Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
Where an array feeds a battery, soiling affects more than the annual total — it affects when generation arrives, and that changes how much of it gets used. The mechanism is simple enough. A battery fills during the middle of the day when output exceeds household demand, and whatever it holds is available through the evening. A soiled array produces less at every point in the day, which means the surplus above household demand is smaller and the battery takes longer to fill. On shorter days it may not fill at all. The consequence is disproportionate. Lost generation on a system without storage is a smaller export payment. On a system with storage it can mean importing electricity in the evening at retail price, because the battery ran short. The value of the shortfall is therefore higher than the kilowatt-hour figure alone suggests. The same logic applies to time-of-use tariffs, immersion diverters and anything else scheduled around a midday surplus that may not materialise. Cleaning restores the whole profile rather than just the total. Purified water, filtered and passed through deionising resin until it carries effectively no dissolved solids, is applied at low pressure through a soft filament brush on a telescopic pole; bonded material is wetted and given time to soften, the frame line and lower edges are cleared specifically, and the glass is rinsed and left to dry clear without towelling. Nothing abrasive, no detergent, nothing aimed at seals or junction boxes, no weight on the modules. Households in Mepal running storage usually find solar panel cleaning worth arranging on a shorter interval than those without.
Pro Clean Xtreme is straightforward about where the value of a clean actually lands, which on a system with storage is a slightly different conversation from the usual one. The benefit is not only the extra generation but the extra hours the battery spends full, and that is visible in the household’s own import figures rather than in any claim made beforehand. For that reason nothing is promised as a percentage in advance. What is offered is an assessment of the array’s condition, an honest view of whether soiling is likely to be limiting it, and a result the owner can check against their own data afterwards. The work behind it is fixed. Purified water produced through filtration and deionising resin, never taken from a tap, because minerals drying on an anti-reflective coating scatter the light it exists to admit. Soft filament brush heads with cushioned bumpers. Low pressure throughout, with nothing directed at frame seals, flashings or junction boxes. No operative putting weight on a module at any point, since the resulting microcracking is permanent and never becomes visible. Full coverage of every panel including the frame line and lower edges. Public liability insurance and a risk assessment matched to the actual height and configuration sit behind every visit, and work is rescheduled rather than forced when conditions make a long pole unsafe. Photographs follow afterwards. Householders in Mepal searching solar panel cleaners near me with storage fitted should expect the result to show up in their evening import figures over the following weeks rather than only in the daytime generation total.
On a system with storage the return on a clean is higher than the raw generation figure suggests, which makes the cost easier to justify. Electricity recovered and stored displaces units that would otherwise be imported in the evening at retail price, rather than being exported at a lower rate — so the same kilowatt-hours are simply worth more. The visit itself is priced from module count, charged per panel with the rate improving as arrays grow. Travel, unloading, assembling poles and producing purified water are fixed costs incurred once regardless of how much glass follows them, so that portion spreads further across a larger system — which is also why a minimum charge applies and why a very small array never costs proportionally little. Reach adjusts the figure next. An accessible elevation with firm level standing and clear room to extend a pole is the least expensive arrangement, while unusual height, restricted ground and obstructions between the operative and the wall all lengthen the work. Where hired access equipment is genuinely required it appears as a separate stated item rather than being folded quietly into the rate. Condition supplies the third input, since consolidated film and established growth come away with dwell time and repeated gentle passes rather than force. Assessments for properties in Mepal are free and carry no obligation, the resulting quote holds on the day, and repeat bookings sit below one-off rates. The price covers the complete array including frames and lower edges, purified water throughout and photographs afterwards, with nothing appearing as an extra once the work is complete.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular solar panel cleaning.
Professional solar panel cleaning in Mepal offers a simple and effective way to maintain the cleanliness, appearance and performance of your solar panels. Over time, dirt, dust, bird droppings, pollen, leaves, algae and other environmental debris can accumulate across the surface of solar panels, leaving them looking dirty and potentially reducing the amount of sunlight reaching the panels. Regular solar panel cleaning helps remove this unwanted build-up, keeping the panels cleaner and allowing them to receive as much available sunlight as possible. Keeping solar panels clean can also support ongoing maintenance by making it easier to identify visible issues, damage or areas that may require further attention. Professionally cleaned solar panels can improve the overall appearance of your property while helping you get the most from your solar installation. Using suitable cleaning methods and equipment for solar panel surfaces is important to achieve effective results while reducing the risk of scratching, marking or damaging the panels. Whether your solar panels have accumulated bird mess, dust, dirt, pollen, algae or general environmental grime, professional solar panel cleaning in Mepal can help keep them cleaner, clearer and better maintained throughout the year.
Commercial sites with storage or high daytime self-consumption have the same profile sensitivity as domestic ones, magnified by scale. Where an installation is sized to cover a production load through the working day, a soiling loss does not simply reduce export — it shifts the point at which the site starts importing, and imported units at commercial rates are the expensive ones. The same applies to sites using generation to charge vehicle fleets, run refrigeration or offset a predictable midday demand. The value of a clean is therefore measured against import displaced rather than export forgone, which usually makes a shorter interval straightforward to justify. Delivery is surveyed and documented in advance. Module count, mounting arrangement, structural condition and fragility, edge protection and the safest route to every row are established, producing a site-specific risk assessment and method statement agreed with the responsible person before dates are confirmed. Ground-level pole work is used where reach permits, with mobile elevating work platforms or rope access where it does not and operatives qualified for the method. Purified water is supplied from tanks brought to site, applied at low pressure through soft brushes, with frames and lower edges cleaned alongside the glass and no chemicals entering drainage. Attendance is arranged around the operation, including weekends and out-of-hours, with large arrays phased where continuous access is impractical. Dated photographs and a written completion record follow every visit, and operators around Mepal with storage generally set the commercial solar panel cleaning interval from import data as much as from generation figures, since that is where the value of the recovered output actually appears.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have developed a trusted reputation across Mepal for reliable, professional solar panel cleaning. We combine years of experience with specialist cleaning equipment and careful working practices to provide a thorough service for residential and commercial solar installations. Our approach is straightforward and transparent, with every job completed with attention to detail and the condition of the panels in mind. From removing built-up dirt and bird deposits to clearing pollen, dust and other surface debris, we work carefully to leave solar panels clean and clear. Fully insured and committed to high standards of workmanship, we provide a dependable solar panel cleaning service from initial assessment through to completion.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our solar panel cleaning services. If you have a question about your solar panels, a specific cleaning requirement, or need further information about our service, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution for keeping your solar panels clean and well maintained.
The ideal frequency depends on your location, surroundings and how quickly dirt and debris build up. For many properties, an annual clean can help keep panels clear and well maintained.
Yes, keeping panels free from dirt, bird droppings, dust, pollen and other debris allows more sunlight to reach the surface. Cleaning can therefore help your panels operate as efficiently as possible.
Solar panels can collect bird droppings, dust, pollen, leaves, algae, grime and other environmental debris. These deposits can build up over time and affect the cleanliness of the panel surface.
Yes. Professional solar panel cleaning can be carried out on a wide range of domestic and commercial properties, subject to suitable access and safe working conditions.
Professional solar panel cleaning should be carried out using appropriate equipment and techniques designed for solar panel surfaces. Careful cleaning helps remove deposits without unnecessarily damaging or scratching the panels.
Rain can wash away some loose dirt, but it does not necessarily remove stubborn bird droppings, pollen, grime and other deposits. Regular professional cleaning can provide a more thorough clean than rainfall alone.
Yes, we provide professional solar panel cleaning in Mepal, helping domestic and commercial customers keep their solar panels clean, clear and properly maintained.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
