners in Great Shelford who have had solar panel cleaning carried out properly generally find the result holds noticeably longer than a rinse would. That is the practical argument for purified water rather than a hosepipe, and it is visible in how long the result holds afterwards.
The reason no detergent is used is worth stating, because it is the opposite of what most people assume about cleaning anything. Purified water lifts soiling on its own. Stripped of dissolved solids through filtration and deionising resin, it behaves as an active solvent, pulling material into solution rather than running over it, and it evaporates leaving nothing behind. A detergent adds cleaning power that is not needed and leaves a surfactant film on a surface engineered for optical performance — which then attracts the next layer of dust faster than bare glass would. So the array is left worse off in the medium term by something that made the morning slightly easier. The rest of the standard follows. Soft filament brush heads with cushioned bumpers. Low pressure throughout, with nothing directed at frame seals, flashings, drainage openings or junction boxes. No operative putting weight on a module at any point, since the resulting microcracking is permanent and never becomes visible. Full coverage of every panel including the frame line and lower edges rather than only the glass that shows from the ground. Public liability insurance and a risk assessment matched to the actual height and configuration sit behind every visit, and photographs follow afterwards. Residents in Great Shelford comparing solar panel cleaning services should ask what is being added to the water, and be reassured to hear that nothing is. Public liability insurance and a risk assessment matched to the actual height and configuration sit behind every visit, and work is rescheduled rather than forced when conditions make a long pole unsafe.
A clean that holds longer is worth more than one that looks equally good on the day, and that is a real difference between methods rather than a marketing distinction. An array rinsed with mains water carries mineral deposit from the moment it dries, and the next layer of dust binds to it readily. One finished with purified water starts from bare glass, so the interval before it needs attention again is genuinely longer. The figure for the visit is built from module count, charged per panel with the rate improving as arrays grow. Travel, unloading, assembling poles and producing purified water are fixed costs incurred once regardless of how much glass follows them, so that portion spreads further across a larger system — which is why a minimum charge applies and why a very small array never costs proportionally little. Reach adjusts it next, with firm level standing and clear room to extend a pole costing least, and unusual height, restricted ground or a genuine requirement for hired access equipment costing more and stated separately. Condition supplies the third, since consolidated film and established growth come away with dwell time and repeated gentle passes rather than force. Assessments for properties in Great Shelford are free and carry no obligation, the resulting quote holds on the day, and repeat bookings sit below one-off rates. The price covers the complete array including frames and lower edges, with photographs afterwards. Where an array does not yet warrant a visit, that is the answer given rather than a figure being quoted. Repeat bookings sit below one-off rates, since a maintained array takes less time at every visit.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular solar panel cleaning.
Professional solar panel cleaning in Great Shelford offers a simple and effective way to maintain the cleanliness, appearance and performance of your solar panels. Over time, dirt, dust, bird droppings, pollen, leaves, algae and other environmental debris can accumulate across the surface of solar panels, leaving them looking dirty and potentially reducing the amount of sunlight reaching the panels. Regular solar panel cleaning helps remove this unwanted build-up, keeping the panels cleaner and allowing them to receive as much available sunlight as possible. Keeping solar panels clean can also support ongoing maintenance by making it easier to identify visible issues, damage or areas that may require further attention. Professionally cleaned solar panels can improve the overall appearance of your property while helping you get the most from your solar installation. Using suitable cleaning methods and equipment for solar panel surfaces is important to achieve effective results while reducing the risk of scratching, marking or damaging the panels. Whether your solar panels have accumulated bird mess, dust, dirt, pollen, algae or general environmental grime, professional solar panel cleaning in Great Shelford can help keep them cleaner, clearer and better maintained throughout the year.
Runoff is a live question on commercial sites, and cleaning that introduces nothing is considerably simpler to accommodate than cleaning that does. Pro Clean Xtreme uses purified water and nothing else. There is no detergent, solvent or biocide at any stage, so material leaving an array is water and dissolved soiling — nothing to record on a register, nothing requiring containment, no interceptor concern and nothing that could reach a watercourse through surface drainage. Water is supplied from tanks brought to site, which also means nothing draws on the client’s own connection and no allowance has to be made for the volumes a large installation requires. The rest of the delivery is standard. A survey establishes module count, mounting arrangement, structural condition and fragility, edge protection and the safest route to every row, producing a site-specific risk assessment and method statement agreed with the responsible person before dates are confirmed. Ground-level pole work is used where reach permits, with mobile elevating work platforms or rope access where it does not and operatives qualified for the method. Soft brushes, low pressure, frames and lower edges included alongside the glass. Attendance is arranged around the operation, including weekends and out-of-hours. Dated photographs and a written completion record follow every visit, and operators around Great Shelford generally find commercial solar panel cleaning one of the few maintenance activities that raises no environmental questions at all. Attendance is arranged around the operation, including weekends and out-of-hours, with large arrays phased where continuous access is impractical. Purified water is supplied ready for use, so nothing draws on the client connection.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have developed a trusted reputation across Great Shelford for reliable, professional solar panel cleaning. We combine years of experience with specialist cleaning equipment and careful working practices to provide a thorough service for residential and commercial solar installations. Our approach is straightforward and transparent, with every job completed with attention to detail and the condition of the panels in mind. From removing built-up dirt and bird deposits to clearing pollen, dust and other surface debris, we work carefully to leave solar panels clean and clear. Fully insured and committed to high standards of workmanship, we provide a dependable solar panel cleaning service from initial assessment through to completion.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our solar panel cleaning services. If you have a question about your solar panels, a specific cleaning requirement, or need further information about our service, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution for keeping your solar panels clean and well maintained.
The ideal frequency depends on your location, surroundings and how quickly dirt and debris build up. For many properties, an annual clean can help keep panels clear and well maintained.
Yes, keeping panels free from dirt, bird droppings, dust, pollen and other debris allows more sunlight to reach the surface. Cleaning can therefore help your panels operate as efficiently as possible.
Solar panels can collect bird droppings, dust, pollen, leaves, algae, grime and other environmental debris. These deposits can build up over time and affect the cleanliness of the panel surface.
Yes. Professional solar panel cleaning can be carried out on a wide range of domestic and commercial properties, subject to suitable access and safe working conditions.
Professional solar panel cleaning should be carried out using appropriate equipment and techniques designed for solar panel surfaces. Careful cleaning helps remove deposits without unnecessarily damaging or scratching the panels.
Rain can wash away some loose dirt, but it does not necessarily remove stubborn bird droppings, pollen, grime and other deposits. Regular professional cleaning can provide a more thorough clean than rainfall alone.
Yes, we provide professional solar panel cleaning in Great Shelford, helping domestic and commercial customers keep their solar panels clean, clear and properly maintained.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
