Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
Cleaning an array is one of the few maintenance activities that pays back environmentally as well as financially, and the arithmetic is unusually simple. A soiled system produces less low-carbon electricity than it was designed to, and whatever it fails to produce is supplied from the grid instead. Restoring the output therefore displaces generation from elsewhere, continuously, for as long as the array stays clean. On a system that has gone years without attention, the recovered generation across the following months substantially exceeds anything the visit itself consumed. What the visit consumes is modest. Water, in a volume most people overestimate, carried to the property rather than drawn from the household supply. A short journey and a small pump. No chemicals at all, so nothing to manufacture, transport, contain or dispose of, and nothing entering drainage afterwards — runoff is water and dissolved soiling. There is a second consideration. Cleaning extends the useful working condition of an installation that already exists, which is a considerably lower-impact way of getting electricity than manufacturing and installing additional capacity. Making better use of what is on the building beats adding to it. The method supports that. Purified water, produced through filtration and deionising resin until it carries effectively no dissolved solids, is applied at low pressure through a soft filament brush; bonded material is wetted and given time to soften, the frame line is cleared specifically, and the glass dries clear without towelling. Nothing abrasive, nothing chemical, no weight on the modules. For households in Stretham, solar panel cleaning is about the least intrusive maintenance a property receives.
Pro Clean Xtreme uses nothing on an array beyond purified water, and that is a technical decision rather than a positioning exercise. Detergents and solvents are unnecessary — mineral-free water lifts soiling into solution on its own — and they leave a surfactant residue that attracts the next layer of dust faster than bare glass would. Adding a chemical would make the result worse as well as the runoff more complicated. The practical consequences are worth stating. Planting beneath an array is unaffected. Drainage takes nothing it should not. Surfaces wetted during the work dry without marking, since the water carries nothing to leave behind. There is no containment requirement and nothing to dispose of afterwards. The rest of the standard is fixed. Water produced through filtration and deionising resin, never taken from a tap. Soft filament brush heads with cushioned bumpers. Low pressure throughout, with nothing directed at frame seals, flashings or junction boxes. No operative putting weight on a module at any point, since the resulting microcracking is permanent and never becomes visible. Full coverage of every panel including the frame line and lower edges. Public liability insurance and a risk assessment matched to the actual height and configuration sit behind every visit, and work is rescheduled rather than forced when conditions make a long pole unsafe. Photographs follow afterwards. Householders in Stretham searching solar panel cleaning near me with an interest in how the work is actually done will find the answer refreshingly short. Water, brushes and time account for the whole of it, and the first of those three arrives already purified.
Value here is easier to see when the recovered generation is counted alongside the invoice, because the two are related in a way they are not for most maintenance. An array losing output to soiling is buying electricity it should have been producing, month after month, and that cost never appears as a bill for cleaning — it appears as a slightly larger one from the supplier. Restoring the output stops it. On a neglected system the recovered generation over the following year frequently covers a good share of the visit. The visit is priced from module count, charged per panel with the rate improving as arrays grow, because travel, unloading, assembling poles and producing purified water are fixed costs incurred once regardless of how much glass follows them. That fixed portion is why a minimum charge applies and why a very small array never costs proportionally little. Reach adjusts it next. Firm level standing with clear room to extend a pole is the least expensive arrangement, while unusual height, restricted ground and obstructions between the operative and the wall all lengthen the work, and where hired access equipment is genuinely required it appears as a separate stated item. Condition supplies the third input, since consolidated film and established growth come away with dwell time and repeated gentle passes rather than force. Assessments for properties in Stretham are free and carry no obligation, repeat bookings sit below one-off rates, and the quoted figure covers the complete array including frames and lower edges, purified water throughout and photographs afterwards, with nothing appearing as an extra once the work is complete.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular solar panel cleaning.
Professional solar panel cleaning in Stretham offers a simple and effective way to maintain the cleanliness, appearance and performance of your solar panels. Over time, dirt, dust, bird droppings, pollen, leaves, algae and other environmental debris can accumulate across the surface of solar panels, leaving them looking dirty and potentially reducing the amount of sunlight reaching the panels. Regular solar panel cleaning helps remove this unwanted build-up, keeping the panels cleaner and allowing them to receive as much available sunlight as possible. Keeping solar panels clean can also support ongoing maintenance by making it easier to identify visible issues, damage or areas that may require further attention. Professionally cleaned solar panels can improve the overall appearance of your property while helping you get the most from your solar installation. Using suitable cleaning methods and equipment for solar panel surfaces is important to achieve effective results while reducing the risk of scratching, marking or damaging the panels. Whether your solar panels have accumulated bird mess, dust, dirt, pollen, algae or general environmental grime, professional solar panel cleaning in Stretham can help keep them cleaner, clearer and better maintained throughout the year.
Organisations reporting on energy and carbon performance have a direct interest in array cleaning, because it improves a reported figure without capital expenditure. Generation recovered from an existing installation counts in exactly the same way as generation from new capacity, and it is available within a day rather than a procurement cycle. It is also straightforward to evidence. Comparing output either side of a clean, normalised against irradiance, quantifies what was recovered, and dated photographs and written completion records from each visit provide the supporting documentation. The work introduces nothing that needs managing. Purified water is supplied from tanks brought to site, so nothing draws on the client’s connection. No detergents, solvents or biocides are used at any stage, which means no substance to record, no containment requirement, no interceptor concern and nothing that could reach a watercourse through surface drainage. Delivery is surveyed and documented in advance. Module count, mounting arrangement, structural condition and fragility, edge protection and the safest route to every row are established, producing a site-specific risk assessment and method statement agreed with the responsible person before dates are confirmed. Ground-level pole work is used where reach permits, with mobile elevating work platforms or rope access where it does not and operatives qualified for the method. Attendance is arranged around the operation, including weekends and out-of-hours, with large arrays phased where continuous access is impractical. Operators around Stretham increasingly treat commercial solar panel cleaning as an energy measure rather than a maintenance one, and budget for it out of the corresponding line rather than from general property upkeep.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have developed a trusted reputation across Stretham for reliable, professional solar panel cleaning. We combine years of experience with specialist cleaning equipment and careful working practices to provide a thorough service for residential and commercial solar installations. Our approach is straightforward and transparent, with every job completed with attention to detail and the condition of the panels in mind. From removing built-up dirt and bird deposits to clearing pollen, dust and other surface debris, we work carefully to leave solar panels clean and clear. Fully insured and committed to high standards of workmanship, we provide a dependable solar panel cleaning service from initial assessment through to completion.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our solar panel cleaning services. If you have a question about your solar panels, a specific cleaning requirement, or need further information about our service, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution for keeping your solar panels clean and well maintained.
The ideal frequency depends on your location, surroundings and how quickly dirt and debris build up. For many properties, an annual clean can help keep panels clear and well maintained.
Yes, keeping panels free from dirt, bird droppings, dust, pollen and other debris allows more sunlight to reach the surface. Cleaning can therefore help your panels operate as efficiently as possible.
Solar panels can collect bird droppings, dust, pollen, leaves, algae, grime and other environmental debris. These deposits can build up over time and affect the cleanliness of the panel surface.
Yes. Professional solar panel cleaning can be carried out on a wide range of domestic and commercial properties, subject to suitable access and safe working conditions.
Professional solar panel cleaning should be carried out using appropriate equipment and techniques designed for solar panel surfaces. Careful cleaning helps remove deposits without unnecessarily damaging or scratching the panels.
Rain can wash away some loose dirt, but it does not necessarily remove stubborn bird droppings, pollen, grime and other deposits. Regular professional cleaning can provide a more thorough clean than rainfall alone.
Yes, we provide professional solar panel cleaning in Stretham, helping domestic and commercial customers keep their solar panels clean, clear and properly maintained.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
