Menu
Domestic Services
Commercial Services
cherry picker hire
Contact Us
Knowing what happens on the day removes most of the uncertainty about booking a clean. The visit begins on the ground rather than at the array: a look at its condition from a distance, a check of the standing ground and the approach, and a decision about where the pole will be set up to reach every row without strain. Equipment comes next. Purified water is either drawn from the tank on the vehicle or produced through the filtration and deionising system on board, then fed up a telescopic carbon-fibre pole to a soft filament brush head. The first pass wets the glass and softens whatever has bonded to it, and on neglected arrays that softening time is what does most of the work. Then the array is worked methodically, row by row, brushing gently to lift the loosened film and paying particular attention to the lower edges and frames where growth establishes and debris collects. A final rinse with pure water follows, and because the mineral content has been removed the glass dries by itself with no towelling, no streaking and no spotting. Nobody stands on the modules at any point, no detergents are used, and pressure remains low throughout — high pressure achieves nothing on glass and risks the frame seals and the junction box behind the laminate. The whole thing takes an hour or two on a typical domestic system. Afterwards, photographs go through showing the array before and after. For most homes in Yaxley that is the entire commitment involved in solar panel cleaning, repeated annually, which is a modest amount of disruption for the output it keeps in place.
Reliability is an unglamorous selling point and the one customers actually care about. An array cleaned to a high standard six weeks after it was promised is worse value than a competent clean done on the day agreed, because the whole point of maintenance is that it happens on schedule. Working consistently across the Yaxley area supports that directly. Short travel distances make tight arrival windows realistic rather than optimistic, allow a visit postponed by wind or frost to be rescheduled within days instead of weeks, and make it practical to fit a domestic clean around working hours. Behind the scheduling sits a fixed technical standard. Purified water on every job. Soft brush heads and low pressure. Nothing directed at frame seals or junction boxes. No operative standing on modules at any point, since foot traffic causes microcracking that permanently reduces output without ever being visible. Full public liability cover and a risk assessment matched to the actual height of the installation. Communication closes the loop. Quotes follow an assessment of the property rather than an average applied blind, so the figure holds. Photographs arrive afterwards showing the state of the glass before and after. Anything spotted during the work — a loose clamp, a damaged module, debris trapped behind a frame — gets reported rather than left. People searching solar panel cleaners near me are rarely looking for anything exotic. They want someone competent who turns up, does the whole array properly and charges what was quoted, and who will still be answering the phone when next year’s clean is due.
Treated as a line in the annual cost of running a system, cleaning is one of the smaller entries and one of the few with a directly measurable return. A domestic array of average size carries a modest yearly figure, and the generation restored across the following months typically accounts for a good part of it. The number itself comes from three inputs. Module count is priced per panel with the rate improving on larger systems, since set-up time is fixed regardless of how much glass follows it. Reach determines the working method, with ground-level pole work on an accessible elevation costing least and awkward height, restricted standing ground or genuine need for powered access costing more. Condition adjusts the rest: a maintained array is a straightforward wash, while one left for years needs repeated patient passes to remove established growth. Pro Clean Xtreme quotes after looking at the property rather than over the telephone, which is why the figure given holds on the day. It covers the full array including frames and edges, purified water throughout and photographs afterwards, so there is no separate charge appearing for anything a complete clean should already include. Recurring visits are priced below one-off calls. That reflects both the survey already being done and the reality that a regularly cleaned array takes less work each time. For most households in Yaxley an annual booking works out cheaper across several years than occasional restorative cleans, and it removes the slow unnoticed decline in output that happens in between. Quotations are free and carry no obligation.
Remove years of dirt, grime, algae and staining for a cleaner, fresher finish.
Professional techniques designed to protect your surfaces while delivering outstanding results.
Keep your property looking its best with regular solar panel cleaning.
Professional solar panel cleaning in Yaxley offers a simple and effective way to maintain the cleanliness, appearance and performance of your solar panels. Over time, dirt, dust, bird droppings, pollen, leaves, algae and other environmental debris can accumulate across the surface of solar panels, leaving them looking dirty and potentially reducing the amount of sunlight reaching the panels. Regular solar panel cleaning helps remove this unwanted build-up, keeping the panels cleaner and allowing them to receive as much available sunlight as possible. Keeping solar panels clean can also support ongoing maintenance by making it easier to identify visible issues, damage or areas that may require further attention. Professionally cleaned solar panels can improve the overall appearance of your property while helping you get the most from your solar installation. Using suitable cleaning methods and equipment for solar panel surfaces is important to achieve effective results while reducing the risk of scratching, marking or damaging the panels. Whether your solar panels have accumulated bird mess, dust, dirt, pollen, algae or general environmental grime, professional solar panel cleaning in Yaxley can help keep them cleaner, clearer and better maintained throughout the year.
A commercial clean runs to the same technical principles as a domestic one and a completely different logistical plan. The work is agreed well in advance, beginning with a survey of the installation: module count, mounting system, pitch and construction, fragile areas, edge protection, and how operatives will safely reach every row. From that comes a site-specific method statement and risk assessment, submitted for approval before a date is fixed. On the day, set-up is the substantial part. Water tanks are positioned, access equipment is sited with regard to ground bearing and vehicle movements, exclusion zones are established beneath the working area, and permits are signed off with the responsible person. Only then does anyone start cleaning. The cleaning sequence itself is systematic — array worked in defined sections, purified water and soft brushes throughout, low pressure, frames and lower edges included rather than skipped. Larger installations are frequently phased across multiple visits so no part of the site is disrupted for long, and heavily fouled sections get softening time rather than force. Scheduling accommodates the business. Weekend work, early starts and out-of-hours visits are routine where daytime access would interfere with production, deliveries or public movement. Each visit closes with dated photographs and a completion record for the maintenance file, supporting warranty compliance and giving asset managers evidence that a generating installation is maintained on a defined cycle. Sites around Yaxley usually set the interval for commercial solar panel cleaning after reviewing generation figures either side of the first clean, which puts the frequency on evidence rather than guesswork.
Founded in 2016 by Karl Crofts, Pro Clean Xtreme has grown from a dedicated one-man operation into a trusted family-run team. Joined by his wife Lindsay and family members Callum and Rachel, we pride ourselves on delivering professional, safety-first cleaning. By combining honest communication with continuous investment in the industry’s best low-pressure steam equipment and safe access systems, we deliver exceptional results for every residential, commercial, and industrial client.
Founded by Karl Crofts, delivering reliable local service for over a decade.
Our own tracked cherry picker provides safe access without walking on tiles.
Safe low-pressure steam cleaning, softwashing, and specialist pre-solar preparation.
Ten years of trusted, family-run service delivering high-quality workmanship on every project.
As a family-run business established in 2016, we have developed a trusted reputation across Yaxley for reliable, professional solar panel cleaning. We combine years of experience with specialist cleaning equipment and careful working practices to provide a thorough service for residential and commercial solar installations. Our approach is straightforward and transparent, with every job completed with attention to detail and the condition of the panels in mind. From removing built-up dirt and bird deposits to clearing pollen, dust and other surface debris, we work carefully to leave solar panels clean and clear. Fully insured and committed to high standards of workmanship, we provide a dependable solar panel cleaning service from initial assessment through to completion.
We take immense pride in the reputation we have built across Cambridgeshire and the surrounding areas since 2016. As a family-run business, delivering exceptional customer service, honest communication, and high-quality workmanship is at the heart of everything we do. Read through our latest Google reviews to see why residential homeowners, housing associations, and commercial contractors consistently trust Pro Clean Xtreme to safely protect and restore their properties.
Here are the answers to some of the most frequently asked questions about our solar panel cleaning services. If you have a question about your solar panels, a specific cleaning requirement, or need further information about our service, please get in touch with our experienced team. We are always happy to provide advice and help you find the right solution for keeping your solar panels clean and well maintained.
The ideal frequency depends on your location, surroundings and how quickly dirt and debris build up. For many properties, an annual clean can help keep panels clear and well maintained.
Yes, keeping panels free from dirt, bird droppings, dust, pollen and other debris allows more sunlight to reach the surface. Cleaning can therefore help your panels operate as efficiently as possible.
Solar panels can collect bird droppings, dust, pollen, leaves, algae, grime and other environmental debris. These deposits can build up over time and affect the cleanliness of the panel surface.
Yes. Professional solar panel cleaning can be carried out on a wide range of domestic and commercial properties, subject to suitable access and safe working conditions.
Professional solar panel cleaning should be carried out using appropriate equipment and techniques designed for solar panel surfaces. Careful cleaning helps remove deposits without unnecessarily damaging or scratching the panels.
Rain can wash away some loose dirt, but it does not necessarily remove stubborn bird droppings, pollen, grime and other deposits. Regular professional cleaning can provide a more thorough clean than rainfall alone.
Yes, we provide professional solar panel cleaning in Yaxley, helping domestic and commercial customers keep their solar panels clean, clear and properly maintained.
Getting an initial estimate for your property is completely effortless. Simply fill out the form below with your full property address, and our family-run team will utilise Google Earth before providing a quotation. Whether you are a homeowner, a housing association, or an installation company preparing a site, let us know your specific requirements and we will get back to you promptly with an initial assessment.
