Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
Things get added to buildings after an array is installed, and some of them cast shadows nobody accounted for. Aerials and satellite dishes are the commonest. Fitted years after commissioning by somebody with no reason to think about the modules below, they can throw a narrow shadow across part of an array for a portion of the day. A flue terminal added with a new appliance does the same, and adds a deposit of its own. Extensions, dormers and outbuildings are the larger version. A structure built next door or at the end of a garden can shade an array in winter that was entirely clear in summer, since the sun sits lower and the shadows run longer. Vegetation is the slow one. A tree planted at head height twenty years ago is not at head height now. The interaction with soiling matters. A shaded section dries more slowly, so algae establish there first and the growth compounds the shading already present. Cleaning cannot remove the shadow, but it removes everything the shadow encouraged — which on many arrays is the larger share of the loss. The method is unchanged. Purified water, filtered and passed through deionising resin until it carries effectively no dissolved solids, applied at low pressure through a soft filament brush, with bonded material given dwell, the frame line cleared specifically and the glass left to dry clear. Owners in Harston who have added anything above an array should expect solar panel cleaning to be worth arranging more often on the affected section. Establishing what has changed around an installation is part of any sensible assessment, and it takes only a few minutes to do properly.
Noticing what has changed around an array is part of a useful assessment, and it is the kind of thing an owner rarely spots for themselves. An aerial fitted three years ago, a flue added with a new boiler, a structure that has gone up beyond a boundary, or planting that has finally reached the height where it matters — all of them change how an array behaves, and none of them announces itself. Where something is casting a shadow, it is pointed out along with what it is likely doing. Where it is depositing residue as well as shade, that is mentioned too. No recommendation is offered about altering anything, since that is not a cleaning contractor’s business, but knowing is better than not. The work itself is fixed. Pro Clean Xtreme applies the same standard on every array regardless of what surrounds it: purified water produced through filtration and deionising resin, never taken from a tap. Soft filament brush heads with cushioned bumpers. Low pressure throughout, with nothing directed at frame seals, flashings, drainage openings or junction boxes. No operative putting weight on a module at any point, since the resulting microcracking is permanent and never becomes visible. Full coverage of every panel including the frame line and lower edges, with the shaded sections given the extra dwell they usually need. Public liability insurance and a risk assessment matched to the actual height and configuration sit behind every visit, and photographs follow afterwards. Householders in Harston searching solar panel cleaning near me should expect the surroundings assessed as well as the glass. Photographs follow afterwards showing the array before and after, taken close enough to show the affected sections clearly.
Shaded sections cost more to clean and are worth cleaning more often, which is a combination that catches owners out if nobody explains it. The additional cost is dwell rather than difficulty. A section that dries slowly carries more established growth at the frame line, and that comes away with wetting, waiting and repeated gentle passes rather than force. On an array where one portion is shaded and the rest is not, the difference within a single system can be substantial. Above that the standard inputs apply. Module count is charged per panel with the rate improving as arrays grow, because travel, unloading, assembling poles and producing purified water are fixed costs incurred once regardless of how much glass follows them. That fixed portion is why a minimum charge applies and why a very small array never costs proportionally little. Reach adjusts the figure next, with firm level standing and clear room to extend a pole costing least, and unusual height, restricted ground or a genuine requirement for hired access equipment costing more and stated separately. Condition supplies the third and, on a partially shaded array, is assessed across the whole system weighted towards the sections that will take longest. Assessments for properties in Harston are free and carry no obligation, the resulting quote holds on the day, and repeat bookings sit below one-off rates. The price covers the complete array including frames and lower edges, with photographs afterwards. Where an array does not yet warrant a visit, that is the answer given rather than a figure, and the assessment costs nothing either way.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular solar panel cleaning.
Professional solar panel cleaning in Harston offers a simple and effective way to maintain the cleanliness, appearance and performance of your solar panels. Over time, dirt, dust, bird droppings, pollen, leaves, algae and other environmental debris can accumulate across the surface of solar panels, leaving them looking dirty and potentially reducing the amount of sunlight reaching the panels. Regular solar panel cleaning helps remove this unwanted build-up, keeping the panels cleaner and allowing them to receive as much available sunlight as possible. Keeping solar panels clean can also support ongoing maintenance by making it easier to identify visible issues, damage or areas that may require further attention. Professionally cleaned solar panels can improve the overall appearance of your property while helping you get the most from your solar installation. Using suitable cleaning methods and equipment for solar panel surfaces is important to achieve effective results while reducing the risk of scratching, marking or damaging the panels. Whether your solar panels have accumulated bird mess, dust, dirt, pollen, algae or general environmental grime, professional solar panel cleaning in Harston can help keep them cleaner, clearer and better maintained throughout the year.
Commercial buildings accumulate obstructions faster than domestic ones. Plant, ductwork, extraction terminals, communications equipment, safety rails and later extensions all get added to structures that already carry an array, frequently by contractors with no reason to consider what is beneath them. Each one casts a shadow, and a shadow on a large installation costs more than the affected area suggests, since cells wired in series mean a restricted section limits whatever it is wired alongside. Each also creates a slow-drying zone where growth establishes ahead of the rest of the array. Cleaning cannot address the shading itself, but it removes what the shading encourages, and identifying the pattern is part of the survey. Module count, mounting arrangement, obstructions and their positions, structural condition and fragility, edge protection and the safest route to every row are all established, producing a site-specific risk assessment and method statement agreed with the responsible person before dates are confirmed. Ground-level pole work is used where reach permits, with mobile elevating work platforms or rope access where it does not and operatives qualified for the method. Purified water is supplied from tanks brought to site, applied at low pressure through soft brushes, with affected sections given generous dwell, frames and lower edges included, and no chemicals entering drainage. Dated photographs and a written completion record follow every attendance, recorded by row. Operators around Harston should expect commercial solar panel cleaning to identify shaded sections as needing a shorter interval than the rest. Attendance is arranged around the operation, including weekends and out-of-hours, with large arrays phased where continuous access is impractical.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have developed a trusted reputation across Harston for reliable, professional solar panel cleaning. We combine years of experience with specialist cleaning equipment and careful working practices to provide a thorough service for residential and commercial solar installations. Our approach is straightforward and transparent, with every job completed with attention to detail and the condition of the panels in mind. From removing built-up dirt and bird deposits to clearing pollen, dust and other surface debris, we work carefully to leave solar panels clean and clear. Fully insured and committed to high standards of workmanship, we provide a dependable solar panel cleaning service from initial assessment through to completion.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our solar panel cleaning services. If you have a question about your solar panels, a specific cleaning requirement, or need further information about our service, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution for keeping your solar panels clean and well maintained.
The ideal frequency depends on your location, surroundings and how quickly dirt and debris build up. For many properties, an annual clean can help keep panels clear and well maintained.
Yes, keeping panels free from dirt, bird droppings, dust, pollen and other debris allows more sunlight to reach the surface. Cleaning can therefore help your panels operate as efficiently as possible.
Solar panels can collect bird droppings, dust, pollen, leaves, algae, grime and other environmental debris. These deposits can build up over time and affect the cleanliness of the panel surface.
Yes. Professional solar panel cleaning can be carried out on a wide range of domestic and commercial properties, subject to suitable access and safe working conditions.
Professional solar panel cleaning should be carried out using appropriate equipment and techniques designed for solar panel surfaces. Careful cleaning helps remove deposits without unnecessarily damaging or scratching the panels.
Rain can wash away some loose dirt, but it does not necessarily remove stubborn bird droppings, pollen, grime and other deposits. Regular professional cleaning can provide a more thorough clean than rainfall alone.
Yes, we provide professional solar panel cleaning in Harston, helping domestic and commercial customers keep their solar panels clean, clear and properly maintained.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
