Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
An owner wanting more electricity from a photovoltaic system has a handful of options, and they differ enormously in cost. Adding modules is the obvious one, and it works, but it means capital outlay, possible inverter changes and whatever the installation involves at the property. Replacing an older array with more efficient panels is more expensive still. Adding power optimisers to reduce shading losses has a real effect on some systems and requires an installer and a day’s work. Cleaning sits at the opposite end of that scale. It costs a fraction of any of them, involves no alteration to the installation, takes a couple of hours and recovers generation the system was designed to produce in the first place. On an array carrying several years of accumulated soiling, the improvement can be larger than what a modest capacity increase would deliver — and it is available immediately. The obvious limitation is that it is finite. Cleaning recovers what soiling took and nothing beyond it, so a well-maintained array has less to gain than a neglected one. That is a reason to check rather than a reason to skip it. The work itself is unremarkable. Purified water, filtered and passed through deionising resin so it carries effectively no dissolved solids, is applied at low pressure through a soft filament brush on a telescopic pole. Bonded material is wetted and given time to soften, the frame line and lower edges are cleared specifically, and the glass is rinsed and left to dry clear. Nothing abrasive, no detergent, nothing aimed at seals or junction boxes, no weight on the modules. Owners in Murrow considering how to improve output usually find solar panel cleaning the cheapest place to start.
Pro Clean Xtreme is clear about the ceiling on what cleaning can deliver, which is the only honest way to sell it. An array washed last year has little to recover and will be told so. An array untouched for a decade has a great deal, and the photographs from the visit will make that obvious. Neither position benefits from a percentage figure quoted in advance, because soiling losses vary enormously with pitch, exposure and what surrounds a property. What is offered instead is a straight assessment and a result that can be checked afterwards, either against year-on-year generation figures for the same period or against photographs taken close enough to show the frame line rather than a flattering view from the drive. The work behind it is fixed. Purified water produced through filtration and deionising resin, never taken from a tap. Soft filament brush heads. Low pressure throughout, with nothing directed at frame seals, flashings or junction boxes. No operative putting weight on a module at any point, since the microcracking that causes is permanent and never becomes visible. Full coverage of every panel including the frame line and lower edges. Public liability insurance and a risk assessment matched to the actual height and configuration sit behind every job, and visits are rescheduled rather than forced when conditions make a long pole unsafe. Householders in Murrow searching solar panel cleaning near me generally prefer a realistic answer to an impressive one, particularly where they intend to book the same firm again the following year and the year after that.
Measured against anything else that increases output from a photovoltaic system, cleaning is inexpensive, and the comparison is worth making before deciding it is not worth arranging. The figure comes from module count first, charged per panel with the rate improving as arrays grow, because travel, unloading, assembling poles and producing purified water are fixed costs incurred once regardless of how much glass follows them. That fixed portion is why a minimum charge applies and why a very small array never costs proportionally little. Reach comes second. An accessible elevation with firm level standing and clear room to extend a pole is the least expensive arrangement, while unusual height, restricted ground and obstructions between the operative and the wall all lengthen the work. Where hired access equipment is genuinely required it appears as a separate stated item rather than being folded quietly into the rate. Condition comes third and determines how much there is to recover as well as how long the work takes. A maintained array is a routine wash with modest gains; one carrying years of consolidated film and established growth needs dwell time and repeated gentle passes, and generally delivers the largest improvement of any visit. Assessments for properties in Murrow are free and carry no obligation, and where an array is unlikely to gain much, that is the answer given rather than a price. Repeat bookings sit below one-off rates, and the quoted figure covers the complete array including frames and lower edges, purified water throughout and photographs afterwards, so the result can be judged rather than taken on trust.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular solar panel cleaning.
Professional solar panel cleaning in Murrow offers a simple and effective way to maintain the cleanliness, appearance and performance of your solar panels. Over time, dirt, dust, bird droppings, pollen, leaves, algae and other environmental debris can accumulate across the surface of solar panels, leaving them looking dirty and potentially reducing the amount of sunlight reaching the panels. Regular solar panel cleaning helps remove this unwanted build-up, keeping the panels cleaner and allowing them to receive as much available sunlight as possible. Keeping solar panels clean can also support ongoing maintenance by making it easier to identify visible issues, damage or areas that may require further attention. Professionally cleaned solar panels can improve the overall appearance of your property while helping you get the most from your solar installation. Using suitable cleaning methods and equipment for solar panel surfaces is important to achieve effective results while reducing the risk of scratching, marking or damaging the panels. Whether your solar panels have accumulated bird mess, dust, dirt, pollen, algae or general environmental grime, professional solar panel cleaning in Murrow can help keep them cleaner, clearer and better maintained throughout the year.
Commercial operators evaluating ways to lift output from an existing installation usually find cleaning the cheapest option available by a wide margin. Extending an array means capital expenditure, planning considerations and possibly grid connection work. Replacing modules is more expensive again. Cleaning requires no alteration to the asset and recovers generation the system was specified to produce. It is also the easiest to evidence. Comparing output either side of a clean, normalised against irradiance, shows exactly what was recovered, and tracking the drift afterwards establishes how quickly the site fouls — which converts a one-off improvement into a defensible recurring budget line. Delivery is surveyed and documented in advance. Module count, mounting arrangement, structural condition and fragility, edge protection and the safest route to every row are established, producing a site-specific risk assessment and method statement agreed with the responsible person before dates are confirmed. Ground-level pole work is used where reach permits, with mobile elevating work platforms or rope access where it does not and operatives qualified for the method. Purified water is supplied from tanks brought to site, applied at low pressure through soft brushes, with frames and lower edges cleaned alongside the glass and no chemicals entering drainage. Attendance is arranged around the operation, including weekends and out-of-hours, with large arrays phased where continuous access is impractical. Dated photographs and a written completion record follow every visit, and operators around Murrow generally establish the value of commercial solar panel cleaning within the first full cycle, after which it becomes a routine budget line rather than a proposal.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have developed a trusted reputation across Murrow for reliable, professional solar panel cleaning. We combine years of experience with specialist cleaning equipment and careful working practices to provide a thorough service for residential and commercial solar installations. Our approach is straightforward and transparent, with every job completed with attention to detail and the condition of the panels in mind. From removing built-up dirt and bird deposits to clearing pollen, dust and other surface debris, we work carefully to leave solar panels clean and clear. Fully insured and committed to high standards of workmanship, we provide a dependable solar panel cleaning service from initial assessment through to completion.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our solar panel cleaning services. If you have a question about your solar panels, a specific cleaning requirement, or need further information about our service, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution for keeping your solar panels clean and well maintained.
The ideal frequency depends on your location, surroundings and how quickly dirt and debris build up. For many properties, an annual clean can help keep panels clear and well maintained.
Yes, keeping panels free from dirt, bird droppings, dust, pollen and other debris allows more sunlight to reach the surface. Cleaning can therefore help your panels operate as efficiently as possible.
Solar panels can collect bird droppings, dust, pollen, leaves, algae, grime and other environmental debris. These deposits can build up over time and affect the cleanliness of the panel surface.
Yes. Professional solar panel cleaning can be carried out on a wide range of domestic and commercial properties, subject to suitable access and safe working conditions.
Professional solar panel cleaning should be carried out using appropriate equipment and techniques designed for solar panel surfaces. Careful cleaning helps remove deposits without unnecessarily damaging or scratching the panels.
Rain can wash away some loose dirt, but it does not necessarily remove stubborn bird droppings, pollen, grime and other deposits. Regular professional cleaning can provide a more thorough clean than rainfall alone.
Yes, we provide professional solar panel cleaning in Murrow, helping domestic and commercial customers keep their solar panels clean, clear and properly maintained.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
