Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
Where work is planned on a building, the sequence matters — and cleaning an array before it rather than after is usually the wrong way round. Building work generates material in quantity. Cutting, grinding, sanding and general disturbance all put fine particulate into the air, and much of it is alkaline, abrasive and inclined to bond hard once wetted and dried. An array cleaned the week before scaffolding goes up will be worse than it started by the time the scaffolding comes down. Access is the other consideration and it can work in the owner’s favour. Where scaffolding is already in place for other work, an array that is normally awkward to reach may be straightforward for a period — though only if the arrangement suits the method, since the cleaning is still done from a stable position with a pole rather than by anybody clambering about. The sensible sequence is therefore to clean once the work is genuinely finished and the dust has stopped being generated, treating it as part of putting the building back rather than as preparation. The method is unchanged. Purified water, filtered and passed through deionising resin until it carries effectively no dissolved solids, applied at low pressure through a soft filament brush, with construction residue given generous dwell before anything works across it, since that material scratches a coating if forced. Owners in Little Shelford with work planned should book solar panel cleaning for afterwards rather than before. Treating it as the last job rather than the first saves a visit, and it means the array’s condition is recorded at the point the works finished.
Pro Clean Xtreme will advise waiting where building work is planned or under way, which loses a booking now and keeps one later. Cleaning an array before dust stops being generated is money spent on a result that lasts a fortnight. Saying so is more useful to a customer than taking the work and letting them discover it, and it takes one conversation at the assessment. Where scaffolding is already up for other work and an array would otherwise be difficult to reach, that is worth discussing — provided the arrangement allows the work to be done properly, from a stable position with a pole and without anybody putting weight on the modules. Once the work goes ahead, construction residue is treated with more caution than ordinary soiling. It is abrasive and alkaline, so the array is wetted thoroughly and given generous dwell before anything touches it, then worked gently and rinsed, repeating where material remains. The fixed standards apply throughout. Purified water produced through filtration and deionising resin. Soft filament brush heads with cushioned bumpers. Low pressure, with nothing directed at frame seals, flashings, drainage openings or junction boxes. No operative putting weight on a module at any point. Full coverage of every panel including the frame line and lower edges. Householders in Little Shelford searching solar panel cleaning near me around building work should raise the timing before the price. Public liability insurance and a risk assessment matched to the actual height and configuration sit behind every visit, and photographs follow afterwards. Anything noticed during the work is reported plainly rather than passed over.
Timing a clean around building work saves money rather than costing it, and the saving is simply the visit that does not have to be repeated. An array cleaned before the dust stops will need doing again, so the sensible arrangement is one visit properly placed rather than two badly placed. Where work is already under way, waiting is the advice given rather than a price. Once the timing is right, the figure follows the usual inputs. Module count is charged per panel with the rate improving as arrays grow, because travel, unloading, assembling poles and producing purified water are fixed costs incurred once regardless of how much glass follows them. That fixed portion is why a minimum charge applies and why a very small array never costs proportionally little. Reach adjusts it next, with firm level standing and clear room to extend a pole costing least, and unusual height, restricted ground or a genuine requirement for hired access equipment costing more and stated separately. Condition supplies the third, and on an array carrying construction residue it is usually the largest, since that material needs generous dwell and repeated gentle passes rather than force. Assessments for properties in Little Shelford are free and carry no obligation, the resulting quote holds on the day, and repeat bookings sit below one-off rates. The price covers the complete array including frames and lower edges, with photographs afterwards. Where building work is still under way, waiting is the advice given rather than a price, and the assessment costs nothing either way. Repeat bookings sit below one-off rates once a maintenance cycle is established.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular solar panel cleaning.
Professional solar panel cleaning in Little Shelford offers a simple and effective way to maintain the cleanliness, appearance and performance of your solar panels. Over time, dirt, dust, bird droppings, pollen, leaves, algae and other environmental debris can accumulate across the surface of solar panels, leaving them looking dirty and potentially reducing the amount of sunlight reaching the panels. Regular solar panel cleaning helps remove this unwanted build-up, keeping the panels cleaner and allowing them to receive as much available sunlight as possible. Keeping solar panels clean can also support ongoing maintenance by making it easier to identify visible issues, damage or areas that may require further attention. Professionally cleaned solar panels can improve the overall appearance of your property while helping you get the most from your solar installation. Using suitable cleaning methods and equipment for solar panel surfaces is important to achieve effective results while reducing the risk of scratching, marking or damaging the panels. Whether your solar panels have accumulated bird mess, dust, dirt, pollen, algae or general environmental grime, professional solar panel cleaning in Little Shelford can help keep them cleaner, clearer and better maintained throughout the year.
Commercial projects benefit from cleaning being written into the closing programme rather than arranged separately months later. Any works on a site with an existing installation — extension, refurbishment, resurfacing, demolition or plant replacement — deposit material on the array for the duration, and much of it bonds hard rather than washing off. Cleaning at handover establishes the asset’s condition at the point the works finished, which is useful for both the operator and whoever carried out the work. Timing it earlier achieves nothing, since the array simply refouls, and the cost is incurred twice for one result. Delivery follows the standard process. A survey establishes module count, mounting arrangement, structural condition and fragility, edge protection and the safest route to every row, producing a site-specific risk assessment and method statement agreed with the responsible person before dates are confirmed. Ground-level pole work is used where reach permits, with mobile elevating work platforms or rope access where it does not and operatives qualified for the method. Purified water is supplied from tanks brought to site and applied at low pressure through soft brushes, with construction residue given generous dwell before being worked, frames and lower edges included, and no chemicals entering drainage. Dated photographs and a written completion record follow every attendance and serve as evidence of condition at handover. Operators around Little Shelford completing works on a site with an array should build commercial solar panel cleaning into the final programme. Attendance is arranged around the operation, including weekends and out-of-hours where site activity makes daytime work impractical. Dated photographs and a written completion record follow every attendance without exception.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have developed a trusted reputation across Little Shelford for reliable, professional solar panel cleaning. We combine years of experience with specialist cleaning equipment and careful working practices to provide a thorough service for residential and commercial solar installations. Our approach is straightforward and transparent, with every job completed with attention to detail and the condition of the panels in mind. From removing built-up dirt and bird deposits to clearing pollen, dust and other surface debris, we work carefully to leave solar panels clean and clear. Fully insured and committed to high standards of workmanship, we provide a dependable solar panel cleaning service from initial assessment through to completion.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our solar panel cleaning services. If you have a question about your solar panels, a specific cleaning requirement, or need further information about our service, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution for keeping your solar panels clean and well maintained.
The ideal frequency depends on your location, surroundings and how quickly dirt and debris build up. For many properties, an annual clean can help keep panels clear and well maintained.
Yes, keeping panels free from dirt, bird droppings, dust, pollen and other debris allows more sunlight to reach the surface. Cleaning can therefore help your panels operate as efficiently as possible.
Solar panels can collect bird droppings, dust, pollen, leaves, algae, grime and other environmental debris. These deposits can build up over time and affect the cleanliness of the panel surface.
Yes. Professional solar panel cleaning can be carried out on a wide range of domestic and commercial properties, subject to suitable access and safe working conditions.
Professional solar panel cleaning should be carried out using appropriate equipment and techniques designed for solar panel surfaces. Careful cleaning helps remove deposits without unnecessarily damaging or scratching the panels.
Rain can wash away some loose dirt, but it does not necessarily remove stubborn bird droppings, pollen, grime and other deposits. Regular professional cleaning can provide a more thorough clean than rainfall alone.
Yes, we provide professional solar panel cleaning in Little Shelford, helping domestic and commercial customers keep their solar panels clean, clear and properly maintained.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
